6991PE21Q000001 SOW Laboratory Analysis 2021-2025 10.01.20.pdf

Laboratory Analysis Services SOW Page 1

Statement of Work (SOW) Laboratory Analysis Services

Provide laboratory services to perform analyses of potable water, vessel bilge water, stormwater runoff, paint waste, solid and liquid Polychlorinated Biphenyls (PCBs) and presumed asbestos containing material as described below. The laboratory must be American Industrial Hygiene Association Environmental Lead Laboratory Accreditation Program (AIHA ELLAP)-accredited and also have California Environmental Laboratory Accreditation Program (ELAP) certification.

In all cases, samples will be obtained by personnel of US DOT Maritime Administration, Suisun Bay Reserve Fleet (SBRF), 2595 Lake Herman Road, Benicia, CA 94510.

The Contractor is to provide sample collection containers, labels and pre-prepared chain of custody forms, pick up the samples from SBRF according to the timeframes specified below, perform analytical testing, and provide reports for following tasks.

Potable Water

Analyze potable water samples for the following:

• Total Coliform and E-Coli

• CAM-17 metals

• Chlorine

• Total Dissolved Solids

• Total Organic Carbons

Maximum number of samples to be tested per year: 12

Contractor will prepare and supply, with the appropriate preservatives as applicable, sample collection kits for the above tests. Contractor will deliver up to four sample collection container kits to SBRF upon request. Contractor will pick up the sample collection containers within 24 hours (except weekends and government holidays) upon notice from

SBRF.

For each potable water sampling, the contractor will provide SBRF a lab analysis report with an original signature of a certified lab technician qualified to analyze and interpret sample testing results. Contractor will provide a written report to the Contracting Officer’s Representative (COR) of sample test results within ten (10) days of receipt of the samples from SBRF.

These services will be requested as needed.

Laboratory Analysis Services SOW Page 2

Bilge Water

Analyze bilge water samples for the pollutants listed in Table 2, City of Benicia POTW Required Testing, according to the methods and minimum detection limits shown in the table.

Maximum number of sampling events to be tested per year: 10

Contractor will prepare and supply, with the appropriate preservatives as applicable, sample collection kits for the above tests. Contractor will deliver up to four sample collection container kits to SBRF upon request. Contractor will pick up the sample collection containers within 24 hours (except weekends and government holidays) upon notice from

SBRF.

For each bilge water sampling, the contractor will provide SBRF a lab analysis report with an original signature of a certified lab technician qualified to analyze and interpret sample testing results. Contractor will provide a written report to the COR of sample test results within ten (10) days of receipt of the samples from SBRF.

These services will be requested as needed.

Storm Water, including Total Metals

Analyze storm water samples for the constituents listed in Table 1, Parameter Benchmark Values. Of the metals listed, testing will be for Total Metals only.

The method for metals shall be EPA 6020 (metals) and EPA 1631 (mercury), so that the Practical Quantitation Limits (equipment detection limits) are equal to or less than the Benchmark Values (BMVs) and Environmental Screening Levels (ESLs), whichever is less.

Maximum number of samples to be tested per year: 40

Contractor will prepare and supply, with the appropriate preservatives as applicable, sample collection kits for the above tests. Contractor will deliver up to 12 sample collection container kits to SBRF upon request. Contractor will pick up as many as 10 filled sample collection container kits within 24 hours (except weekends and government holidays) upon notice from SBRF.

For each storm water sampling event, the contractor will provide SBRF a lab analysis report with an original signature of a certified lab technician qualified to analyze and interpret sample testing results. Contractor will provide a written report to the COR of sample test results within ten (10) days of receipt of the samples from SBRF.

These services will be requested a few days before and immediately following a qualifying rain event.

Laboratory Analysis Services SOW Page 3

Storm Water, including Total and Dissolved Metals

Analyze storm water samples for the constituents listed in Table 1, Parameter Benchmark Values. Of the metals listed, testing will be for both Total and Dissolved Metals.

The method for metals shall be EPA 6020 (metals) and EPA 1631 (mercury), so that the Practical Quantitation Limits (equipment detection limits) are equal to or less than the Benchmark Values (BMVs) and Environmental Screening Levels (ESLs), whichever is less.

Maximum number of samples to be tested per year: 10

Contractor will prepare and supply, with the appropriate preservatives as applicable, sample collection kits for the above tests. Contractor will deliver up to four sample collection container kits to the SBRF upon request from SBRF. Contractor will pick up as many as four filled sample collection containers within 24 hours (except weekends and government holidays) upon notice from SBRF.

For each storm water sampling event, the contractor will provide SBRF a lab analysis report with an original signature of a certified lab technician qualified to analyze and interpret sample testing results. Contractor will provide a written report to the COR of sample test results within ten (10) days of receipt of the samples from SBRF.

These services will be requested a few days before and immediately following a qualifying rain event).

PCBs

Analyze waste (solid and liquid) for the following constituents:

• Polychlorinated Biphenyls, test for PCB 1016, 1221, 1232, 1242, 1248, 1254, 1260, 1262, 1268, 8082a and Total PCB’s.

Maximum number of tests per year: 10

Contractor will prepare and supply, with the appropriate preservatives as applicable, sample collection kits for the above tests. Contractor will deliver up to four sample collection container kits to SBRF upon request. Contractor will pick up sample collection containers within 24 hours (except weekends and government holidays) upon notice from SBRF.

For each PCB sample, the contractor will provide SBRF a lab analysis report with an original signature of a certified lab technician qualified to analyze and interpret sample testing results.

Contractor will provide a written report to the COR of sample test results within ten (10) days of receipt of the samples from SBRF.

Laboratory Analysis Services SOW Page 4

Paint Waste

Analyze paint waste (exfoliated, chipped, and other) samples(s) for the following constituents:

• CAM17: Constituents identified in Table 2. (results in µg/L)

• Polychlorinated Biphenyls, test for PCB 1016, 1221, 1232, 1242, 1248, 1254, 1260, 1262, 1268, 8082a and Total PCB’s (results in µg/L)

Maximum number of tests per year: 25

SBRF will provide the sample containers. Contractor will pick up sample collection containers within 24 hours (except weekends and government holidays) upon notice from

SBRF.

For each paint waste sample, the contractor will provide SBRF a lab analysis report with an original signature of a certified lab technician qualified to analyze and interpret sample testing results. Contractor will provide a written report to the COR of sample test results within ten (10) days of receipt of the samples from SBRF.

Asbestos, Expedited

Expedited analysis of various materials such as; gaskets, pipe lagging, insulation, wall board, etc.) for:

• Asbestos content using Polarized Light Microscopy method

Maximum number of tests per year: 25

SBRF will provide the sample containers. Contractor will pick up sample collection containers within 24 hours (except weekends and government holidays) upon notice from

SBRF.

For each asbestos sample, the contractor will provide SBRF a lab analysis report with an original signature of a certified lab technician qualified to analyze and interpret sample testing results. Contractor will provide test results by email to the COR on the material tested within 48 hours after receipt of the material.

Laboratory Analysis Services SOW Page 5

Location and hours of operation for supplies being delivered:

Suisun Bay Reserve Fleet 2595 Lake Herman Road Benicia, CA 94510 (Phone) 707 745-0487 (Fax) 707 745-2508 Days and hours of operation are 07:00-17:30, Mon-Fri excluding Holidays.

SBRF observes all federal Holidays observed.

Period of Performance:

The period of performance is a one-year base period plus four (4) one-year option periods:

Base Period: January 5, 2021 – January 4, 2022 Option Period 1: January 5, 2022 – January 4, 2023 Option Period 2: January 5, 2023 – January 4, 2024 Option Period 3: January 5, 2024 – January 4, 2025 Option Period 4: January 5, 2025 – January 4, 2026

An option to extend services (FAR 52.217-8) to allow up to an additional six (6) months of optional performance is also included.