6111-7900 - ORDERING DATA.pdf
PDF 115 KB Posted
- Attached to
- METAL PLATES
- Solicitation number
- SPMYM226Q7295
About this file
This is a Material Ordering Data sheet for structural steel plate specified under MIL-S-22698. The document establishes the technical requirements and ordering parameters for steel plate procurement under IDN N4523A 6111-7900.
The material specification requires DH-36 grade steel plate with Class U-mill finish (hot rolled or normalized) in dimensions of 1-1/4" thickness by 96" width by 20' length. The quantity required is 2 pieces of material (PM). No first article inspection is required, and dimensional tolerances, chemical composition variations, and ultrasonic testing deviations are not applicable to this order. The surface finish is specified as Class U rather than the standard Class P. Preservation, packing, and marking are at the commercial level, with all unit intermediate and shipping containers required to be marked in accordance with MIL-STD-129 per DLA procurement Note C20. The specification references MIL-S-22698C dated 29 JUN 1988, along with amendments and notices through NOTICE 3 dated 29 DEC 2020, and all referenced specifications must be at their latest revision at the time of award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 6106-7906 CDRL.pdf | ||
| 6111-7900 CDRL.pdf | ||
| 6106-7906 - ORDERING DATA.pdf | ||
| Solicitation SPMYM226Q7295.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-22698
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6111-7900
ICN: 88MSM00000 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988. AMENDMENT 1, dated 19 DEC 1988.
AMENDMENT 2, dated 20 OCT 1994. NOTICE 1, dated 8 SEP 1998. NOTICE 2, dated 30 AUG 2002.
NOTICE 3, dated 29 DEC 2020.
B. Grade specified: DH-36
C. Class required: Class U-mill finish (hot rolled or normalized)
D. Plate Size: 1-1/4” THK X 96” WD X 20’ LG.
E. When first article is required: no
F. Dimensional tolerances required: N/A
G. When chemical composition is other than specified: N/A
H. When surface finish is other than Class P: Class U
I. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate, shapes, and bars: N/A
J. Level of preservation, packing, and marking required: Commerical
Additional Data Requirements: QUANTITY REQUIRED: 02 PM
All unit intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA procurement Note C20 for further instructions.
Prepared By: Material and Technical Support Code: 244.4
DJE0078
Cross-Out
File details come from the government source that posted it. Updated .