6106-7906 - ORDERING DATA.pdf
PDF 104 KB Posted
- Attached to
- METAL PLATES
- Solicitation number
- SPMYM226Q7295
About this file
This is a Material Ordering Data sheet that specifies requirements for structural steel plate materials under MIL-S-22698. The document establishes ordering specifications for steel plate, shapes, and bars with weldable ordinary strength and higher strength properties, dated 29 JUN 1988, including amendments and notices through 29 DEC 2020.
The required material specifications include ABS Grade DH-36 steel plate with Class U-mill finish (hot rolled or normalized). The plate dimensions are 1-1/2" thickness by 96" width by 33' length, with a required quantity of 02 PM (pieces/quantities). The ordering data specifies no first article requirement, standard dimensional tolerances are not applicable, chemical composition follows the specification standard, and surface finish is Class U. Ultrasonic (UT) inspection deviations are not applicable. Preservation, packing, and marking must comply with commercial-level standards, and all unit, intermediate, and shipping containers must be marked in accordance with MIL-STD-129 per DLA Procurement Note C20. The material specifications require adherence to the latest revision at time of award. This ordering data was prepared by Material and Technical Support under code 244.4.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 6106-7906 CDRL.pdf | ||
| 6111-7900 - ORDERING DATA.pdf | ||
| 6111-7900 CDRL.pdf | ||
| Solicitation SPMYM226Q7295.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-22698
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6106-7906
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988. AMENDMENT 1, dated 19 DEC 1988.
AMENDMENT 2, dated 20 OCT 1994. NOTICE 1, dated 8 SEP 1998. NOTICE 2, dated 30 AUG 2002.
NOTICE 3, dated 29 DEC 2020.
B. ABS Grade specified: DH-36
C. Class required: Class U-mill finish (hot rolled or normalized)
D. Plate Size: 1-1/2" X 96" WD X 33' THK.
E. When first article is required: NO
F. Dimensional tolerances required: N/A
G. When chemical composition is other than specified: N/A
H. When surface finish is other than Class P: Class U
I. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate, shapes, and bars: N/A
J. Level of preservation, packing, and marking required: Commerical
Additional Data Requirements: QUANTITY REQUIRED: 02 PM
In addition to the requirements of this specification all unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Material and Technical Support Code: 244.4
File details come from the government source that posted it. Updated .