52940252 technical ordering data.pdf

This is a Material Ordering Data sheet for welding consumables specified under NAVSEA Technical Publication T9074-BC-GIB-010/0200, which establishes requirements for filler materials and fluxes used in critical naval applications.

The procurement requests 6,000 pounds of MIL-100S-1F neutral granular flux in 50-pound pails. Materials must comply with AWS A5.01M/A5.01(2019) R2024, AWS A5.23/A5.23M:2025, and AWS A5.02/A5.02M:2025 standards at time of award. Critical acquisition requirements include: electrode and flux combinations must be from the same manufacturer, tested together, and listed on the Qualified Products List (QPL); all check tolerances for mechanical properties and chemical composition shall be used on receipt inspection; fully constrained weldments with fixturing and strongbacks are required for test welds with no alternative restraint methods permitted; weld metal test plates must be in the as-welded condition; and all containers must be hermetically sealed 50-pound pails packaged to maintain flux stability during handling, shipment, storage, stowage, and use. Additional requirements specify that flux must be obtained from the same manufacturer providing the electrode and that the electrode-flux combination must be qualified together. All unit, intermediate, and shipping containers require marking in accordance with MIL-STD-129, with reference to DLA Procurement Note C20 for specific marking instructions.