38KF258203 A01 6 CAPSTAN LOAD TEST SOW for VENDOR.docx
DOCX document 38 KB Posted
- Attached to
- Warping Capstan for Mooring Station load test
- Solicitation number
- N6275826RCPS001
About this file
This Statement of Work (SOW) details a load test for a No.2 Warping Capstan Assembly at Mooring Station No.6 for the U.S. Navy. The project involves testing a specific warping capstan manufactured by JERED LLC (Drawing 20728002) with a static load capacity of 280,000 pounds, located in multiple ship rooms including Stern Gate OPER Gear RM No.2 and Stern Gate MCHRY RM No.2. The contractor is required to provide a floating crane with appropriate load test capacity, install new test label plates, and complete surface preparation according to specified standards.
The related federal contract opportunity indicates this work will be performed at the Sasebo Ship Repair Facility in Japan, with an anticipated performance period from November 1, 2025 to December 31, 2025. The Department of the Navy Naval Supply Systems Command is seeking a contractor to provide materials and equipment for load testing warping capstans at Mooring Stations No.5 and No.6 on an LPD vessel. The solicitation is currently in the pre-solicitation stage, with specific contract details to be discussed with the end user after contract award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 38KF258202 A01 5 CAPSTAN LOAD TEST SOW For Vendor.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. SCOPE:
1.1 Title: No.2 Warping Capstan for Mooring Station No.6; load test
1.2 Location of Work:
1.2.1 Mooring Station No.6 (2-188-4-Q)
1.2.2 Stern Gate OPER Gear RM No.2 (2-194-2-Q)
1.2.3 Stern Gate MCHRY RM No.2 (3-188-6-Q)
1.3 Identification:
1.3.1 Quantity (One AY), No.2 Warping Capstan Assembly and Controller for Mooring Station No.6 located in 1.2.1 through 1.2.3
MFR - JERED LLC
MFR DWG - 20728002
Static Load - 280,000 LBS
APL - 53A030000
2. REFERENCES:
2.1 Standard Items (FY26)
2.2 S9582-BK-MMC-010 Rev 3, Warping Capstan, 30-Inch, Model 20728001 and 21205001
2.3 582-7317959 Rev F, Mooring and Towing Details
2.4 804-1843362 Rev B, Bitts for Synthetic Rope
2.5 Test Procedure (TP) File No.58211-4-100_25193, #2 Warping Capstan (Mooring Station #6)- Load Test
3. REQUIREMENTS:
(V)(G) "LOAD TEST"
3.1 Accomplish the requirements of 2.5 (TP) for load test and inspection of No.2 warping capstan assembly listed in 1.3.1, using 2.2 through 2.4 for guidance. Ship’s Force must operate each equipment. –S246
3.1.1 Provide floating crane which has load capacity specified in 2.5 for load test of warping capstan assembly.
3.1.2 Install each new test label plate upon a satisfactory completion of test.
3.1.3 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.
4. NOTES:
4.1 Initial condition –No.6 mooring station, warping capstan #2 was repaired under ICN 38KF158202, but testing was not completed.
4.2 Regarding work for repair and replacement of slew bearing assembly, shouldered shaft, slew pinion assembly, and motor electric disc brake of No.2 warping capstan assembly listed in 1.3.1 have been completed by another job specification, 3818C58201-A02.
5. GOVERNMENT FURNISHED MATERIAL(GFM):
5.1 None.
ENCLOSURE (A) – 1/1
File details come from the government source that posted it. Updated .