38KF258202 A01 5 CAPSTAN LOAD TEST SOW For Vendor.docx
DOCX document 40 KB Posted
- Attached to
- Warping Capstan for Mooring Station load test
- Solicitation number
- N6275826RCPS001
About this file
This Statement of Work (SOW) details a load test for the No.One Warping Capstan Assembly at Mooring Station No.5, located in a naval facility. The work involves conducting a comprehensive load test on the capstan assembly, with a static load capacity of 280,000 LBS, manufactured by JERED LLC under drawing 20728002. The test will be performed in specific locations including Mooring Station No.5, Passage area, and Stern Gate Operator Gear Room, following specific technical references and test procedures.
The project is part of a naval maintenance effort by the Department of the Navy Naval Supply Systems Command, with the load test scheduled for November 1, 2025 to December 31, 2025 at the Sasebo Ship Repair Facility in Japan. Key requirements include providing a floating crane with sufficient load capacity, installing new test label plates upon successful completion, and addressing surface preservation. Previous repair work on the slew bearing, shaft, pinion assembly, planetary gear box, motor, and electric brake has been completed under separate job specifications, setting the stage for this final load testing phase.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 38KF258203 A01 6 CAPSTAN LOAD TEST SOW for VENDOR.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. SCOPE:
1.1 Title: No.One Warping Capstan for Mooring Station No.5; load test
1.2 Location of Work:
1.2.1 Mooring Station No.5 (2-188-3-Q)
1.2.2 Passage (3-188-5-L)
1.2.3 Stern Gate Operator Gear Room No. One (2-194-1-Q)
1.3 Identification:
1.3.1 Quantity (One AY), No.One Warping Capstan Assembly and controller for Mooring Station No.5 located in 1.2.1 through 1.2.3
MFR - JERED LLC
MFR DWG - 20728002
Static Load - 280,000 LBS
APL - 53A030000
2. REFERENCES:
2.1 Standard Items (FY26)
2.2 S9582-BK-MMC-010 Rev 3, Warping Capstan, 30-Inch, Model 20728001 and 21205001
2.3 582-7317959 Rev F, Mooring and Towing Details
2.4 804-1843362 Rev B, Bitts for Synthetic Rope
2.5 Test Procedure (TP) File No.58211-4-100_25192, #1 Warping Capstan (Mooring Station #5)- Load Test
3. REQUIREMENTS:
(V)(G) "LOAD TEST"
3.1 Accomplish the requirements of 2.5 (TP) for load test and inspection of No.One warping capstan assembly listed in 1.3.1, using 2.2 through 2.4 for guidance. Ship’s Force must operate each equipment. –S246
3.1.1 Provide floating crane which has load capacity specified in 2.5 for load test of warping capstan assembly.
3.1.2 Install each new test label plate upon a satisfactory completion of test.
3.1.3 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.
4. NOTES:
4.1 Initial condition – Mooring station #5; warping capstan #1 repairs were executed in 4C1 under ICN 38KF158203. Testing was not completed.
4.2 Regarding work for repair of slew bearing assembly, shouldered shaft, slew pinion assembly, and planetary gear box of warping capstan assembly listed in 1.3.1 have been completed by another job specification, 3818D58201-H01.
4.3 Regarding work for motor repair and electric brake replacement of No.One warping capstan assembly listed in 1.3.1 have been completed by another job specification, 38KF158203-A01.
5. GOVERNMENT FURNISHED MATERIAL(GFM):
5.1 None.
ENCLOSURE (A) – 1/1
PRESERVATION AREA LISTED IN 1.3.1.2
File details come from the government source that posted it. Updated .