fire door book 2022 .xlsx

XLSX spreadsheet 83 KB Posted Feb 15, 2023

Attached to: H399--Annual Fire Door Inspection
Solicitation number: 36C26323Q0278
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 23

View the file

Other files

File	Type	Posted
Q and A.docx	DOCX document	Feb 15, 2023
Life Safety Drawings 2022.pdf	PDF	Feb 15, 2023
36C26323Q0278 0001_1.docx	DOCX document	Feb 15, 2023
36C26323Q0278 0001.pdf	PDF	Feb 15, 2023
DRAWING.pdf	PDF	Feb 15, 2023
WD15-5771 GRAND ISLAND.pdf	PDF	Feb 13, 2023
S02.36C26323Q0278.pdf	PDF	Feb 13, 2023
WD15-5005 OMAHA.pdf	PDF	Feb 13, 2023
36C26323Q0278_1.docx	DOCX document	Feb 13, 2023

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Basement

Room number

B728

B723

B721

B836

B815

700b

B622

B989

B579

B577

elect shop

B530

B502

B501

B17

B064

B020

B094

B051

B024

B080

Item

Yes, No or N/A

Labels are clearly visible and legible on doors and frames.

No open holes or breaks exist in surfaces of either the door or frame.

Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.

The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.

No parts are missing or broken.

Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

&16 Basement

1st Floor

			1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	11	1	1				1	1	1	1	1	1	37
											1st Floor
		Room number	1269	C205A	1366	1406	1220	C220	C210	1206A	1202	B17	1105	1164	C260b	C265A	1051	1025	1025a	1026	1012	C235A	C104			Room number	1416	1415	1701	1777	1650	c2358
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A		Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.																							1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.																							2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.																							3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.																							4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.																							5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7																							6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm). Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

Paragraph 6.3.1.7: The clearances between the top and vertical edges of the door and the frame, and the meeting edges of doors swinging in pairs, shall be 1/8 in. ± 1/16 in. (3.18 mm ± 1.59 mm) for steel doors and shall not exceed 1/8 in. (3.18 mm) for wood doors. Paragraph 6.3.1.7: The clearances between the top and vertical edges of the door and the frame, and the meeting edges of doors swinging in pairs, shall be 1/8 in. ± 1/16 in. (3.18 mm ± 1.59 mm) for steel doors and shall not exceed 1/8 in. (3.18 mm) for wood doors.

2nd Floor

			1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	21
										2nd Floor
		Room number	2417	2446	2447	2543b	2543	2542	2534	2349	2270	2340	2312	2283	2284	2111	2051	2041	2049	2018	2805	C224	2000
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

3rd Floor

			1	1	1	1	1	1	1	1	8
										3rd Floor
		Room number	3351	3324	3000	3267d	3031	3062b	3770a	3754a
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

4th floor

			1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1		1	1	1	1	1	1	1	1	1	1	30
										4th Floor
		Room number	4329	4324	4331	4374	4374b	4340	4339	4267	door by 4267	4281	4215	4374G	4370	4361	4209	4001	4374F	door by 4374F	4819	4003		4816	4015	4028	4805	4783	4775	4042	4044	4061	4007
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Item	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.																						Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.																						No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.																						Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.																						The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.																						No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7																						Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm). Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

5th floor

			1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	18
										5th Floor
		Room number	5705C	5711	5607	5500	5511	5501	5502	5429	5419	5420	5001	5002	5003	5018	5203	5109	5037	5603
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

6th Floor

			1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	18
										6th Floor
		Room number	6705C	6712	6600	6502	6508	6419	doors by 6519	6001	doors by 6002	6109	6018	6203	6307
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

7th Floor

			1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	15
										7th Floor
		Room number	7705c	7614	7603	7509	7508	7511	7417	7414	7001	7002	7003a	7018	7109	7203	7307
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

8th Floor

			1	1	1	1	1	1	1	1	1	9
										8th Floor
		Room number	8705c	8711	8511	door by 8405	8001	8414	8111	8511	8311
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

9th Floor

			1	1	1	1	1	1	1	1	8
										9th Floor
		Room number	9750d	9702	9001	9401	9414	9111	9311	9511
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

10th Floor

			1	1	1	1	1	1	1	1	1	1	10
										10th Floor
		Room number	10707	10705	10700A	door by 10609	10501	10513	door by 10418	10001	10414	10110
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

11th Floor

			1	1	1	1	1	1	6
										11th Floor
		Room number	11705C	11711	11001	11003A	11110	11414A
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

12th Floor

			1	1	1	1	1	1	6
										12th Floor
		Room number	12705	12705a	12004	12003B	12002	12017
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

13th and 14th floor

			1	1	1	1	1	1	1	1	1	1	10
										13th and 14th Floor
		Room number	13705	13705a	13000	13000a	13000B			14000a	14001	14000a
	Item		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A	Yes, No or N/A		Yes, No or N/A	Yes, No or N/A	Yes, No or N/A
1	Labels are clearly visible and legible on doors and frames.
2	No open holes or breaks exist in surfaces of either the door or frame.
3	Glazing, vision light frames, and glazing beads are intact and securely fastened in place, if so equipped.
4	The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signs of damage.
5	No parts are missing or broken.
6	Door clearances do not exceed clearances listed in 4.8.4 and 6.3.1.7

Paragraph 4.8.4: The clearance under the bottom of a door shall be a maximum of 3/4 in. (19 mm).

	6.3.1.7.2 Clearances shall be measured from the pull face of the door(s).
7	The self-closing devices is operational; that is, the active door completely closes when operated from the full open position.
8	If a coordinator is installed, the inactive leaf closes before the active leaf.
9	Latching hardware operates and secures the door when is is in the closed position.
10	Auxiliary hardware items that interfere or prohibit operation not installed on the door or frame.
11	No field modifications to the door assembly have been performed that void the label.
12	Meeting edge protection, gasketing and edge seal, where required, are inspected to verify their presence and integrity.
13	Signage affixed to a door meet the requirements listed below:
	Paragraph 4.1.4
	- Signs are informational
	- All attached signs shall not exceed 5 percent of the area of the face of the fire door.
	- Signs shall be attached to the fire door by use of an adhesive
	- Mechanical attachment such as screws or nails shall not be permitted.
	- Signs shall not be installed on glazing material of fire doors
	- Signs shall not be installed on the surface of fire doors so as to impair or otherwise interfere with the proper operation of fire door

File details come from the government source that posted it. Updated Feb 15, 2023.