36C25622R0092 - 32 31 53 - Permieter Security Fences and Gates_Updated.pdf

Impasse II Specification Ameristar Fence Products Rev. 10/10/2012

AMERISTAR FENCE PRODUCTS®

IMPASSE II®- High Security Steel Fence System – Ornamental Pale

Construction Specification - SECTION 32 31 19

PART 1 - GENERAL

1.01 WORK INCLUDED

The contractor shall provide all labor, materials and appurtenances necessary for installation of the steel corrugated pale security fence system defined herein at (specify project site).

1.02 RELATED WORK

Section ___ ___ - Earthwork Section ___ ___ - Concrete

1.03 SYSTEM DESCRIPTION

The manufacturer shall supply a total steel ornamental pale high security fence system of the Ameristar® Impasse II® Gauntlet™ design. The system shall include all components (i.e., pales, rails, posts, gates and hardware) required.

1.04 QUALITY ASSURANCE

The contractor shall provide laborers and supervisors who are thoroughly familiar with the type of construction involved and materials and techniques specified.

1.05 REFERENCES

ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy Coated (Galvannealed) by the Hot-Dip Process.

ASTM B117 - Practice for Operating Salt-Spray (Fog) Apparatus.

ASTM D523 - Test Method for Specular Gloss.

ASTM D714 - Test Method for Evaluating Degree of Blistering in Paint.

ASTM D822 - Practice for Conducting Tests on Paint and Related Coatings and Materials using Filtered Open-Flame Carbon-Arc

Light and Water Exposure Apparatus.

ASTM D1654 - Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.

ASTM D2244 - Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates.

ASTM D2794 - Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact).

ASTM D3359 - Test Method for Measuring Adhesion by Tape Test.

ASTM F2408 – Ornamental Fences Employing Galvanized Steel Tubular Pickets.

1.06 SUBMITTAL

The manufacturer's submittal package shall be provided prior to installation.

1.07 PRODUCT HANDLING AND STORAGE

Upon receipt at the job site, all materials shall be checked to ensure that no damage occurred during shipping or handling. Materials shall be stored in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism and theft.

1.08 PRODUCT WARRANTY

A. All structural fence components (i.e. rails, pickets, and posts) shall be warranted within specified limitations, by the manufacturer for a period of 15 years from date of original purchase. Warranty shall cover any defects in material finish, including cracking, peeling, chipping, blistering or corroding.

B. Reimbursement for labor necessary to restore or replace components that have been found to be defective under the terms of manufactures warranty shall be guaranteed for five (5) years from date of original purchase.

PART 2 - MATERIALS

2.01 MANUFACTURER

A. The steel ornamental pale high security fence system shall conform to Ameristar Impasse II Gauntlet 3-Rail. style manufactured by Ameristar Fence Products, Inc., in Tulsa, Oklahoma. Please contact Brad Chandler at 888.333.3422 for additional information.

2.02 MATERIAL

A. Steel material for fence framework (i.e., corrugated pales, rails and posts), when galvanized prior to forming, shall conform to the requirements of ASTM A924/A924M, with a minimum yield strength of 45,000 psi (310 MPa). The steel shall be hot-dip galvanized to meet the requirements of ASTM A653/A653M with a minimum zinc coating weight of 0.90 oz/ft2 (276 g/m2), Coating Designation G-90.

B. Material for corrugated pales shall be a nominal 2.75” x .75” x 14 Ga. The cross-sectional shape of the rails shall conform to the manufacturer's Impasse II® rail design a nominal 2” x 2” x 11 Ga. Pre-drilled holes in the Impasse II® rail shall be spaced 6” on center, providing a pale airspace of no greater than 3.25”. Tamperproof fasteners shall be used to fasten each pale to rail at every intersection. Posts shall conform to the manufacturer's Impasse II® I-Beam design with a nominal 3” x 2.75” x 12 Ga. for fence panel heights up to & including 8’ height and/or Impasse II I-Beam design with a nominal 4” x 2.75” x 11 Ga. for fence heights greater than 8’ up to 10’ panel height. Fence posts and gate posts shall meet the minimum size requirements of Table 1.

C. If applicable - Material for steel Impasse II privacy screening shall be 18ga. preformed slats, providing complete screening coverage between pales and at pale to post connections. Impasse II privacy screening shall provide screening from top rail to bottom rail, and be capable of traversing terrain without impeding the raking capabilities of the fencing panel.

2.03 FABRICATION

A. Pales, rails and posts shall be pre-cut to specified lengths. Impasse II rails shall be pre-punched to accept tamperproof security fasteners. Post flange shall be pre-punched to accept rail to post attachment. Post web shall be punched providing a clear opening for interior of rails to align throughout the entire system for affixing conduit, video cabling, IDS wiring, and other components for a complete systems integration. Impasse II rails shall be attached to post flange providing a bracket-less design at each intermediate post.

B. The manufactured galvanized framework shall be subjected to the PermaCoat® thermal stratification coating process (high-temperature, in-line, multi-stage, multi-layer) including, as a minimum, a six-stage pretreatment/wash (with zinc phosphate), an electrostatic spray application of an epoxy base, and a separate electrostatic spray application of a polyester finish. The base coat shall be a thermosetting epoxy powder coating (gray in color) with a minimum thickness of 2 mils (0.0508mm). The topcoat shall be a “no-mar” TGIC polyester powder coat finish with a minimum thickness of 2 mils (0.0508mm). The color shall be Black. The stratification-coated framework shall be capable of meeting the performance requirements for each quality characteristic shown in Table 2.

C. Completed panels shall be capable of supporting a 400 lb. load (applied at midspan) without permanent deformation. Panels shall be biasable to a 30˚ change in grade.

D. Swing gates shall be fabricated using 2” sq. x 11ga rail, 2” sq. x 11ga. gate ends, and 2.75” x .75” x 0.075 pales. Gates that exceed 6’ in width will have a 2” sq. x 11ga. intermediate upright. All rail and upright intersections shall be joined by welding. All pale and rail intersections shall also be joined by welding.

E. Sliding cantilever gates shall be TransPort IS design matching style, height, and color of fence system. The dual enclosed track slide gate shall be an aluminum component design using tracks, uprights, pales, hardware, fittings, and fasteners. Gate installation shall comply with latest ASTM F2200 standards for automated gates, regardless if the gate is of manual operation.

PART 3 - EXECUTION

3.01 PREPARATION

All new installation shall be laid out by the contractor in accordance with the construction plans.

3.02 FENCE INSTALLATION

Fence post shall be spaced according to Table 3, plus or minus ¼”. For installations that must be raked to follow sloping grades, the post spacing dimension must be measured along the grade. Fence panels shall be attached to the line and end posts with fasteners supplied by the manufacturer. Attachment to corner post shall be made using brackets and fasteners supplied by the manufacturer (See Figure 1).

Posts shall be set in concrete footers having a minimum depth of 36” (Note: In some cases, local restrictions of freezing weather conditions may require a greater depth). The “Earthwork” and “Concrete” sections of this specification shall govern material requirements for the concrete footer. Posts setting by other methods such as plated posts or grouted core-drilled footers are permissible only if shown by engineering analysis to be sufficient in strength for the intended application.

3.03 FENCE INSTALLATION MAINTENANCE

When cutting/drilling rails or posts adhere to the following steps to seal the exposed steel surfaces; 1) Remove all metal shavings from cut area. 2) Apply zinc-rich primer to thoroughly cover cut edge and/or drilled hole; let dry. 3) Apply 2 coats of custom finish paint matching fence color. Failure to seal exposed surfaces per steps 1-3 above will negate warranty. Ameristar spray cans or paint pens shall be used to prime and finish exposed surfaces; it is recommended that paint pens be used to prevent overspray. Use of non- Ameristar parts or components will negate the manufactures’ warranty.

3.04 GATE INSTALLATION

Gate posts shall be spaced according to the manufacturers’ gate drawings, dependent on standard out-to-out gate leaf dimensions and gate hardware selected. Type and quantity of gate hinges shall be based on the application; weight, height, and number of gate cycles. The manufacturers’ gate drawings shall identify the necessary gate hardware required for the application. Gate hardware shall be provided by the manufacture of the gate and shall be installed per manufacturer’s recommendations.

3.05 CLEANING

The contractor shall clean the jobsite of excess materials; post-hole excavations shall be scattered uniformly away from posts.

Table 1 – Minimum Sizes for Impasse II® Posts Fence Posts (Nominal) Panel Height 3” x 2.75” x 12 Ga. I-Beam Up to & Including 8’ Height 4” x 2.75” x 11 Ga. I-Beam Over 8’ Height up to & including 10’ Height

Gate Leaf Gate Height

Up to & Including 6’ Over 6’ Up to & Including 8’

Over 8’ Up to & Including 10’

Over 12’

Up to 4’ 3” x 12Ga. 3” x 12 Ga. 4” x 11 Ga. 4” x 11 Ga.

4’1” to 6’ 3” x 12Ga. 3” x 12 Ga. 4” x 11 Ga. 4” x 11 Ga.

6’1” to 8’ 4” x 11 Ga. 6” x 3/16” 6” x 3/16” 6” x 3/16” 8’1” to 10’ 4” x 11 Ga. 6” x 3/16” 6” x 3/16” 6” x 3/16” 10’1” to 12’ 6” x 3/16” 6” x 3/16” 6” x 3/16” 8” x 1/4" 12’1” to 16’ 6” x 3/16” 6” x 3/16” 8” x 1/4” 8” x 1/4"

Table 2 – Coating Performance Requirements Quality Characteristics ASTM Test Method Performance Requirements Adhesion D3359 – Method B Adhesion (Retention of Coating) over 90% of test area (Tape and knife test).

Corrosion Resistance B117, D714 & D1654 Corrosion Resistance over 3,500 hours (Scribed per D1654;

failure mode is accumulation of 1/8” coating loss from scribe or medium #8 blisters).

Impact Resistance D2794 Impact Resistance over 60 inch lb. (Forward impact using 0.625” ball).

Weathering Resistance D822 D2244, D523 (60˚ Method) Weathering Resistance over 1,000 hours (Failure mode is 60% loss of gloss or color variance of more than 3 delta-E color units).

Table 3 – Impasse II® Post Spacing Span 8’ Nominal (95” Rail) Line & End Posts Post Size 3” x 2.75” x 12 Ga. I-Beam 4” x 2.75” x 11 Ga. I-Beam Post Settings ± ¼” O.C. 96” 96” *For Corner Posts see Figure 1

Figure 1

REVISION HISTORY

REV ECN AUTHOR DATE DESCRIPTION

A KMc 12/19/2014 Initial Release DATE:

DRAWING NO:

REV:

SHEET:

Unless Noted Otherwise

.x

.xx

.xxx

.xxxx Angular

Decimal Decimal Decimal Decimal

.040 .030 .020 .010 0.5

DO NOT SCALE

OFF DRAWING

R

1555 N. Mingo Tulsa, OK 74116 1-888-333-3422 www.ameristarfence.com

DRN BY:

TITLE:

12/19/2014

A

3GX30948N

KMc

IMPASSE II STEEL PANEL

# DESCRIPTION

4" I-BEAM POST

3 234" PALE - 3GX3094

IMPASSE II RAIL - 3XR95

AMERISTAR R

1555 N. Mingo Tulsa, OK 74116 1-888-333-3422 www.ameristarfence.com

TITLE:

DATE:

DRN BY: CHK BY:

DRAWING NO:

SCALE:

REV:

SHEET:08/09/12

JAS

Do Not Scale

IMPASSE II 4" I-BEAM 120"L - FOR 8'T FENCE

3PX3120-4

1/1 a

This drawing is the proprietary property of AMERISTAR, Tulsa, OK and must not be duplicated or used in whole or in part for the making of drawings, prints or parts to the detriment of, or harm to, the owner.

In accepting this drawing, the recipient agrees to keep the information contained confidential.

PROPRIETARY

INFORMATION

ES

AMERISTARFENCE.COM | 800-321-8724

FENCE PRODUCTS

HIGH SECURITY STEEL PALISADE FENCING

2 3Learn more online at ameristarfence.com or by calling 800.321.8724 IMPASSE II ® | High Security Steel Palisade Fence

AESTHETIC APPEAL.

UNPARALLELED PROTECTION.

Traditional security fences of chain link or wire mesh are no longer enough to meet todays increased security demands. Ameristar’s Impasse II security fence offers the resistive strength of heavy-duty steel pales secured vertically to a framework of specially formed rails and I-beam posts. The stylish design of the Impasse II, combined with its strength and security, provides a successful first line of defense.

Primary applications for Impasse II ornamental steel fence systems include:

Military Sites Government Facilities Petroleum & Chemical Facilities Power Plants & Substations Airports Data Centers Ports of Entry Water Treatment & Storage j j j j j j j j

4 5Learn more online at ameristarfence.com or by calling 800.321.8724 IMPASSE II ® | High Security Steel Palisade Fence

ANTI-SCALE OPTION

The Impasse Trident pale rises above the topmost rail and terminates with a menacing triple-pointed splayed spear tip. The intimidating look of the Trident corrugated pale is a visual deterrent to any who would dare to intrude.

3-RAIL PANELS | 6', 7', 8', 9' & 10' HEIGHTS

2-RAIL PANELS | 6', 7' & 8' HEIGHTS

Gauntlet is designed with high-tensile steel corrugated pales that rise above the topmost rail with an outward curve and terminate with a triple-pointed splayed spear tip. The outward curved pales discourage attempts to gain access by would be intruders.

3-RAIL PANELS | 6', 7', 8', 9' & 10' HEIGHTS

2-RAIL PANELS | 6', 7' & 8' HEIGHTS

The blunt, slightly rounded tip of the Stronghold offers strength when necessary, while providing safety and security to the general public. The Stronghold features the same structural configurations of its high-security counterparts.

3-RAIL PANELS | 6', 7', 8', 9' & 10' HEIGHTS

2-RAIL PANELS | 6', 7' & 8' HEIGHTS

j j j j j j

8¾"

TRIDENT™ GAUNTLET™

STRONGHOLD™

HIGH SECURITY STEEL PALISADE FENCE 2.75"w x 14ga PALES | 2" x 2" x 11ga RAILS | 3" x 2.75" x 12ga & 4" x 2.75" x 11ga I-BEAM POSTS

The Impasse II Anti-Scale fence system has decreased pale spacing, which helps deter the assailant from climbing, and increases the delay time when trying to cut or pry through the fence.

COLOR OPTIONS

BLACK SANDBRONZE WHITE

Custom colors also available

6 7Learn more online at ameristarfence.com or by calling 800.321.8724 IMPASSE II ® | High Security Steel Palisade Fence

Impasse II is protected by the unique PermaCoat process. Our PRE-GALVANIZED STEEL

BASE MATERIAL is subjected to an 11-STAGE PROCESS to cleanse & prepare the steel for a DUAL TOP-COAT FINISH. PermaCoat’s corrosion resistant abilities far surpass those of painted surfaces and have a “no-mar” polyester powder top coat. This dual coating not only provides RESISTANCE FROM WEATHERING but also reduces scratch & burnishing marks typically encountered during shipping.

ONCE COMPLETED, THESE 7-STAGES WILL HAVE

REMOVED EVERYTHING FROM THE SURFACE OF

THE STEEL THAT MIGHT INHIBIT THE FINISH FROM

PROPERLY ADHERING DURING THE NEXT 4-STAGES

OF THE COATING PROCESS.

EPOXY POWDER COAT

Epoxy powder is electrostatically applied

EPOXY GEL OVEN

Powder is gelled & cured to finish coat

FINISH CURING OVEN

Seals finish for years of maintenance free use

POLYESTER POWDER

TGIC powder is electro-statically applied

CO

RR

OS

IO

NT

ES

TI

NG

ZINC PHOSPHATE

Corrosion resistant layer that assists in bonding powder coating

CLEAR WATER RINSE

A bit of clean H2O to prep for the next phase

ALKALINE WASH

Cleans metal for proper adhesion of zinc phosphate

1 2

8 9 10 11

3 4 5 6 7

FIXIDINE RINSE

Rinses excess alkaline prior to zinc phosphate application

DRYING OVEN

Eliminates all moisture prior to double coating

CLEAR WATER RINSE

Final wash in H2O to remove any excess debris or particles

NON-CHROMATE SEAL

Barrier to prevent moisture from reaching base metal

DO

UB

LE

CO

AT

IN

G

PR

E-

TR

EA

TM

EN

T

3,500

HOURS

PERMACOAT PROCESS

Zinc Phosphate +

Epoxy Powder Coat + Polyester Powder Coat

1,500

HOURS

SINGLE COAT PROCESS

Zinc Phosphate +

Polyester Powder Coat

HOURS

SINGLE COAT PROCESS

Iron Phosphate +

Polyester Powder Coat

HOURS

PRIMED & PAINTED STEEL

HOURS

PAINTED STEEL

Corrosion occurs more easily without the proper preparation & protection, which is why Ameristar has put our fence products to the test based on ASTM B117 standards. The results speak for themselves.

PERMACOAT™

8 9Learn more online at ameristarfence.com or by calling 800.321.8724 IMPASSE II ® | High Security Steel Palisade Fence

Impasse II Gauntlet shown

FASTENER

Security fastener prevents tampering or removal by typical tools

POST CAP

Cast aluminum cap adds beauty and provides closure

I-BEAM POST

Specifically formed I-beam; pre-punched for rail attachment with pass through integrated design features

HIGH STRENGTH RAIL

Specifically formed for strength through architectural shape; lower lip contoured to conceal & carry security elements such as anti-ram cabling, IDS, etc.

STEEL PALES

Specifically formed high strength corrugated architectural shape resists prying or bending; bolt holes are recessed to prevent bolt head from chiseling

Impasse II panels and posts are manufactured using HIGH-TENSILE PRE-GALVANIZED G-90

STEEL. Each component has been ROLL-FORMED into a unique profile that yields significant strength properties. Impasse II’s distinct design enables the fence to TRAVERSE AGGRESSIVE CHANGES

IN GRADE IN ORDER TO MAINTAIN SECURITY along any perimeter. Each connection point of the

Impasse II system is secured with TAMPER-PROOF FASTENERS providing the HIGHEST LEVEL OF

SECURITY & VERSATILITY.

PERMACOAT™

PRIVACY SCREENING OPTION

A security fence should cover multiple aspects of perimeter security, which is why Ameristar created the steel privacy screening option for its Impasse high security fence system. Secured by each adjacent pale, the overlapping design achieves the maximum level of opacity for visual screening.

Ameristar products are manufactured domestically in Tulsa, Oklahoma

Manufactured from up to 96% recycled domestic steel, Impasse II products earn project LEED points

Certified by the US Department of Homeland Security as a method of risk management against acts of terrorism

Ameristar’s Impasse II is backed by over 30 years of excellence in the fencing industry

IMPASSABLE DESIGN

When installing these security elements use Impasse II as a platform:

Communication & Video Cables Intrusion Detection / Fiber Optic Cables Access Control Wiring Conduits Anti-Ram Cabling (Stalwart IS) j j j j j

DESIGN INTEGRATION

The Impasse II framework is a raceway for wiring, conduits & security cabling required around the perimeter of a project. This integrated design eliminates the need for costly trenching & boring becoming a value added solution for perimeter security upgrades.

(inside of rail shown above / view from protected side)

RAKEABLE VS STAIR-STEP

Biasability at a minimum of 25% that requires no additional assembly. This unique feature eliminates unsightly stair-stepping panels.

Fully rakeable panels Stair-stepping panels

10 11Learn more online at ameristarfence.com or by calling 800.321.8724 IMPASSE II ® | High Security Steel Palisade Fence

ARCHITECTURAL SUPPORT

SOLUTION SPECIALISTS

SLIDE GATES

SWING GATES

Egress & ingress requirements are unique to each application.

Managing traffic flow & usage demands are of the utmost importance, which is why Impasse II is manufactured in a variety of gate types built to balance function, security & beauty.

Ameristar Transport™ & Passport™ sliding gates perfectly match the perimeter fence system to create a seamless & stunning design while exuding a commanding presence of security built to unite perimeter and entry.

Stalwart IS unites the strongest security fence available with the most widely used anti-ram perimeter barrier. The appearance of Stalwart IS is a great visual deterrent that delivers strength and fortitude for keeping any assailant from easily breaching the perimeter.

Stalwart IS offers multiple anti-ram ratings engineered & tested to meet ASTM F2656 standards. Each installation can be designed with the most appropriate standoff distance from the asset.

Ameristar’s Project Solution Specialists are experienced in every facet of perimeter security design. Our goal is to assist the architectural community in finding the best perimeter & entry solutions for their projects. Ameristar’s extensive library of project photos, CAD drawings, architectural specifications & project budget quotes are just a few of the services our team offers to complete your project design.

ANTI-RAM BARRIER + SECURITY FENCE

AMERISTARFENCE.COM | 800-321-8724

FENCE PRODUCTS

KNOWLEDGE & EXPERIENCE

Ameristar was chartered 30 years ago in response to the demand by consumers & specifiers for specialty fence products. Ameristar offers an aesthetically pleasing product that is both high in quality & affordability. This has been achieved by maximizing high-volume productivity, increasing product design strength, and promoting simplistic installation.

PROVEN CAPABILITY

Ameristar’s integrated in-house process & extensive raw material inventory results in much improved productivity and availability compared to the competition. By having a vast finished goods inventory, Ameristar is capable of delivering finished products faster than competitors who sublet the majority of their operations.

INDUSTRY LEADERSHIP

Over the years Ameristar has continually raised the bar across the board in the manufacturing of high quality, innovative fencing products. Our demonstrated commitment to upholding higher values translates into superior products that go far beyond merely meeting minimum industry standards.

WHY CHOOSE AMERISTAR

Ameristar's world headquarters, manufacturing & coil processing facilities in Tulsa, Oklahoma, USA.

LEGEND

★ Ameristar Headquarters

● Sales & Service Centers

#9718 | REVISED 07/2014

1555 N. MINGO RD., TULSA, OK 74116

WWW.AMERISTARFENCE.COM

IMPASSE II® | WARRANTY

HIGH SECURITY ORNAMENTAL STEEL FENCE

The Impasse II® Steel Security Fence System by Ameristar® is manufactured from the highest quality materials by skilled craftsmen to meet the highest standards of workmanship in the industry. Galvanized steel framework shall be subject to a six stage pretreatment/wash (with zinc phosphate) followed by an electrostatic spray application of the PermaCoat® Color System, a two coat powder system. The base coat is a thermosetting provides the protection necessary to withstand adverse environmental conditions.

The powder coated surface on all framework (i.e., pales, rails and posts) by Ameristar is guaranteed under

(15) years from the original purchase date. Normal and proper usage does not include physical damage, abrasion or exposure to salty environments to the protective coating.

Impasse II Steel Security Fence System framework is also guaranteed for the same period of time against defects in workmanship or materials.

Should any Impasse II® fence framework manufactured by Ameristar Fence Products fail in accordance with any of the above conditions, Ameristar® Fence Products warrants to the original purchaser their redemption through replacement, renewal or issuance of a pro-rated credit. The decision as to which method of redemption is allowed is solely at the discretion of Ameristar. If pro-rated allowance is the chosen alternative, the amount will be based on the total number of years under warranty from date of purchase to date of claim, based on the original cost of framing materials found to be defective. Notice of failure under the conditions of this warranty shall be sent to Ameristar Fence Products or its authorized representative, in writing, together with

Impasse II components immediately seal the exposed surfaces by 1) Removing all metal shavings from cut area 2) Apply zinc-rich primer to thoroughly cover cut edge and drilled hole; let dry 3) Apply 2 coats of ����+�0��$�&����������� warranty. If contractor uses non Ameristar parts/components this will negate the warranty. Should the fence be improperly installed, Ameristar Fence Products shall not be responsible for guaranteed performance or appearance of the material. Neither does this guarantee apply when failure or damage is due to improper use or application, abuse or misuse, salty environments, vandalism or acts of God. Ameristar Fence Products reserves the right to inspect the material to determine validity of the claim.

Upon validation of the claim by Ameristar Fence Products or its authorized representative, redemption by replacement, renewal or issuance of a pro-rated credit shall be made by Ameristar Fence Products.

Reimbursement for labor necessary to restore and/or replace components that have been found defective

�� ��%��&���4����� ����6��

the labor to repair or replace the components that are deemed to be defective under the terms of this warranty.

The above constitutes the complete warranty by the manufacturer. No other agreement, written or implied, is valid. Ameristar Fence Products does not authorize any other person or agent to make any other express warranties. Ameristar Fence Products neither assumes nor authorizes any other person or agent to assume any other liability in connection with the Impasse II Steel Security Fence System. Some jurisdictions do not allow limitations on how long an implied warranty lasts, nor do they allow an exclusion or limitation of incidental or consequential damages; therefore, the limitations and exclusions noted herein may not apply.

Unless Noted Otherwise

.x

.xx

.xxx

.xxxx Angular

Decimal Decimal Decimal Decimal

.040 .030 .020 .010 0.5

DO NOT SCALE

OFF DRAWING

R

1555 N. Mingo Tulsa, OK 74116 1-888-333-3422 www.ameristarfence.com

TITLE:

DATE:

DRN BY:

DRAWING NO:

REV:

SHEET:

3TGX09630S

06/03/13

TLS A

TRANSPORT IS GAUNTLET ALUM. CANT. GATEREVISION HISTORY

REVISION HISTORY

Unless Noted Otherwise

.x

.xx

.xxx

.xxxx Angular

Decimal Decimal Decimal Decimal

.040 .030 .020 .010 0.5

DO NOT SCALE

OFF DRAWING

R

1555 N. Mingo Tulsa, OK 74116 1-888-333-3422 www.ameristarfence.com

TITLE:

DATE:

DRN BY:

DRAWING NO:

REV:

SHEET:

3TGX09630S

06/03/13

TLS A

TRANSPORT IS GAUNTLET ALUM. CANT. GATE