36C25218B0192-007.docx

REPLACEMENT DOOR LOCATIONS

BUILDING 225 GENERATOR ROOM

REMOVE EXISTING DOOR AND FRAME FROM OPENING. FURNISH AND INSTALL

NEW 3'0" X 7'0" DOOR AND FRAME COMPLETE WITH EXIT DEVICE AND OUTSIDE LEVER TRIM, DOOR CLOSER, SURFACE ROTON HINGE, SADDLE THRESHOLD, BRUSH SWEEP AND PERIMETER WEATHERSTRIP

BUILDING 1 - B103 EXTERIOR EAST SIDE

- REMOVE EXISTING 3'6" X 7'0" BURIED FRAME AND REMOVE EXISTING DOOR FROM OPENING. FURNISH AND

INSTALL NEW FRAME AND DOOR, HANG ON ROTON HINGE. OTHER NEW HARDWARE INCLUDES:

1 - 10" X 10" VISIBLE WIRE GLASS

1 - RIM EXIT DEVICE WITH OUTSIDE LEVER TRIM

1 - HD DOOR CLOSER

1 - RIM ELECTRIC STRIKE

1 - SADDLE THRESHOLD

1 - BRUSH SWEEP

1 - PERIMETER WEATHERSTRIP

-UPS INNER OPENING

- REMOVE EXISTING 3'6" X 7'0" LH FILLED METAL FRAME AND DOOR FROM BLOCK

OPENING. FURNISH AND INSTALL NEW 3'6" X 7'0" LHR MASONRY FRAME WITH METAL DOOR AND 5 X 20 WIRE GLASS WINDOW. INSTALL NEW SWING CLEAR ROTON HINGE, MORTISE LOCK WITH DEADBOLT, HOLD OPEN

CLOSER AND BRUSH SWEEP.

BUILDING 221 RM.#D110

- REMOVE EXISTING 4'0" X 7'0" RH WOOD DOOR AND FURNISH AND INSTALL NEW PREFINISHED (CLEAR) AND HANG ON FULL MORTISE ROTON HINGE. INSTALL 46 X 36 ARMOUR PLATES ON BOTH SIDES AND 36" TALL EDGE GUARD ON LATCH EDGE. REINSTALL EXISTING DOOR#'S, DOOR KNOCKER AND FALCON MORTISE

PASSAGE SET.

A100 BUILDING 221 CLEAN LINEN - PAIRS OF DOORS

3 SETS OF NEW HOLLOW METAL DOORS WITH 3/4 HR RATING AND THE

FOLLOWING LISTED BELOW:

- REUSE EXISTING SIMPLEX COMBONATION LOCK ON 1 PAIR AND FALCON MORTISE LOCKS ON OTHER 2

PAIRS.

- REUSE EXISTING LCN 1460 CLOSERS BUT MOUNT PARALLEL ARM.

QTY. 3 - 5 X 20 WIRE GLASS KITS (ACTIVE DOORS ONLY)

QTY. 3 - LCN 1460 CLOSERS FOR INACTIVE DOORS

QTY. 6 - FULL MORTISE ROTON HINGES

QTY. 3 - PA BRACKET FOR 1460 CLOSERS

-BUILDING 16 BASEMENT EXTERIOR

Furnish and install new 3'6" X 6'8" LHR metal frame fully grouted and anchored into concrete foundation and new metal door, w/10” x 10” window lite kit, hardware to include full mortise aluminum roton hinge, closer, exit device with exterior trim, SFIC rim cylinder, threshold, brush type sweep and perimeter weather stripping. Paint interior and exterior door and frame to match existing. VA will install original lock core upon completion of install

BUILDING 1 B113 EAST EXTERIOR

FURNISH AND INSTALL NEW 3'6" X 7'0" LHR METAL FRAME WITH NEW METAL DOOR AND 5" X 20" GLASS LITE.

NEW HARDWARE INCLUDES VON DUPRIN MORTISE EXIT DEVICE WITH OUTSIDE LEVER TRIM (REUSE MORTISE CYLINDER), 24VDC VON DUPRIN ELECTRIC STRIKE, LCN 4041 CLOSER, ROTON CONTINUOUS HINGE, SADDLE THRESHOLD, SWEEP AND PERIMETER WEATHERSTRIP.

FREEZER CORRIDOR C028 – PAIR

- REMOVE DOORS FROM MARKAR HALF MORTISE HINGES AND REHANG ON SWING CLEAR FULL SURFACE

ROTON HINGES. INSTALL 2 BRUSH SWEEPS AND BRUSH ASTRAGAL

-AUDITORIUM DOORS

- REMOVE EXISTING PAIR OF DOUBLE ACTING DOORS FROM WOOD FRAME OPENING. FURNISH AND INSTALL RHR 4'0" X 7'0" METAL FRAME OPENING WITH SIDE PANEL AND OVERHEAD PANEL. NEW DOOR WILL BE PSRO PREFINISH CLEAR WITH 5" X 20" WIRE GLASS. HANG DOOR ON HD FULL MORTISE ROTON HINGE, INSTALL 5" SADDLE THRESHOLD, VON DUPRIN 99 SERIES RIM EXIT DEVICE WITH KEYED LEVER TRIM (CORE BY VA) AND

LCN 4041 HOLD OPEN DOOR CLOSER.

BUILDING 16 1ST FLOOR INTERIOR STAIR

REMOVE WOOD DOOR AND INSTALL 3'0" X 7'0" METAL DOOR WITH 10 X 10 WIRE GLASS, SURFACE ROTON HINGE AND CLOSER. WE WILL REUSE VON DUPRIN 9975 MORTISE EXIT DEVICE AND OUTSIDE TRIM.

AUDITORIUM PAIR OF DOORS

REMOVE EXISTING FILLED METAL FRAME AND METAL DOORS. FURNISH AND INSTALL NEW METAL FRAME

AND PAIR OF 2'6" X 7'0" DOORS WITH THE FOLLOWING HARDWARE:

- VON DUPRIN EXIT DEVICES (EXIT ONLY)

- LCN 4041 CLOSERS

- ROTON CONTINUOUS HINGES

- PANIC THRESHOLD

- DOOR SWEEPS

- PERIMETER WEATHERSTRIP

- BRUSH ASTRAGALS

D129 MEN'S RM.

- REMOVE EXISTING WOOD DOOR AND FURNISH AND INSTALL NEW RH 3'0" X 82-1/4" NET

WOOD DOOR PAINT GRADE BIRCH. HANG NEW DOOR ON SURFACE ROTON HINGE. NEW PUSH PLATE ANDKICKPLATE. REUSE INSIDE PULL. SAVE SIGNAGE AND INSIDE INFO HOLDER AND GIVE TO COR.

D133 WOMEN'S RM.

- REMOVE EXISTING WOOD DOOR AND FURNISH AND INSTALL NEW LH 3'0" X 7'0" WOOD

DOOR PAINT GRADE BIRCH. HANG NEW DOOR ON SURFACE ROTON HINGE. NEW PUSH PLATE AND

KICKPLATE. REUSE INSIDE PULL. SAVE SIGNAGE AND INSIDE INFO HOLDER AND GIVE TO COR

BUILDING 17 WEST CORRIDOR TO OFFICE

REMOVE EXISTING WOOD DOOR AND REPLACE WITH NEW. 3'4" X 7'0" PSRO LHR 10 X 10 WIRE GLASS KIT,SURFACE ROTON HINGE, RIM EXIT DEVICE W/LEVER TRIM, DOOR CLOSER AND 10 X 34 KICKPLATE. KEY COREPROVIDED BY VA

BUILDING 17 WOMENS WASHROOM

- REHANG DOOR ON SURFACE ROTON HINGE AND INSTALL HINGE FILLERS.

BUILDING 17 EAST STAIR TO OFFICE

- REMOVE EXISTING 3'4" X 7'0" WOOD DOOR AND REPLACE WITH NEW 90 MIN PAINT GRADE BIRCH RHR.

HANG ON SURFACE ROTON HINGE, NEW EXIT DEVICE WITH PASSAGE LEVER TRIM, 10 X 10 WIRE GLASS KIT,T-STRIKE FILLER, 5" FRAME HINGE FILLERS, 1/4" SADDLE THRESHOLD, SWEEP AND REUSE LCN CLOSER.FURNISH AND INSTALL 42" BRUSH SWEEP FOR EXTERIOR EAST DOOR.

RM. 202 BUILDING 8

- FURNISH AND INSTALL NEW LH 3'6" X 7'0" FLUSH METAL DOOR. HANG ON HD FULL MORTISE ROTON HINGE,NEW STOREROOM LEVER AND S/C DEADBOLT (CORES PROVIDED BY VA).

RM. 216 BUILDING 8

FURNISH AND INSTALL RNB WOOD DOOR 2'8" X 78-5/8" NET RH PREFINISH CLEAR. HANG ON FULL MORTISE ROTON HINGE, NEW STOREROOM LEVER AND S/C DEADBOLT (CORES PROVIDED BY VA

BUILDING 1 C SECTION ROOF

SFDOOR SPECIAL ORDER STEEL DOOR

L18, 3'8" X 7'0", G CUTOUT ONLY, RH, NO HINGE PREP, 61L, CLOSER

REINF

SFFRAMESTOCK FRAME MADE FROM STOCK PIECES

F16, 3'8" X 7'0", 7-1/8" JD, RO= 48" X 86", RH, WELDED, P&D, NO HINGE

PREP NEEDED, CLOSER REINF, STEELCRAFT STRIKE

LOCATION.

GLASS2430WIRE 1/4 MISCO WIRE 24X30 VISION FRAME

CUT SIZE: 23" X 29"

24" W X 30" H PUTTY VISION

FRAME FOR 1/4" GLASS, LESS GLASS

HD CONTINUOUS HINGE

ALUMINUM 83", HEAVY DUTY FULL

SURFACE48" ALUM 1/2" x 5" SADDLE

THRESHOLD

RM. 838 BUILDING 200

REHANG DOOR ON SURFACE ROTON HINGE AND INSTALL 5” HINGE FILLERS

780-157HD CONTIUS HINGE ALUMINUM 83”, HEAVY DUTY FULL SURFACE, U/L-FF

SHF-50 DOOR HINGE CUT OUT FILLER 5” X 1-1/2”

Bldg. 17 rm. 121

REPLACE WOOD FIRE RATED DOOR

CONTINIOUS HINGE

DOOR CLOSER

BLDG 224

Replace existing double doors with 16 ga. Steel hung on continuous hinges. All locking and closing hardware to be re-used. Doors will need to be field measured

BLDG 222

Replace existing double doors with 16 ga. Steel hung on continuous hinges

BLDG 17 RM 202

Bldg. 2 East side Basement

Remove and replace hollow metal LH 3’-0” x 7’-0” hollow metal door and frame 12” jamb Replace frame dimpled for masonry anchors and grouted, door with 5” x 20” lite kit, electric strike interior exit device LCN rim cylinder or equivalent, exterior trim and thumb latch, reconnect all card readers and audible door alarms, continuous surface mount aluminum roton hinge, patch and paint interior walls, prime and paint door and frame to match original, install saddle threshold and weather strip. Install LCN 4040XP or equivalent HD door closer. VA will install lock core salvaged from existing door.

Bldg. 2 North and South Basement doors

Remove and replace hollow metal LH, RH, 3’-4” x 7’-0” hollow metal door and frame 12” jamb Replace frame dimpled for masonry anchors and grouted, door with 5” x 20” lite kit, electric strike interior exit device LCN rim cylinder or equivalent, continuous surface mount aluminum roton hinge, exterior trim and thumb latch, reconnect all card readers and audible door alarms, patch and paint interior walls, prime and paint door and frame to match original, install saddle threshold and weather strip. Install LCN 4040XP or equivalent HD door closer. VA will install lock core salvaged from existing door. Salvage and reinstall overhead arched glass transom.

Bldg. 1 “D” Lobby Stairwell Tunnel Access door

Remove and replace existing RH, 3’-8” 7’-0” wood door and metal frame w/ 16 ga. hollow metal door and dimpled frame fully grouted and anchored into masonry, provide an install lever handle Rhodes 626, Schlage or equivalent Storeroom function lockset w/SFIC lock to be supplied by VA upon completed installation. Supply and install brush type door sweep and weather stripping. Finish all wall and flooring disturbed by demolition to existing state prior to demolition. Install LCN 4040XP or equivalent door closer.

Bldg. 20 Elevator Penthouse

Remove and replace existing 3’-0” x 7’-0” hollow metal door anchored into masonry wall, w/16ga. 5”-3/4” jamb width hollow metal fully grouted fame and metal door. Replace existing locking hardware w/Schlage or equivalent Storeroom function lever handle Rhodes 626, SFIC, VA will install lock core upon completed installation. Install threshold and brush type door sweep and weather stripping. Restore all finishes to existing condition prior to demolition. Paint interior door and frame to match existing.

Bldg. 200 2nd floor Surgery Suites 1-6

Replace 3 sets of double doors R.O. 72” x 84-1/4” door size is approximate will need to be field confirmed 35-5/8” x 83-14” (3) Right hand sets and (3) left Hand sets. Hinges are to be continuous swing clear, door edge guards on the strike side to be just under the latch pockets. All other existing hardware and operators to be re-used.

Bldg 228

(5) Additional 3’-0” x 7’-0” doors metal and or wood Continuous hinge door closer Re-use lockset