S06_SCHEDULE_FOR_FINISHES_090600.pdf

Dept. of Veterans Affairs VA Project #646-16-109 VA Pittsburgh Healthcare System UD Replace Kitchen AHU (AC-6) Pittsburgh, PA Construction Bid Documents: 06/15/18

09 06 00 - i

SECTION 09 06 00

SCHEDULE FOR FINISHES

SECTION 09 06 00-SCHEDULE FOR FINISHES

VAMC:

Location: Pittsburgh, PA

Project no. and Name: #646-16-109 – Replace Kitchen AHU 6 at UD

Submission: Construction Bid Documents

Date: 06/15/18

INSTRUCTIONS FOR PREPARATON OF

SECTION 09 06 00-SCHEDULE FOR FINISHES

09 06 00 - 1

SECTION 09 06 00

SCHEDULE FOR FINISHES

PART I – GENERAL

1.1 DESCRIPTION

This section contains a coordinated system in which requirements for materials specified in other sections shown are identified by abbreviated material names and finish codes in the room finish schedule or shown for other locations.

1.2 MANUFACTURERS

Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equivalent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of technical specifications will be acceptable upon approval in writing by contracting officer for finish requirements.

1.3 SUBMITALS

Submit in accordance with SECTION 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES provide quadruplicate samples for color approval of materials and finishes specified in this section.

1.4 APPLICABLE PUBLICATIONS

A. Publications listed below form a part of this specification to the extent referenced. Publications are referenced in text by basic designation only.

B. MASTER PAINTING INSTITUTE: (MPI)

2001....................Architectural Painting Specification Manual

09 06 00 - 2

PART 2- PRODUCTS

A. Section 04 05 13, MASONRY MORTARING and Section 04 05 16, MASONRY GROUTING

Finish Code Manufacturer Mfg. Color Name

M1 Match existing mortar

B. Section 04 20 00, UNIT MASONRY

1. FACE BRICK (FB)

Finish Code Size Pattern Manufacturer Mfg. Color Name/No.

BR1 Match existing Match existing Match existing

2.1 DIVISION 07 - THERMAL AND MOISTURE PROTECTION

A. SECTION 07 92 00, JOINT SEALANTS

Location Color Manufacturer Manufacturer Color

Louver to Masonry Wall Match Grout

Access Panel to Ceiling White

Acoustical Ceiling to Wall

White

09 06 00 - 3

2.2 DIVISION 08 - OPENINGS

A. SECTION 08 31 13, ACCESS DOORS AND FRAMES

Material Finish/Color

Steel Paint to match adjacent surface P#

2.3 DIVISION 09 - FINISHES

A. SECTION 09 51 00, ACOUSTICAL CEILINGS

Finish Code Component Color Pattern Manufacturer Mfg Name/No.

Exposed Suspension System

White (WH) Armstrong - Or equal

Type III White (WH) Armstrong - Or equal

School Zone Fine Fissured / #1717

Type IV White (WH Armstrong - Or equal

Ultima Health Zone / #1445

B. SECTION 09 91 00, PAINT AND COATINGS

1. MPI Gloss and Sheen Standards

Gloss @60 Sheen @85

09 06 00 - 4

Gloss Level 1 a traditional matte finish-flat max 5 units, and max 10 units

Gloss Level 2 a high side sheen flat-“a velvet-like” max 10 units, and finish 10-35 units

Gloss Level 3 a traditional “egg-shell like” finish 10-25 units, and 10-35 units

Gloss Level 4 a “satin-like” finish 20-35 units, and min. 35 units

Gloss Level 5 a traditional semi-gloss 35-70 units

Gloss Level 6 a traditional gloss 70-85 units

Gloss level 7 a high gloss more than 85 units

2. Paint code Gloss Manufacturer Mfg. Color Name/No.

P1 – Interior ceiling

P2 – Interior Ceiling Wet

P3 – Interior Metal and Piping

P4 – Exterior Metal

C. SECTION 08 90 00, LOUVERS AND WALL VENTS

Item Material Finish Manufacturer Mfg. Color Name/No.

Aluminum Organic Coating Match existing window color

A. SECTION 26 51 00, BUILDING LIGHTING INTERIOR

Fixture Type Exterior Finish Color

09 06 00 - 5

PART III EXECUTION

3.1 FINISH SCHEDULES & MISCELLANEOUS ABBREVIATIONS

FINISH SCHEDULE & MISCELLANEOUS ABBREVIATIONS

Term Abbreviation

Access Flooring AF Accordion Folding Partition

AFP

Acoustical Ceiling AT Acoustical Ceiling, Special Faced

AT (SP)

Acoustical Metal Pan Ceiling

AMP

Acoustical Wall Panel AWP Acoustical Wall Treatment

AWT

Acoustical Wallcovering AWF Anodized Aluminum Colored

AAC

Anodized Aluminum Natural Finish

AA

Baked On Enamel BE Brick Face BR Brick Flooring BF Brick Paving BP Carpet CP Carpet Athletic Flooring

CAF

Carpet Module Tile CPT Ceramic Glazed Facing Brick

CGFB

Ceramic Mosaic Tile FTCT Concrete C Concrete Masonry Unit CMU Divider Strips Marble DS MB Epoxy Coating EC Epoxy Resin Flooring ERF Existing E Exposed Divider Strips EXP Exterior EXT Exterior Finish System EFS Exterior Paint EXT-P Exterior Stain EXT-ST Fabric Wallcovering WF Facing Tile SCT Feature Strips FS Floor Mats & Frames FM Floor Tile, Mosaic FT Fluorocarbon FC Folding Panel Partition FP Foot Grille FG Glass Masonry Unit GUMU Glazed Face CMU GCMU Glazed Structural Facing Tile

SFTU

09 06 00 - 6

Granite GT Gypsum Wallboard GWB High Glazed Coating SC Latex Mastic Flooring LM Linear Metal Ceiling LMC Linear Wood Ceiling LWC Marble MB Material MAT Mortar M Multi-Color Coating MC Natural Finish NF Paint P Paver Tile PVT Perforated Metal Facing (Tile or Panels)

PMF

Plaster PL Plaster High Strength HSPL Plaster Keene Cement KC Plastic Laminate HPDL Polypropylene Fabric Wallcovering

PFW

Porcelain Paver Tile PPT Quarry Tile QT Radiant Ceiling Panel System

RCP

Resilient Stair Tread RST Rubber Base RB

Rubber Tile Flooring RT Spandrel Glass SLG Stain ST Stone Flooring SF Structural Clay SC Suspension Decorative Grids Grids

SDG

Terrazzo Portland Cement

PCT

Terrazzo Tile TT Terrazzo, Thin Set Textured Gypsum Ceiling Panel

TGC

Textured Metal Ceiling Panel

TMC

Thin set Terrazzo TST Veneer Plaster VP Vinyl Base VB Vinyl Coated Fabric Wallcovering

W

Vinyl Composition Tile VCT Vinyl Sheet Flooring VSF Vinyl Sheet Flooring (Welded Seams)

WSF

Wall Border WB Wood WD

3.2 FINSIH SCHEDULE SYMBOLS

DESIGNER NOTE: Do not substitute these symbols. Add new symbols as required.

Symbol Definition ** Same finish as adjoining walls

- No color required E Existing

09 06 00 - 7

XX To match existing EFTR Existing finish to remain RM Remove

3.3 ROOM FINISH SCHEDULE

DESIGNER NOTE: Copy as stated for projects requiring alterations.

A. Match adjoining or existing similar surfaces colors, textures or patterns where disturbed or damaged by alterations or new work when not scheduled.

DESIGNER NOTE: Use the schedule below to edit for rooms on project include existing rooms demolished and delete new section not part of new work. Use new section to show revision to existing work. Delete exist Sections for new construction.

B. ROOM FINISH SCHEDULE

Room No.

and Name

FLOOR

BASE

WALL

WAINSCOT

CEILING

REMARKS

E X I S T

MAT FC

MAT FCC MAT FCC MAT FC MAT FCC

N

E

S

W

C

N

S

09 06 00 - 8

W W

C

E X I S T

N

E

S

W

N

E

S

W

C

E X I S T

N

E

S

W

N

E

S

--- E N D---