36C24224Q0240_1.docx

SUBJECT*

BRAND NAME OR EQUAL - Surgical Dental Drill System

GENERAL INFORMATION

CONTRACTING OFFICE ADDRESS

Department of Veterans Affairs Network Contracting Office NCO2 20 Madison Avenue Extension Albany NY 12203

POINT OF CONTACT*

Contracting Officer Lindsay Goldsmith Lindsay.Goldsmith@va.gov

PLACE OF PERFORMANCE

VA New Jersey Healthcare System

Toms River VA Outpatient Clinic

1055 Hooper Avenue

Toms River New Jersey

COUNTRY

ADDITIONAL INFORMATION

AGENCY’S URL

URL DESCRIPTION

AGENCY CONTACT’S EMAIL ADDRESS

EMAIL DESCRIPTION

Combined Synopsis/Solicitation Notice Combined Synopsis/Solicitation Notice

DESCRIPTION

Combined Synopsis/Solicitation Notice

The Department of Veterans Affairs on behalf of the VA New Jersey Healthcare System in Toms River NJ, has a BRAND NAME OR EQUAL requirement for Surgical Dental Drill Systems as defined below.

This requirement is set aside for service-disabled veteran owned small businesses (SDVOSB).

All verified SDVOSB vendors meeting the standard of an acceptable source under the terms of either a manufacturer or authorized distributor are encouraged to provide a bid.

All vendors are required to be registered with the System for Award Management (sam.gov) and deemed in good standing and available for award. All bids shall include the vendors unique entity identifier number provided by sam.gov.

All bidders shall be registered with / verified by SBA Vet Cert and provide proof to that extent.

All vendors claiming authorized distributor status must provide a letter from the manufacturer.

Quotes shall be Firm Fixed Price (FFP); evaluations will be based on Best Value Criteria, in accordance with FAR 52.212-2, and utilizing the evaluation factors of price, technical compliance and delivery / installation schedule (see clauses below).

Items listed in this requirement;

Description: A brand name or equal system shall feature stainless steel construction of handpieces, drills, and reamers. Salient characteristics of a technically acceptable unit:

Handpiece shall have 20K RPM low speed motor

· Low speed handpiece shall have lube free manual latch angle

· Low speed handpiece shall include attachment for motor to connect to angle

· Low speed handpiece shall include lube free attachment for straight nose cone

· Low speed handpiece shall include torque multiplier to reduce speed four to one and increase torque by a multiple of four High speed swivel with replaceable turbine fiberoptic lube free handpieces

· No load speed of at least 400,00 RPM

· Operating air pressure of at least: 30-34 PSI

· 360Deg quick disconnect swivel 4-line ISO or 6 pin F.O. configuration Shall include 4-hole fiberoptic swivel High speed fiber optic with a swivel and replaceable auto chuck turbine

· No load speed of at least 430,00 RPM

· Operating air pressure of at least: 38-43 PSI

· Water Consumption High speed swivel with replaceable turbine lube free handpieces(non-fiberoptic)

· No load speed of at least 400,00 RPM

· Operating air pressure of at least: 30-34 PSI

· 360Deg quick disconnect swivel 4 line or 2-line ISO Configuration

This procurement is limited to new equipment only. Used, gray, refurbished or aftermarket equipment will not be considered for this requirement. The Veterans Health Administration prohibits the use of gray/ aftermarket items in their Medical Centers. Gray/ aftermarket items are considered to be items outside of the original equipment manufacturer's intended distribution channels. Quotes for other than new, will be deemed non-compliant and will be removed from the competitive range without discussion.

Delivery shall be quoted Free on Board (FOB) to the Department of Veterans Affairs, VA New Jersey Healthcare System, Toms River VA Outpatient Clinic, 1055 Hooper Avenue Toms River, NJ 08753.

CLAUSES

ADDENDUM to 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

(a) Basis for Award. The Government will issue a purchase order to the responsible quoter whose quotation conforming to the solicitation will be most advantageous to the Government, price and other factors considered.

(b) The following factors shall be used to evaluate quotations:

1. Price

2. Technical Compliance with the SOW.

3. Delivery and Installation Schedule

(c) Evaluation Approach. The Government will evaluate quotations using the comparative evaluation process outlined in FAR 13.106-2 (b) (3), where quotations will be compared to one another to determine which provides the best benefit to the Government. The Government reserves the right to consider a quotation other than the lowest price that provides additional benefit(s). Quotations may exceed minimum requirements of the solicitation. The Government reserves the right to select a quotation that provides benefit to the Government that exceeds the minimum requirements of the solicitation but is not required to do so. Each response must meet the minimum requirements of the solicitation. The Government is not requesting or accepting alternate quotations. The evaluation will consider the following:

(1) Price: The Government will evaluate the price by adding the total of all line-item prices. The Total Evaluated Price will be that sum.

(2) Technical Compliance: The proposed units compliance with the salient characteristics and the SOW.

(3) Delivery and installation schedule: The Government will evaluate the schedule by total days proposed for completed installed job.

CLAUSES INCORPORATED BY REFERENCE:

FAR 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.

FAR 52.212-3 Offeror Representations and Certifications—Comm Products and Comm Services.

FAR 52.212-4 Contract Terms and Conditions—Commercial Products and Commercial Services FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services.

Responses to this notice must be submitted in writing via email to lindsay.goldsmith@va.gov and must be received not later than Tuesday, January 16, 2024, at 12:00 PM. No telephone inquiries will be accepted. Late submissions shall be treated in accordance with the solicitation provision FAR 52.212-1(f).

See attached document: S02 36C24224Q0240.

See attached document: D4262 Drill System SOW.

Page 1 of