Rev.1 _ Scope Clarification.pdf
PDF 2 MB Posted
- Attached to
- Y1DA--Relocate & Upgrade ANGIO Suite Federal contract opportunity
- Solicitation number
- 36C24221B0010
About this file
This solicitation is for construction services to relocate and upgrade an angiography suite at a Veterans Affairs medical center. The scope of work includes general construction, structural alterations, asbestos abatement, HVAC, plumbing and electrical work to renovate areas on the first floor for the new angiography suite. The contractor will demolish existing structures, furnish all labor and materials, and perform the renovation work according to the drawings and specifications. The project cost estimate is between $2 million and $5 million, and work must be completed within 365 calendar days. Responses are due in hard copy by the date specified in the solicitation, which will be posted on SAM.gov on or around December 4, 2020. Bidders must be registered in SAM.gov and verified as a service-disabled veteran-owned small business in VetBiz.gov to be considered for this set-aside contract with the Department of Veterans Affairs.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 36C24221B0010 0004.docx | DOCX document | |
| 36C24221B0010 0003.docx | DOCX document | |
| Physicist Recommendations.pdf | ||
| 36C24221B0010 0002.docx | DOCX document | |
| RFI-3_A-6 RED CLINIC A-LEVEL.pdf | ||
| Interior Signage Standard.pdf | ||
| Site Visit Sign-in Sheet.pdf | ||
| RFI-3_ST9 1ST FLOOR FRAMING (WINGS).pdf | ||
| RFI-13_A34 LONGITUDINAL SECTION X-X.pdf | ||
| Door Hardware Specs.pdf | ||
| 36C24221B0010 0001.docx | DOCX document | |
| ISSUE FOR BID Spec.pdf | ||
| Arch-Abate Drawing.pdf | ||
| FP Drawing.pdf | ||
| PLUMB Drawing.pdf | ||
| ELEC Drawing.pdf | ||
| MECH Drawing.pdf | ||
| Struct Drawing.pdf | ||
| 36C24221B0010_1.docx | DOCX document |
Show all 19
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STAIR 4
STAIR 3
SHAFT
SHAFT
ELEV. 8
ELEV. 7
SHAFT 7 ELEV. 11
Project Number
Building Number
Drawing Number
Project Title
Location
Issue Date Checked Drawn
Drawing Title
Approved:
VA FORM 08 - 6231
A
Fi le
P at h 6/
/2
:3
9:
P M
Office of Construction and Facilities Management
U.S. Department of Veterans Affairs
B
C
D
E
F
A
B
C
D
E
F
21 4 5 6 7 8 9 10
PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT
321 4 5 6 7 8 9 10
Environmental Consultant:
Project Director
Revisions: Date:
561-CSI-181
386 TREMONT AVENUE, EAST ORANGE, NJ
RELOCATE & RENOVATE ANGIO SUITE
1ST FLOOR
MICHAEL AVRAMIDES ARCHITECT
319 E 50TH STREET, STUDIO E
NEW YORK, NY 10022
T:917.855.8111 Approved: Assoc Project Director
Approved: Chief Engineer
Approved: Safety Manager
Approved: NAL
Approved: PCC/Service Director
ISSUE FOR BIDASBESTOS ABATEMENT PLAN -
1ST FLOOR
1-AA100
CONTRACTOR SHALL PROVIDE PORTABLE CABINET-MOUNTED AIR FILTRATION DEVICES
(AFDS) EQUIPPED WITH HEPA FILTRATION AT 99.97% EFFICIENCY, TO 3 MICRONS. THE
NUMBER OF AFD'S SHALL BE IN SUCH A MANNER AS TO INSURE A MINIMUM OF FOUR (4)
COMPLETE AIR CHANGES PER HOUR AND MAINTAIN A MAXIMUM NEGATIVE PRESSURE
DIFFERENTIAL OF 0.02 INCHES OF WATER.
AutoCAD SHX Text
EXISTING 30 MIN. SMOKE BARRIER TO BE REPLACED BY 1 HR RATED SMOKE BARRIER
AutoCAD SHX Text 1-236A
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-000
AutoCAD SHX Text
ROOM
AutoCAD SHX Text 1-261
AutoCAD SHX Text
ANGIO
AutoCAD SHX Text 1-259B
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-258
AutoCAD SHX Text
UTILITY
AutoCAD SHX Text 1-256
AutoCAD SHX Text
WORK RM
AutoCAD SHX Text 1-255C
AutoCAD SHX Text
RESIDENTS
AutoCAD SHX Text
CONFERENCE
AutoCAD SHX Text 1-192B
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-203
AutoCAD SHX Text
FILE RM
AutoCAD SHX Text 1-257
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-000
AutoCAD SHX Text
ROOM
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text C
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text J
AutoCAD SHX Text K
AutoCAD SHX Text 1-209A
AutoCAD SHX Text
DRESSING
AutoCAD SHX Text 1-220A
AutoCAD SHX Text
HALLWAY
AutoCAD SHX Text
FEC
AutoCAD SHX Text 1-E-107
AutoCAD SHX Text
ELEC.
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text
FEC
AutoCAD SHX Text
FEC
AutoCAD SHX Text
FEC
AutoCAD SHX Text 1-213
AutoCAD SHX Text
SUB
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-215
AutoCAD SHX Text
MRI
AutoCAD SHX Text 1-215B
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-215A
AutoCAD SHX Text
DRESSING
AutoCAD SHX Text 1-213A
AutoCAD SHX Text
ELEC
AutoCAD SHX Text 1-214
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-218H
AutoCAD SHX Text
PACS
AutoCAD SHX Text
READING
AutoCAD SHX Text 1-218I
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-218J
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-218K
AutoCAD SHX Text
HCPD
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-218L
AutoCAD SHX Text
GYRO
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-218N
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-218D
AutoCAD SHX Text
EQUIP
AutoCAD SHX Text 1-218C
AutoCAD SHX Text
MRI PREP
AutoCAD SHX Text 1-218F
AutoCAD SHX Text
MRI
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-218E
AutoCAD SHX Text
MRI EXAM
AutoCAD SHX Text 1-212
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-220A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-221A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-210A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-211A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-229A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-234
AutoCAD SHX Text
HALL
AutoCAD SHX Text 1-231
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-236
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-235
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-223
AutoCAD SHX Text
NURSES
AutoCAD SHX Text 1-228
AutoCAD SHX Text
CT
AutoCAD SHX Text 1-228A
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-208
AutoCAD SHX Text
CLEAN
AutoCAD SHX Text 1-226A
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-218M
AutoCAD SHX Text
HALL
AutoCAD SHX Text 1-164
AutoCAD SHX Text
LOCKERS
AutoCAD SHX Text 1-233C
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-210
AutoCAD SHX Text
ULTRASOUND
AutoCAD SHX Text 1-211
AutoCAD SHX Text
ULTRASOUND
AutoCAD SHX Text 1-207
AutoCAD SHX Text
DIRTY
AutoCAD SHX Text 1-206
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-205
AutoCAD SHX Text
READING
AutoCAD SHX Text 1-222
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text 1-209
AutoCAD SHX Text
BONE
AutoCAD SHX Text 1-230
AutoCAD SHX Text
SUB
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-226
AutoCAD SHX Text
CT
AutoCAD SHX Text 1-229
AutoCAD SHX Text
STRETCHER
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-233A
AutoCAD SHX Text
DIGITAL
AutoCAD SHX Text
RADIOGRAPHY 1
AutoCAD SHX Text 1-233B
AutoCAD SHX Text
DIGITAL
AutoCAD SHX Text
RADIOGRAPHY 2
AutoCAD SHX Text 1-220
AutoCAD SHX Text R / F
AutoCAD SHX Text 1-221
AutoCAD SHX Text R / F
AutoCAD SHX Text 1-164A
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-164B
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-227E
AutoCAD SHX Text
SCRUBS
AutoCAD SHX Text 1-167
AutoCAD SHX Text
MENS
AutoCAD SHX Text 1-168
AutoCAD SHX Text
DUMB
AutoCAD SHX Text
WAITER
AutoCAD SHX Text 1-168A
AutoCAD SHX Text
IRM CLOS
AutoCAD SHX Text
ABATE ACM PIPE RISER INSULATION (ASSUMED IN PLASTER CHASE)
AutoCAD SHX Text
ABATE ACM PIPE RISER INSULATION (ASSUMED IN PLASTER CHASE)
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
ASBESTOS ABATEMENT PLAN - 1ST FLOOR (C-WING)
AutoCAD SHX Text
AutoCAD SHX Text
AA100
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
KEY MAP
AutoCAD SHX Text N
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text 1.
AutoCAD SHX Text ASBESTOS ABATEMENT SHALL BE CONDUCTED IN ACCORDANCE WITH THE CURRENT ASBESTOS MANAGEMENT POLICY FOR VETERANS ADMINISTRATION CONSTRUCTION PROJECTS AND THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text 2.
AutoCAD SHX Text CONTRACTOR SHALL FURNISH ALL LABOR MATERIALS, FACILITIES, EQUIPMENT, SERVICES, ETC NECESSARY TO PERFORM THE WORK REQUIRED FOR ASBESTOS ABATEMENT IN ACCORDANCE WITH THE CONTRACT SPECIFICATIONS, EPA, OSHA REGULATIONS AND NIOSH RECOMMENDATIONS, STATE OF NEW JERSEY REGULATIONS, AND ANY OTHER APPLICABLE FEDERAL, STATE, AND LOCAL GOVERNMENT REGULATIONS.
AutoCAD SHX Text 6.
AutoCAD SHX Text CONTRACTOR SHALL EXHAUST PORTABLE AFD UNITS AT THE LOCATIONS INDICATED ON THE CONTRACT DRAWINGS. ALL PORTABLE AFDS SHALL EXHAUST OUTSIDE THE BUILDING, UNLESS OTHERWISE APPROVED BY THE VPIH CONSULTANT.
AutoCAD SHX Text 7.
AutoCAD SHX Text 3.
AutoCAD SHX Text CONTRACTOR SHALL PROVIDE SIGNS, LABELS, WARNINGS, AND POSTED INSTRUCTIONS THAT ARE NECESSARY TO PROTECT, INFORM AND WARN PEOPLE OF THE HAZARD FROM ASBESTOS EXPOSURE.
AutoCAD SHX Text 5.
AutoCAD SHX Text 4.
AutoCAD SHX Text CONTRACTOR SHALL COMPLETELY ISOLATE WORK AREA AS DESCRIBED IN THE CONTRACT SPECIFICATIONS. ALL CRITICAL BARRIERS, DECONTAMINATION CHAMBER, 6-MIL POLYETHYLENE SHEETING AND NEGATIVE AIR FILTRATION DEVICES, ETC. ARE TO BE IN PLACE AND APPROVED BY THE PROJECT CONSULTANT PRIOR TO ASBESTOS REMOVAL COMMENCES.
AutoCAD SHX Text CONTRACTOR SHALL COMPLETE THE ASBESTOS THERMAL SYSTEM INSULATION ABATEMENT WORK SPECIFIED UTILIZING THE GLOVEBAG REMOVAL METHOD IN CONJUNCTION WITH THE ESTABLISHMENT OF LIMITED WORK AREA ENCLOSURES IN ACCORDANCE WITH N.J.A.C. 5:23-8:19 "LIMITED CONTAINMENT REMOVALS", AND THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text 8.
AutoCAD SHX Text CONTRACTOR SHALL CONSTRUCT A THREE-STAGE DECONTAMINATION UNIT AS INDICATED IN THE PROJECT SPECIFICATIONS. DECONTAMINATION UNIT SHALL BE SUFFICIENT SIZE TO ACCOMODATE STORAGE OF MATERIALS, EQUIPMENT, ETC. WHILE ALLOWING FOR THE PASSAGE OF LABORERS AND THEIR EQUIPMENT BETWEEN CLEAN AND CONTAMINATED AREAS.
AutoCAD SHX Text
EXTENT OF WORK AREA
AutoCAD SHX Text
LEGEND
AutoCAD SHX Text ABATE ASBESTOS CONTAINING PIPE RISER / STRAIGHT RUN INSULATION ASSUMED IN PIPE CHASES (EXISTING PIPING AND INSULATION TO REMAIN WHERE EXISTING PIPE CHASES ARE NOT DISTURBED)
AutoCAD SHX Text
NEGATIVE AIR FILTRATION UNIT
AutoCAD SHX Text
AFD EXHAUST FROM WORK AREA TO EXTERIOR
AutoCAD SHX Text BRIGGS ASSOCIATES 3 CROSSWICKS STREET BORDENTOWN, NJ 08505 t: (609) 298-5520
AutoCAD SHX Text
REVISION 1 SCOPE CLARIFICATION
AutoCAD SHX Text
AutoCAD SHX Text
8 JAN 2021
AutoCAD SHX Text
AutoCAD SHX Text
SHAFT
SHAFT
ELEV. 8
ELEV. 7
SHAFT 7 ELEV. 11
TEMP CONSTRUCTION BARRIER
Project Number
Building Number
Drawing Number
Project Title
Location
Issue Date Checked Drawn
Drawing Title
Approved:
VA FORM 08 - 6231
A
Fi le
P at h 6/
/2
:3
9:
P M
ISSUE FOR BIDOffice of Construction and Facilities Management
U.S. Department of Veterans Affairs
B
C
D
E
F
A
B
C
D
E
F
21 4 5 6 7 8 9 10
PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT
321 4 5 6 7 8 9 10
Architectural Design Consultant:
Project Director
9 OCT 2020Revisions: Date:
561-CSI-181
386 TREMONT AVENUE, EAST ORANGE, NJ
RELOCATE & RENOVATE ANGIO SUITE
1ST FLOOR
THINKFORM DESIGN ARCHITECT LLC
38 EAST BROAD STREET
HOPEWELL, NJ 08525
T:855.821.0274 F:609.644.4397
MICHAEL AVRAMIDES ARCHITECT
319 E 50TH STREET, STUDIO E
NEW YORK, NY 10022
T:917.855.8111 Approved: Assoc Project Director
Approved: Chief Engineer
Approved: Safety Manager
Approved: NAL
Approved: PCC/Service Director 1-AD100
DEMOLITION PLAN & NOTES
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1-236A
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1-261
AutoCAD SHX Text
ANGIO
AutoCAD SHX Text 1-259B
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-258
AutoCAD SHX Text
UTILITY
AutoCAD SHX Text 1-256
AutoCAD SHX Text
WORK RM
AutoCAD SHX Text 1-255C
AutoCAD SHX Text
RESIDENTS
AutoCAD SHX Text
CONFERENCE
AutoCAD SHX Text 1-192B
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-203
AutoCAD SHX Text
FILE RM
AutoCAD SHX Text 1-257
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text C
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text J
AutoCAD SHX Text K
AutoCAD SHX Text 1-209A
AutoCAD SHX Text
DRESSING
AutoCAD SHX Text 1-220A
AutoCAD SHX Text
HALLWAY
AutoCAD SHX Text
FEC
AutoCAD SHX Text 1-E-107
AutoCAD SHX Text
ELEC.
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text
FEC
AutoCAD SHX Text
FEC
AutoCAD SHX Text 1-213
AutoCAD SHX Text
SUB
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-215
AutoCAD SHX Text
MRI
AutoCAD SHX Text 1-215B
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-215A
AutoCAD SHX Text
DRESSING
AutoCAD SHX Text 1-213A
AutoCAD SHX Text
ELEC
AutoCAD SHX Text 1-214
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-218H
AutoCAD SHX Text
PACS
AutoCAD SHX Text
READING
AutoCAD SHX Text 1-218I
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-218J
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-218K
AutoCAD SHX Text
HCPD
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-218L
AutoCAD SHX Text
GYRO
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-218N
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-218D
AutoCAD SHX Text
EQUIP
AutoCAD SHX Text 1-218C
AutoCAD SHX Text
MRI PREP
AutoCAD SHX Text 1-218F
AutoCAD SHX Text
MRI
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-218E
AutoCAD SHX Text
MRI EXAM
AutoCAD SHX Text 1-212
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-220A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-221A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-210A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-211A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-229A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-234
AutoCAD SHX Text
HALL
AutoCAD SHX Text 1-231
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-236
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-235
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-223
AutoCAD SHX Text
NURSES
AutoCAD SHX Text 1-228
AutoCAD SHX Text
CT
AutoCAD SHX Text 1-228A
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-208
AutoCAD SHX Text
CLEAN
AutoCAD SHX Text 1-226A
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-218M
AutoCAD SHX Text
HALL
AutoCAD SHX Text 1-164
AutoCAD SHX Text
LOCKERS
AutoCAD SHX Text 1-233C
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-210
AutoCAD SHX Text
ULTRASOUND
AutoCAD SHX Text 1-211
AutoCAD SHX Text
ULTRASOUND
AutoCAD SHX Text 1-207
AutoCAD SHX Text
DIRTY
AutoCAD SHX Text 1-206
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-205
AutoCAD SHX Text
READING
AutoCAD SHX Text 1-222
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text 1-209
AutoCAD SHX Text
BONE
AutoCAD SHX Text 1-230
AutoCAD SHX Text
SUB
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-226
AutoCAD SHX Text
CT
AutoCAD SHX Text 1-229
AutoCAD SHX Text
STRETCHER
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-233A
AutoCAD SHX Text
DIGITAL
AutoCAD SHX Text
RADIOGRAPHY 1
AutoCAD SHX Text 1-233B
AutoCAD SHX Text
DIGITAL
AutoCAD SHX Text
RADIOGRAPHY 2
AutoCAD SHX Text 1-220
AutoCAD SHX Text R / F
AutoCAD SHX Text 1-221
AutoCAD SHX Text R / F
AutoCAD SHX Text 1-164A
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-164B
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-227E
AutoCAD SHX Text
SCRUBS
AutoCAD SHX Text 1-167
AutoCAD SHX Text
MENS
AutoCAD SHX Text 1-168
AutoCAD SHX Text
DUMB
AutoCAD SHX Text
WAITER
AutoCAD SHX Text 1-168A
AutoCAD SHX Text
IRM CLOS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1 HOUR RATED TEMPORARY CONSTRUCTION BARRIER & DOOR - VERIFY SLAB TO SLAB CLEAR PATH. REFER TO ICRA REQUIREMENTS ON G002 & SPECIFICATIONS. COORD WITH COR.
AutoCAD SHX Text 1 HOUR RATED TEMPORARY CONSTRUCTION BARRIER & DOOR - VERIFY SLAB TO SLAB CLEAR PATH. REFER TO ICRA REQUIREMENTS ON G002 & SPECIFICATIONS. COORD WITH COR.
AutoCAD SHX Text 1 HOUR RATED TEMPORARY CONSTRUCTION BARRIER & DOOR - VERIFY SLAB TO SLAB CLEAR PATH. REFER TO ICRA REQUIREMENTS ON G002 & SPECIFICATIONS. COORD WITH COR.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1-242C
AutoCAD SHX Text
MECH/
AutoCAD SHX Text
ELEC
AutoCAD SHX Text 1-240
AutoCAD SHX Text
PROCESS
AutoCAD SHX Text
VIEWING
AutoCAD SHX Text 1-227E
AutoCAD SHX Text
SCRUBS
AutoCAD SHX Text 1-242
AutoCAD SHX Text
CAT SCAN
AutoCAD SHX Text 1-225
AutoCAD SHX Text
CORR
AutoCAD SHX Text 1-243
AutoCAD SHX Text
MECH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text CORRIDOR DEMOLITION & CONSTRUCTION TO BE CONDUCTED AFTER HOURS AND WEEKENDS - GC TO COORD W/ COR & FOLLOW ALL ICRA REQUIREMENTS
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
FLEXIBLE SEALANT
AutoCAD SHX Text
TRACK-ATTACH WITH ANCHORS 2'-0" O.C. MAX
AutoCAD SHX Text
5/8" FIRE-RATED GYP BD BOTH SIDES, PUBLIC SIDE PTD WHITE
AutoCAD SHX Text
CEILING
AutoCAD SHX Text
SEALANT
AutoCAD SHX Text
CEILING TRACK
AutoCAD SHX Text
DRYWALL CASING
AutoCAD SHX Text 1HR RATED TEMPORARY CONSTRUCTION BARRIER - 5/8" TYPE X GYP BD - 3 5/8" 25 GAUGE STEEL STUDS @ 24" O.C. - TEST No. UL DES U419
AutoCAD SHX Text 1 1/2" = 1'-0"
AutoCAD SHX Text
LINE OF STRUCTURE ABOVE
AutoCAD SHX Text NOTES: 1. PARTITION TO BE FULL HT PARTITION TO BE FULL HT FLOOR SLAB TO STRUCTURE ABOVE, PASSING THRU INTERSTITIAL SPACE 2. GYP BED TO HAVE A MIN. GYP BED TO HAVE A MIN. LEVEL 3 FINISH ON THE PUBLIC SIDE 3. PUBLIC SIDE OF TEMP PUBLIC SIDE OF TEMP BARRIER TO DECORATED WITH APPLIED GRAPHICS 4. CONTRACTOR TO PUT UP CONTRACTOR TO PUT UP VA SIGNAGE (ON THE PUBLIC SIDE) STATING THE PROJECT NAME, NUMBER, COTR NAME, CONTRACTOR NAME, AND VA CONTACT NUMBERS. SIGNAGE TO BE PUT UP IN PLAQUES.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DEMOLITION PLAN - 1ST FLOOR (C-WING)
AutoCAD SHX Text
AutoCAD SHX Text
AD100
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
KEY MAP
AutoCAD SHX Text
LEGEND
AutoCAD SHX Text N
AutoCAD SHX Text
KEYED DEMOLITION NOTES
AutoCAD SHX Text
AREA OF WORK
AutoCAD SHX Text 1 REMOVE PARTITION IN ITS ENTIRETY. COORD W/ NEW PLANS FOR REMOVE PARTITION IN ITS ENTIRETY. COORD W/ NEW PLANS FOR EXTENT. 2 REMOVE DOOR, FRAME AND HARDWARE IN ITS ENTIRETY. 3 REMOVE FLOOR FINISHES DOWN TO CONC SLAB. CLEAN & PREP SLAB REMOVE FLOOR FINISHES DOWN TO CONC SLAB. CLEAN & PREP SLAB AS REQ'D TO RECEIVE NEW FINISHES. 4 REMOVE CEILING, CEILING GRID AND ALL ASSOCIATED HANGERS IN THEIR ENTIRETY. 5 GC TO COORD ALL IMAGING EQUIPMENT TO BE SALVAGED/REINSTALLED BY OWNER (UNLESS NOTED OTHERWISE). 6 REMOVE ALL CASEWORK IN ITS ENTIRETY. 7 REMOVE ALL WALL HUNG ITEMS & SUPPORTS FROM WALLS TO REMAIN, TYP. 8 REMOVE ALL PLUMBING FIXTURES IN THEIR ENTIRETY. 9 REMOVE EXIST INTERIOR MASONRY WALL 10 CUT AND CHIP OUT CONCRETE FLOOR FOR NEW DRAINS. PITCH NEW CONCRETE TO DRAIN - SEE PLUMB. COORDINATE SIZE OF REMOVAL WITH NEW WORK. 11 CUT AND CHIP OUT CONCRETE FLOOR FOR RECESSED DOOR CLOSURES WHERE SCHEDULED. COORDINATE SIZE OF REMOVAL WITH NEW WORK. 12 REMOVE EXISTING WINDOW SILL FOR REPLACEMENT W/ SOLID SURFACING MATERIAL. CONTRACTOR TO INSPECT FOR WATER/AIR INFILTRATION AND REGLAZE IF NECESSARY. 13 DEMOLISH WALL AS REQUIRED FOR NEW FRAMED OPENING 14 CREATE WALL OPENING AS REQUIRED FOR INSTALLATION OF NEW CREATE WALL OPENING AS REQUIRED FOR INSTALLATION OF NEW CONCEALED MED GAS WITHIN WALL - SEE PLUMB DWG'S 15 DOORS TO BE REPLACED WITH NEW SMOKE BARRIER DOORS. EXISTING DOORS TO BE REPLACED WITH NEW SMOKE BARRIER DOORS. EXISTING DOORS TO REMAIN IN PLACE UNTIL REPLACEMENT IS READY TO INSTALL.
AutoCAD SHX Text
GENERAL NOTE:
AutoCAD SHX Text REMOVAL OF MATERIALS TO COMPLY WITH PERTINENT DEMOLITION SPECIFICATION SECTIONS WITH PARTICULAR ATTENTION TO HAZMAT REQUIREMENTS AS OUTLINED IN SECTIONS 028213.19/ASBESTOS FLOOR TILE AND MASTIC ABATEMENT, AND 028213.13, GLOVEBAG ASBESTOS ABATEMENT.
AutoCAD SHX Text
1. REMOVE: REMOVE AND LEGALLY DISPOSE OF ITEMS EXCEPT THOSE INDICATED TO BE REINSTALLED, REMOVE: REMOVE AND LEGALLY DISPOSE OF ITEMS EXCEPT THOSE INDICATED TO BE REINSTALLED, : REMOVE AND LEGALLY DISPOSE OF ITEMS EXCEPT THOSE INDICATED TO BE REINSTALLED, SALVAGED, OR EXISTING. 2. SALVAGE: ITEMS INDICATED TO BE SALVAGED SHALL REMAIN THE OWNER'S PROPERTY. REMOVE, SALVAGE: ITEMS INDICATED TO BE SALVAGED SHALL REMAIN THE OWNER'S PROPERTY. REMOVE, : ITEMS INDICATED TO BE SALVAGED SHALL REMAIN THE OWNER'S PROPERTY. REMOVE, CLEAN AND PACK OR CRATE ITEMS TO PROTECT AGAINST DAMAGE. IDENTIFY CONTENTS OF CONTAINERS AND DELIVER TO OWNER'S DESIGNATED STORAGE AREA. 3. REINSTALL: REMOVE ITEMS INDICATED. CLEAN SERVICE AND OTHERWISE PREPARE THEM FOR REUSE. REINSTALL: REMOVE ITEMS INDICATED. CLEAN SERVICE AND OTHERWISE PREPARE THEM FOR REUSE. : REMOVE ITEMS INDICATED. CLEAN SERVICE AND OTHERWISE PREPARE THEM FOR REUSE. STORE AND PROTECT AGAINST DAMAGE. REINSTALL ITEMS IN THE SAME LOCATIONS OR IN LOCATIONS INDICATED. 4. EXISTING: ORIGINAL ITEM TO REMAIN. PROTECT CONSTRUCTION INDICATED AS EXISTING AGAINST EXISTING: ORIGINAL ITEM TO REMAIN. PROTECT CONSTRUCTION INDICATED AS EXISTING AGAINST : ORIGINAL ITEM TO REMAIN. PROTECT CONSTRUCTION INDICATED AS EXISTING AGAINST DAMAGE AND SOILING DURING SELECTIVE DEMOLITION. 5. RESTORE: ITEMS INDICATED SHALL BE BROUGHT BACK TO THEIR ORIGINAL CONDITION. ORIGINAL RESTORE: ITEMS INDICATED SHALL BE BROUGHT BACK TO THEIR ORIGINAL CONDITION. ORIGINAL : ITEMS INDICATED SHALL BE BROUGHT BACK TO THEIR ORIGINAL CONDITION. ORIGINAL CONDITION IS THE CONDITION THAT THE REFERENCED ITEM WAS IN WHEN THE BUILDING WAS FIRST CONSTRUCTED. 6. REPLACE: EXISTING ITEM TO BE REMOVED. PROVIDE NEW ITEM TO MATCH EXISTING.REPLACE: EXISTING ITEM TO BE REMOVED. PROVIDE NEW ITEM TO MATCH EXISTING.: EXISTING ITEM TO BE REMOVED. PROVIDE NEW ITEM TO MATCH EXISTING.
AutoCAD SHX Text
P. DEFINITIONS:
AutoCAD SHX Text A. THE CONTRACTOR SHALL VERIFY ALL EXISTING CONDITIONS IN THE FIELD AND COORDINATE ALL REMOVAL THE CONTRACTOR SHALL VERIFY ALL EXISTING CONDITIONS IN THE FIELD AND COORDINATE ALL REMOVAL ACTIVITIES WITH NEW CONSTRUCTION. THE CONTRACTOR SHALL REPORT ALL DISCREPANCIES TO THE OWNER'S REPRESENTATIVE FOR RESOLUTION PRIOR TO BEGINNING REMOVALS. B. PROTECT ALL CONSTRUCTION TO REMAIN FROM DAMAGE DURING REMOVAL OF ADJACENT CONSTRUCTION. PROTECT ALL CONSTRUCTION TO REMAIN FROM DAMAGE DURING REMOVAL OF ADJACENT CONSTRUCTION. REPAIR/REPLACE CONSTRUCTION TO REMAIN THAT WAS DAMAGED DURING DEMOLITION TO MATCH THE QUALITY OF THE NEW WORK. C. THE ARCHITECTURAL DRAWINGS SHOW PRINCIPAL AREAS WHERE WORK MUST BE ACCOMPLISHED UNDER THIS THE ARCHITECTURAL DRAWINGS SHOW PRINCIPAL AREAS WHERE WORK MUST BE ACCOMPLISHED UNDER THIS CONTRACT. INCIDENTAL WORK MAY ALSO BE NECESSARY IN AREAS NOT SHOWN ON THE ARCHITECTURAL DRAWINGS DUE TO CHANGES AFFECTING EXISTING ELECTRICAL, OR OTHER SYSTEMS. SUCH INCIDENTAL WORK IS ALSO A PART OF THE CONTRACT. CONTRACTOR SHALL INSPECT THOSE AREAS AND ASCERTAIN WORK NEEDED AND DO THAT WORK IN ACCORDANCE WITH THE CONTRACT REQUIREMENTS AND AT NO ADDITIONAL COST TO THE OWNER. D. DO NOT DRILL OR CUT EXISTING JOISTS, BEAMS, COLUMNS OR OTHER STRUCTURAL ELEMENTS UNLESS DO NOT DRILL OR CUT EXISTING JOISTS, BEAMS, COLUMNS OR OTHER STRUCTURAL ELEMENTS UNLESS SPECIFICALLY NOTED. MAKE OPENINGS OF PROPER SIZE FOR CONDUITS AND PIPING AND OTHER ITEMS PASSING THROUGH OPENINGS. E. REPAIR, PATCH AND FINISH, OR REFINISH AS APPLICABLE, TO MATCH ADJACENT EXISTING FINISHES DAMAGED REPAIR, PATCH AND FINISH, OR REFINISH AS APPLICABLE, TO MATCH ADJACENT EXISTING FINISHES DAMAGED OR NEWLY EXPOSED DURING THE PERFORMANCE OF THE WORK OF THIS CONTRACT. F. WHERE CUTTING OF EXISTING SURFACES OR REMOVAL OF EXISTING FINISHES IS REQUIRED TO PERFORM THE WHERE CUTTING OF EXISTING SURFACES OR REMOVAL OF EXISTING FINISHES IS REQUIRED TO PERFORM THE WORK UNDER THIS CONTRACT, AND A NEW FINISH IS NOT INDICATED, FILL RESULTING OPENINGS AND PATCH THE SURFACE AFTER DOING THE WORK, AND FINISH TO MATCH ADJACENT EXISTING SURFACES.
AutoCAD SHX Text Q. PRIOR TO CUTTING ANY CONC FLOOR SLABS, ULTRASONIC TESTING MUST BE CONDUCTED TO VERIFY THAT NO PRIOR TO CUTTING ANY CONC FLOOR SLABS, ULTRASONIC TESTING MUST BE CONDUCTED TO VERIFY THAT NO ENCASED PIPING EXISTS IN THE AREA TO BE CUT. R. GC TO ISOLATE AREA OF DEMOLITION FROM THE REST OF THE OCCUPIED BUILDING WITH NEW CONSTRUCTION GC TO ISOLATE AREA OF DEMOLITION FROM THE REST OF THE OCCUPIED BUILDING WITH NEW CONSTRUCTION OCCUPIED BUILDING WITH NEW CONSTRUCTION BARRIER WALLS AND EXISTING WALLS. SEE DRAWINGS FOR CONSTRUCTION BARRIER WALL LOCATIONS AND REQUIREMENTS. T. GC MUST MAINTAIN OCCUPIED BUILDING EGRESSING 24 HRS A DAY. GC MUST MAINTAIN OCCUPIED BUILDING EGRESSING 24 HRS A DAY. U. GC TO COORDINATE ALL VA EQUIPMENT TO BE SALVAGED/RELOCATED BY OWNER. GC TO COORDINATE ALL VA EQUIPMENT TO BE SALVAGED/RELOCATED BY OWNER. V. GC TO COORDINATE WITH VA ENGINEERING FOR VA SUPPLIED MECHANICAL, ELECTRICAL AND PLUMBING FOR GC TO COORDINATE WITH VA ENGINEERING FOR VA SUPPLIED MECHANICAL, ELECTRICAL AND PLUMBING FOR ALL APPROPRIATE REMOVALS AND ASSOCIATED NEW WORK.
AutoCAD SHX Text
GENERAL DEMOLITION NOTES
AutoCAD SHX Text G. WHERE CONDUITS, PIPING AND SIMILAR ITEMS ARE SHOWN TO BE INSTALLED IN EXISTING WALLS, NEATLY WHERE CONDUITS, PIPING AND SIMILAR ITEMS ARE SHOWN TO BE INSTALLED IN EXISTING WALLS, NEATLY CHASE THE WALLS TO MAKE THE INSTALLATION NOT ISCERNABLE IN THE FINISHED WORK. H. WORK SHOWN IS NEW UNLESS SPECIFICALLY NOTED OR OTHERWISE INDICATED AS EXISTING. WORK SHOWN IS NEW UNLESS SPECIFICALLY NOTED OR OTHERWISE INDICATED AS EXISTING. J. USE SAW CUTS TO REMOVE MASONRY WHERE REMAINING MASONRY IS TO BE EXPOSED. USE SAW CUTS TO REMOVE MASONRY WHERE REMAINING MASONRY IS TO BE EXPOSED. H. PROVIDE LINTELS OVER EVERY OPENING IN EXISTING MASONRY WALLS AND PARTITIONS. PROVIDE LINTELS OVER EVERY OPENING IN EXISTING MASONRY WALLS AND PARTITIONS. L. WHEN REMOVING EXISTING FLOOR FINISHES, COMPLETELY REMOVE LOOSE MATERIALS AND DAMAGED SUBSTRATE WHEN REMOVING EXISTING FLOOR FINISHES, COMPLETELY REMOVE LOOSE MATERIALS AND DAMAGED SUBSTRATE MATERIALS. M. WHERE "MATCH EXISTING" IS INDICATED, NEW CONSTRUCTION OR FINISHES, AS APPROPRIATE TO THE NOTE, WHERE "MATCH EXISTING" IS INDICATED, NEW CONSTRUCTION OR FINISHES, AS APPROPRIATE TO THE NOTE, SHALL MATCH THE EXISTING IN THE PARTICULAR. N. WHERE "X" PRECEDES A REFERENCE TO A MATERIAL OR PRODUCT (X-WOOD), THE "X" MEANS THAT THE WHERE "X" PRECEDES A REFERENCE TO A MATERIAL OR PRODUCT (X-WOOD), THE "X" MEANS THAT THE INDICATED MATERIAL OR PRODUCT IS EXISTING.
AutoCAD SHX Text
2 HR FIRE RESISTANCE RATED FIRE BARRIER
AutoCAD SHX Text
1 HR FIRE RESISTANCE RATED SMOKE BARRIER
AutoCAD SHX Text
REVISION 1 SCOPE CLARIFICATION
AutoCAD SHX Text
AutoCAD SHX Text
8 JAN 2021
AutoCAD SHX Text
SHAFT
SHAFT
ELEV. 8
ELEV. 7
SHAFT 7 ELEV. 11
Project Number
Building Number
Drawing Number
Project Title
Location
Issue Date Checked Drawn
Drawing Title
Approved:
VA FORM 08 - 6231
A
Fi le
P at h 6/
/2
:3
9:
P M
ISSUE FOR BIDOffice of Construction and Facilities Management
U.S. Department of Veterans Affairs
B
C
D
E
F
A
B
C
D
E
F
21 4 5 6 7 8 9 10
PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT
321 4 5 6 7 8 9 10
Architectural Design Consultant:
Project Director
9 OCT 2020Revisions: Date:
561-CSI-181
386 TREMONT AVENUE, EAST ORANGE, NJ
RELOCATE & RENOVATE ANGIO SUITE
1ST FLOOR
THINKFORM DESIGN ARCHITECT LLC
38 EAST BROAD STREET
HOPEWELL, NJ 08525
T:855.821.0274 F:609.644.4397
MICHAEL AVRAMIDES ARCHITECT
319 E 50TH STREET, STUDIO E
NEW YORK, NY 10022
T:917.855.8111 Approved: Assoc Project Director
Approved: Chief Engineer
Approved: Safety Manager
Approved: NAL
Approved: PCC/Service Director 1-AS101
REFLECTED CEILING PLAN
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text C
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text J
AutoCAD SHX Text K
AutoCAD SHX Text 1-209A
AutoCAD SHX Text
DRESSING
AutoCAD SHX Text 1-220A
AutoCAD SHX Text
HALLWAY
AutoCAD SHX Text
FEC
AutoCAD SHX Text 1-E-107
AutoCAD SHX Text
ELEC.
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text
FEC
AutoCAD SHX Text
FEC
AutoCAD SHX Text 1-213
AutoCAD SHX Text
SUB
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-215
AutoCAD SHX Text
MRI
AutoCAD SHX Text 1-215B
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-215A
AutoCAD SHX Text
DRESSING
AutoCAD SHX Text 1-213A
AutoCAD SHX Text
ELEC
AutoCAD SHX Text 1-214
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-218H
AutoCAD SHX Text
PACS
AutoCAD SHX Text
READING
AutoCAD SHX Text 1-218I
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-218J
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-218K
AutoCAD SHX Text
HCPD
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-218L
AutoCAD SHX Text
GYRO
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-218N
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-218D
AutoCAD SHX Text
EQUIP
AutoCAD SHX Text 1-218C
AutoCAD SHX Text
MRI PREP
AutoCAD SHX Text 1-218F
AutoCAD SHX Text
MRI
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-218E
AutoCAD SHX Text
MRI EXAM
AutoCAD SHX Text 1-212
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-220A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-221A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-210A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-211A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-229A
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-234
AutoCAD SHX Text
HALL
AutoCAD SHX Text 1-231
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-236
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-235
AutoCAD SHX Text
TOILET
AutoCAD SHX Text 1-223
AutoCAD SHX Text
NURSES
AutoCAD SHX Text 1-228
AutoCAD SHX Text
CT
AutoCAD SHX Text 1-228A
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-208
AutoCAD SHX Text
CLEAN
AutoCAD SHX Text 1-226A
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text 1-218M
AutoCAD SHX Text
HALL
AutoCAD SHX Text 1-164
AutoCAD SHX Text
LOCKERS
AutoCAD SHX Text 1-233C
AutoCAD SHX Text
CLOSET
AutoCAD SHX Text 1-210
AutoCAD SHX Text
ULTRASOUND
AutoCAD SHX Text 1-211
AutoCAD SHX Text
ULTRASOUND
AutoCAD SHX Text 1-207
AutoCAD SHX Text
DIRTY
AutoCAD SHX Text 1-206
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text 1-205
AutoCAD SHX Text
READING
AutoCAD SHX Text 1-222
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text 1-209
AutoCAD SHX Text
BONE
AutoCAD SHX Text 1-230
AutoCAD SHX Text
SUB
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-226
AutoCAD SHX Text
CT
AutoCAD SHX Text 1-229
AutoCAD SHX Text
STRETCHER
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-233A
AutoCAD SHX Text
DIGITAL
AutoCAD SHX Text
RADIOGRAPHY 1
AutoCAD SHX Text 1-233B
AutoCAD SHX Text
DIGITAL
AutoCAD SHX Text
RADIOGRAPHY 2
AutoCAD SHX Text 1-220
AutoCAD SHX Text R / F
AutoCAD SHX Text 1-221
AutoCAD SHX Text R / F
AutoCAD SHX Text 1-164A
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-164B
AutoCAD SHX Text
DRESS
AutoCAD SHX Text 1-227E
AutoCAD SHX Text
SCRUBS
AutoCAD SHX Text 1-167
AutoCAD SHX Text
MENS
AutoCAD SHX Text 1-168
AutoCAD SHX Text
DUMB
AutoCAD SHX Text
WAITER
AutoCAD SHX Text 1-168A
AutoCAD SHX Text
IRM CLOS
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-6"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text
IR/ANGIO
AutoCAD SHX Text 1-227
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text
ROOM
AutoCAD SHX Text 1-227C
AutoCAD SHX Text
EQUIP
AutoCAD SHX Text 1-227B
AutoCAD SHX Text
IR PREP
AutoCAD SHX Text 1-227A
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-203
AutoCAD SHX Text 9'-6"
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text 1-242C
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text 1-242B
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text 1-242A
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text 1-241
AutoCAD SHX Text
IT
AutoCAD SHX Text 1-203A
AutoCAD SHX Text
ADMIN
AutoCAD SHX Text
ASST
AutoCAD SHX Text 1-242
AutoCAD SHX Text
SEE SHEET AS203 FOR ENLARGED PLAN
AutoCAD SHX Text W
AutoCAD SHX Text SPRINKLER HEAD - REFER TO FIRE PROTECTION DRAWINGS & SPECS DIFFUSERS - REFER TO MECHANICAL DRAWINGS & SPECS 2x2 LED LIGHT FIXTURE PENDANT MOUNTED FIXTURE
AutoCAD SHX Text
RCP SYMBOLS KEY
AutoCAD SHX Text
RCP MATERIAL KEY
AutoCAD SHX Text 2x2 SUSPENDED CEILING GYP BD/PLASTER CEILING - PTD DECORATIVE CEILING PANEL
AutoCAD SHX Text
NOTE: REFER TO ELECTRICAL DRAWINGS AND SPECS FOR ALL FIXTURES
AutoCAD SHX Text LED DOWNLIGHT FIXTURE WALL MOUNTED LED VANITY FIXTURE EXIT SIGN : WALL MOUNTED EXIT SIGN : SEMI-RECESSED WALL MOUNTED EXIT SIGN : CEILING MOUNTED ROUTER (EXISTING TO BE SALVAGED & RE-INSTALLED) SPEAKER (EXISTING TO BE SALVAGED & RE-INSTALLED)
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
LEGEND
AutoCAD SHX Text
AREA OF WORK
AutoCAD SHX Text
KEY MAP
AutoCAD SHX Text
REFLECTED CLG PLAN - 1ST FLOOR (C-WING)
AutoCAD SHX Text
AutoCAD SHX Text
AS101
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text N
AutoCAD SHX Text
REVISION 1 SCOPE CLARIFICATION
AutoCAD SHX Text
AutoCAD SHX Text
8 JAN 2021
1-AS203
WAITING ROOM - ENLARGED
PLANS + ELEVATIONS
Project Number
Building Number
Drawing Number
Project Title
Location
Issue Date Checked Drawn
Drawing Title
Approved:
VA FORM 08 - 6231
A
Fi le
P at h 6/
/2
:3
9:
P M
ISSUE FOR BIDOffice of Construction and Facilities Management
U.S. Department of Veterans Affairs
B
C
D
E
F
A
B
C
D
E
F
21 4 5 6 7 8 9 10
PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT
321 4 5 6 7 8 9 10
Architectural Design Consultant:
Project Director
9 OCT 2020Revisions: Date:
561-CSI-181
386 TREMONT AVENUE, EAST ORANGE, NJ
RELOCATE & RENOVATE ANGIO SUITE
1ST FLOOR
THINKFORM DESIGN ARCHITECT LLC
38 EAST BROAD STREET
HOPEWELL, NJ 08525
T:855.821.0274 F:609.644.4397
MICHAEL AVRAMIDES ARCHITECT
319 E 50TH STREET, STUDIO E
NEW YORK, NY 10022
T:917.855.8111 Approved: Assoc Project Director
Approved: Chief Engineer
Approved: Safety Manager
Approved: NAL
Approved: PCC/Service Director
AutoCAD SHX Text
AS201
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1-203
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-203A
AutoCAD SHX Text
RECEPTION
AutoCAD SHX Text 1-203B
AutoCAD SHX Text
IT
AutoCAD SHX Text 1-231A
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
AS203
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CLASS A WAINSCOT - SEE FIN SCHED
AutoCAD SHX Text
RECEPTION DESK - SEE MILLWORK DETAILS
AutoCAD SHX Text 6'W x 5'H OVERHEAD COILING GRILLE
AutoCAD SHX Text
AS201
AutoCAD SHX Text
AutoCAD SHX Text
2"DIA ROUNDED COUNTER CORNER
AutoCAD SHX Text
2"DIA GROMMET, TYP
AutoCAD SHX Text C
AutoCAD SHX Text L
AutoCAD SHX Text TILE-2 (T-2) ARMSTRONG 12"x24" STRIATIONS, HONEY (T3615)
AutoCAD SHX Text 1-203A
AutoCAD SHX Text
RECEPTION
AutoCAD SHX Text 1-203B
AutoCAD SHX Text
IT
AutoCAD SHX Text 1-231A
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text C
AutoCAD SHX Text L
AutoCAD SHX Text 1-203
AutoCAD SHX Text
WAITING
AutoCAD SHX Text TILE-1 (T-1) ARMSTRONG 12"x24" STRIATIONS, TEA TIME (T3616)
AutoCAD SHX Text
SVT-1 ARMSTRONG MEDINTONE H5358 SOFT GREEN LIGHT
AutoCAD SHX Text
CENTER OF ELLIPSE
AutoCAD SHX Text
MATCH & ALIGN FLOOR PATTERN W/ ADJACENT EXISTING CORRIDOR
AutoCAD SHX Text
EXIST TO REMAIN
AutoCAD SHX Text
EXIST TO REMAIN
AutoCAD SHX Text 9'-6"
AutoCAD SHX Text 9'-6"
AutoCAD SHX Text C
AutoCAD SHX Text L
AutoCAD SHX Text C
AutoCAD SHX Text L
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-6"
AutoCAD SHX Text 1-203
AutoCAD SHX Text
WAITING
AutoCAD SHX Text 1-203A
AutoCAD SHX Text
RECEPTION
AutoCAD SHX Text 1-203B
AutoCAD SHX Text
IT
AutoCAD SHX Text 1-231A
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
MAIN AXIS
AutoCAD SHX Text
MATCH & ALIGN NEW CEILING PANELS W/ ADJACENT EXISTING CORRIDOR
AutoCAD SHX Text
EXIST TO REMAIN
AutoCAD SHX Text
EXIST TO REMAIN
AutoCAD SHX Text J
AutoCAD SHX Text K
AutoCAD SHX Text
4" RUBBER BASE
AutoCAD SHX Text
PENDANT LIGHTING
AutoCAD SHX Text
WALL PROTECTION, HEIGHT TO MATCH EXISTING
AutoCAD SHX Text
GYP BD PTD
AutoCAD SHX Text
AutoCAD SHX Text
PENDANT LIGHTING
AutoCAD SHX Text
4" RUBBER BASE
AutoCAD SHX Text
WALL PROTECTION, HEIGHT TO MATCH EXISTING
AutoCAD SHX Text
GYP BD PTD
AutoCAD SHX Text J
AutoCAD SHX Text K
AutoCAD SHX Text
4" RUBBER BASE
AutoCAD SHX Text
WALL PROTECTION, HEIGHT TO MATCH EXISTING
AutoCAD SHX Text
PENDANT LIGHTING
AutoCAD SHX Text
GYP BD PTD
AutoCAD SHX Text
AutoCAD SHX Text
4" RUBBER BASE
AutoCAD SHX Text
PENDANT LIGHTING
AutoCAD SHX Text
WALL PROTECTION, HEIGHT TO MATCH EXISTING
AutoCAD SHX Text
GYP BD PTD
AutoCAD SHX Text
OVERHEAD COILING GRILLE HOUSING
AutoCAD SHX Text
OVERHEAD COILING GRILLE
AutoCAD SHX Text
RECEPTION DESK - SEE MILLWORK DWG'S
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
WAITING (1-203) - ENLARGED PLAN
AutoCAD SHX Text
AutoCAD SHX Text
AS203
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
FLOOR FINISH PATTERN
AutoCAD SHX Text
AutoCAD SHX Text
AS203
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
REFLECTED CEILING PLAN
AutoCAD SHX Text
AutoCAD SHX Text
AS203
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
ELEVATIONS
AutoCAD SHX Text
AutoCAD SHX Text
AS203
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
ELEVATIONS
AutoCAD SHX Text
AutoCAD SHX Text
AS203
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
ELEVATIONS
AutoCAD SHX Text
AutoCAD SHX Text
AS203
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
ELEVATIONS
AutoCAD SHX Text
AutoCAD SHX Text
AS203
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
REFER TO DRAWING AS301 FOR FINISH SCHEDULE AND MATERIAL DESCRIPTIONS.
AutoCAD SHX Text
GENERAL NOTE
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
AS203
AutoCAD SHX Text
AutoCAD SHX Text
COUNTER SECTION
AutoCAD SHX Text
REVISION 1 SCOPE CLARIFICATION
AutoCAD SHX Text
AutoCAD SHX Text
8 JAN 2021
AutoCAD SHX Text
| 1-AA100 REV1 |
| Sheets and Views |
| AD100 |
| 1-AD100 REV1 |
| Sheets and Views |
| AD100 |
| 1-AS101 REV1 |
| Sheets and Views |
| AS101 |
| 1-AS203 REV1 |
| Sheets and Views |
| AS203 |
File details come from the government source that posted it. Updated .