240625 1130915 127EAV24Q0070 Santa Fe Carson NF Gate Fabrication.pdf

Project Title: FY24 Gate Fabrication Contract Santa Fe and Carson National Forests

This is a combined synopsis/solicitation for commercial products prepared in accordance with the format prescribed in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation quotes are being requested and a written solicitation will not be issued. Solicitation 127EAV24Q0070 is issued as a request for quote (RFQ). This procurement is being issued as a 100% SMALL BUSINESS SET-ASIDE. The Santa Fe and Carson National Forests are seeking to purchase newly fabricated forest road gates. The applicable NAICS is 332312 Fabricated Structural Metal Manufacturing, for which the small business size standard in employees is 500 (PSC: 5450 MISCELLANEOUS PREFABRICATED STRUCTURES). This solicitation document incorporates provisions and clauses of those in effect through Federal Acquisition Regulation Circular 2024-05 dated May 22, 2024. The result of this requirement will be a Firm Fixed Priced (FFP) contract. The right to make multiple or no award is reserved in the event it is advantageous to the Government to do

so. The contractor shall provide pricing in accordance with the Schedule of Items attached.

Description: The (Contractor) shall provide Twenty-four (24) single-arm gates and ten (10) double-arm gates shall be fabricated in compliance with the attached SOW. All single-arm gates shall be sixteen (16) feet in length and all double-arm gates shall be thirty-two (32) feet in length with each arm of all double-arm gates being sixteen (16) feet in length. Gates fabricated in compliance with this contract shall be consistent with all attached drawings and specifications including those shown in Figures 1 and 2 in accordance with the attached SOW.

If the location of the finished gates is within one hundred (100) miles of either project location, delivery of the gates shall be excluded from this contract. If gate delivery is required by this contract, ten (10) single-arm gates and five (5) double-arm gates shall be delivered to the Santa Fe National Forest Administrative Site and fourteen (14) single-arm gates and five (5) double-arm gates shall be delivered to the Carson National Forest Administrative Site.

Additionally, forty-four (44) separate locking posts shall be fabricated to accompany each gate arm. Locking posts shall be eight (8) feet in height and shall be delivered to the same locations as the individual gate arms if gate delivery is required by this contract.

1. Questions and Answers. All questions regarding this solicitation must be submitted no later than 1700 Mountain time on July 8, 2024. Questions will only be accepted via email. Emails should be addressed to the attention of the Contract Specialist Shavera Leveille at shavera.leveille@usda.gov. Answers will be posted to SAM.gov by 1700 Mountain Time on July 10, 2024.

2. Deadline for Response: 1700 Mountain Time on July 16, 2024, or sooner.

3. Period of Performance: August 15, 2024-October 14, 2024.

4. Basis for Award: Offers will be reviewed for conformance to the requirements of this RFQ.

Award will be made based on the Lowest Price Technically Acceptable (LPTA) offer that meets or exceeds the acceptability standards for technical factors listed in section M.

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

7EAV

ALBUQUERQUE NM 87102-3498

333 BROADWAY BLVD SE

USDA-FS CSA SOUTHWEST 5

83A7 CODE 16. ADMINISTERED BYCODE

X

X

X

332312

SIZE STANDARD:

% FOR:SET ASIDE:UNRESTRICTED OR7EAV

REQUEST FOR

PROPOSAL

(RFP)

INVITATION

FOR BID (IFB)

10. THIS ACQUISITION ISCODE

REQUEST FOR

QUOTE (RFQ)

14. METHOD OF SOLICITATION

13b. RATING

NORTH AMERICAN INDUSTRY

CLASSIFICATION STANDARD

(NAICS):

SMALL BUSINESS

07/02/2024

912-463-3328SHAVERA LEVEILLE

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIME

07/16/2024 1700 MT

b. TELEPHONE NUMBERa. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

127EAV24Q0070

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 4 1130915OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

See Schedule

15. DELIVER TO

ALBUQUERQUE NM 87102-3498

333 BROADWAY BLVD SE

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FREE ON BOARD

(FOB) DESTINATION UNLESS

BLOCK IS MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS THIS CONTRACT IS A RATED

ORDER UNDER THE DEFENSE

PRIORITIES AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

8(A)

USDA-FS CSA SOUTHWEST 5

WOMEN-OWNED SMALL

BUSINESS (WOSB)

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

DELIVER TO:

USDA FOREST SERVICE

CARSON NATIONAL FOREST

SUPERVISOR OFFICE

208 CRUZ ALTA RD

TAOS NM 87571 US

Project Title: FY24 Gate Fabrication Contract Santa Fe and Carson NFs

Please send all quotes by email only to shavera.leveille@usda.gov. Quotes must be

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

X

DATED

DAVID L. WATSON

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Government Use Only)

OFFER

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT: REFERENCE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 11/2021) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

received on or before 1700 Mountain Time on July

16, 2024. If you have questions regarding this requirement, please email the questions to shavera.leveille@usda.gov no later than 1700

Mountain Time on July 8, 2024. All answers will be posted to SAM.gov on July 10, 2024, and any questions submitted after this date will not be accepted. This procurement is being issued as a

100% SMALL BUSINESS SET-ASIDE. The result of this requirement will be a Firm Fixed Priced (FFP) contract. The right to make multiple or no award is reserved in the event it is advantageous to the Government to do so. The contractor shall provide pricing in accordance with the attached

Schedule of Items.

Note: Please include all applicable taxes in your quote. Contractor must be registered/active in

SAM.gov on RFQ due date/time.

Description: The (Contractor) shall provide

Twenty-four (24) single-arm gates and ten (10) double-arm gates shall be fabricated for compliance with this contract. All single-arm gates shall be sixteen (16) feet in length and all double-arm gates shall be thirty-two (32) feet in length with each arm of all double-arm gates being sixteen (16) feet in length. Gates fabricated in compliance with this contract shall

Continued ...

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

4 2 of

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 4

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

127EAV24Q0070

be consistent with all attached drawings and specifications including those shown in Figures 1 and 2 in accordance with the attached SOW.

If the location of the finished gates is within one hundred (100) miles of either project location, delivery of the gates shall be excluded from this contract. If gate delivery is required by this contract, ten (10) single-arm gates and five (5) double-arm gates shall be delivered to the Santa Fe National Forest Administrative Site and fourteen (14) single-arm gates and five (5) double-arm gates shall be delivered to the Carson

National Forest Administrative Site. The coordinates of the Santa Fe Administrative Site are 35.655086 N, -105.979584 W and the coordinates of the Carson Administrative Site are

36.397504 N, -105.554554 W.

Additionally, forty-four (44) separate locking posts shall be fabricated to accompany each gate arm. Locking posts shall be eight (8) feet in height and shall be delivered to the same locations as the individual gate arms if gate delivery is required by this contract.

The "Submit Invoice-to address for USDA orders is the Department of Treasury's Invoice Processing

Platform (IPP). The contractor must follow the instructions on how to register and submit invoices via IPP as prescribed in the previous communications from USDA and Treasury. All invoices are to be submitted via the electronic

Invoice Processing Platform. This is a mandatory requirement initiated by the U.S. Department of

Treasury and you can find more information at this website https://www.ipp.gov/index.htm.

Please make sure that your company has registered at https://www.ipp.gov/vendors/enrollment-vendo rs.htm to establish your account.

Delivery: 09/15/2024

Period of Performance: 08/15/2024 to 10/14/2024

FY24 Gate Fabrication for Installation on Forest

Roads Santa Fe and Carson National Forests

Single-Arm Gate Fabrication 24 Each

Double-Arm Gate Fabrication 10 Each

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

4 4

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

127EAV24Q0070

Gate Locking Posts 44 Each

Gate Delivery 44 Each if required IAW SOW Product/Service Code: 5450

Product/Service Description: MISCELLANEOUS

PREFABRICATED STRUCTURES

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

SECTION B: Supplies or services and prices/costs

SCHEDULE OF ITEMS

Project Title: FY 2024 Gate Fabrication Contract Santa Fe and Carson National Forests

ITEM NO 0001 QUANTITY METHOD OF

MEASUREMENT UNIT UNIT PRICE TOTAL PRICE

Single-Arm Gate Fabrication 24 AQ each

Double-Arm Gate Fabrication 10 AQ each

Gate Locking Posts 44 AQ each

Gate Delivery 44 AQ each

***QUOTE MUST INCLUDE ALL APPLICABLE TAXES***

Contractor Name & SAM UEI#:______________________________________

Contractor Authorized Signature:____________________________________

Total $

Section C: Statement of Work

2024 Gate Fabrication Contract

Santa Fe and Carson National Forests

Description of Work

The Santa Fe and Carson National Forests are seeking to purchase newly fabricated forest road gates during Fiscal Year 2024. If the location of the finished gates is greater than one hundred (100) miles from both project locations as described in the following section (the Santa Fe National Forest administrative site in Santa Fe, New Mexico and the Carson National Forest administrative site outside of Taos, New Mexico), the gates shall be delivered to the two project locations as described below. If the location of the finished gates is within one hundred (100) miles of either project location, delivery of the gates shall be excluded from this contract.

Twenty-four (24) single-arm gates and ten (10) double-arm gates shall be fabricated for compliance with this contract. All single-arm gates shall be sixteen (16) feet in length and all double-arm gates shall be thirty-two (32) feet in length with each arm of all double-arm gates being sixteen (16) feet in length.

Gates fabricated in compliance with this contract shall be consistent with all attached drawings and specifications including those shown in Figures 1 and 2 on the following page.

If gate delivery is required by this contract, ten (10) single-arm gates and five (5) double-arm gates shall be delivered to the Santa Fe National Forest administrative site and fourteen (14) single-arm gates and five (5) double-arm gates shall be delivered to the Carson National Forest administrative site.

Additionally, forty-four (44) separate locking posts shall be fabricated to accompany each gate arm.

Locking posts shall be eight (8) feet in height and shall be delivered to the same locations as the individual gate arms if gate delivery is required by this contract.

Figure 1. Profile View of Single-Arm Gate

Figure 2. Profile View of Double-Arm Gate

Project Location

The project is located on National Forest land within Santa Fe, New Mexico and outside of Taos, New Mexico. The coordinates of the Santa Fe administrative site are 35.655086 N, -105.979584 W and the coordinates of the Carson administrative site are 36.397504 N, -105.554554 W.

Directions to Santa Fe National Forest administrative site from the Santa Fe NF Supervisor’s Office:

Head north on NM-14 (Cerrillos Rd) for 6.5 miles. Turn right onto Camino Carlos Rey for 0.2 miles. Turn left at the first opportunity onto an access road for 0.2 miles. Turn right at the end of the access road for

0.1 miles until reaching the site.

Directions to Carson National Forest administrative site from the Carson NF Supervisor’s Office:

Head east on Cruz Alta Rd for 1.2 miles. Turn left onto NM-585 for 0.7 miles. Turn left onto US-64 for 0.7 miles. Turn right onto Piedmont Rd for 1.0 miles until reaching the site on the right.

Measurement and Payment

Measurement for all work done on this project shall be outlined in the attached Schedule of Items

(SOI).

Contractor shall provide all equipment, supplies, superintendence, materials, and labor necessary to complete the work in accordance with all attached drawings and specifications.

All invoices shall be processed through IPP.

The Period of Performance is from August 15, 2024 through October 14, 2024.

Work is estimated to begin on August 15, 2024.

Section D-Packaging and Marking {For this Solicitation there are NO clauses in this section}

Section E-Inspection and Acceptance

52.246-4 Inspection of Services - Fixed-Price. (Aug 1996)

(a) Definition."Services," as used in this clause, includes services performed, workmanship, and material furnished or utilized in the performance of services.

(b) The Contractor shall provide and maintain an inspection system acceptable to the Government covering the services under this contract. Complete records of all inspection work performed by the Contractor shall be maintained and made available to the Government during contract performance and for as long afterwards as the contract requires.

(c) The Government has the right to inspect and test all services called for by the contract, to the extent practicable at all times and places during the term of the contract. The Government shall perform inspections and tests in a manner that will not unduly delay the work.

(d) If the Government performs inspections or tests on the premises of the Contractor or a subcontractor, the Contractor shall furnish, and shall require subcontractors to furnish, at no increase in contract price, all reasonable facilities and assistance for the safe and convenient performance of these duties.

(e) If any of the services do not conform with contract requirements, the Government may require the Contractor to perform the services again in conformity with contract requirements, at no increase in contract amount. When the defects in services cannot be corrected by reperformance, the Government may-

(1) Require the Contractor to take necessary action to ensure that future performance conforms to contract requirements; and

(2) Reduce the contract price to reflect the reduced value of the services performed.

(f) If the Contractor fails to promptly perform the services again or to take the necessary action to ensure future performance in conformity with contract requirements, the Government may-

(1) By contract or otherwise, perform the services and charge to the Contractor any cost incurred by the Government that is directly related to the performance of such service; or

(2) Terminate the contract for default.

(End of clause)

452.246-70 Inspection and Acceptance (Feb 1988)

(a) The Contracting Officer or the Contracting Officer's duly authorized representative will inspect and accept the supplies and/or services to be provided under this contract.

(b) The COR or a designated inspector will make periodic inspections as work progresses. The contractor may observe the inspection while it is being made.

(c) Acceptance of the work will be determined by 100% visual inspection and will be based on adherence to the specifications.

(d) Non-conformance with any of the specifications will classify the work as unsatisfactory and rework may be required to bring the work up to standard. (End of clause)

(End of clause)

Section F-Deliveries and Performance

AGAR 452.211-74 Period of Performance (FEB 1998)

The period of performance is from (estimated) 8/15/2024 to 10/14/2024.

Section G-Contract Administration

AGAR 452.215-73 Post Award Conference (NOV 1996) A post award conference with the successful offeror is required. It will be scheduled at a mutually agreed upon time and date. The conference will be held VIA Teleconference with the Contracting Officer, the COR, and the successful offeror.

G-1 Designation of Contracting Officer’s Representative The Contracting Officer upon award will designate in writing a Contracting Officer’s Representative (COR).

The COR is responsible for administering the performance of work under this contract. In no event, however, will any understanding, agreement, modification, change order, or other matter deviating from the terms of this contract is effective or binding upon the Government unless formalized by proper contractual documents executed by the Contracting Officer prior to completion of the contract.

The Contracting Officer should be informed as soon as possible of any actions or inactions by the Contractor or the Government, which will change the required delivery or completion times stated in the contract, and the contract will be modified accordingly. (This does not apply to individual task assignments which were issued by the COR provided they do not affect the delivery schedule or performance period stated in the contract.)

On all matters that pertain to the contract terms the Contractor shall communicate with the Contracting Officer.

Whenever, in the opinion of the Contractor, the COR requests effort outside the scope of the contract, the Contractor should so advise the COR. If the COR persists and there still exists a disagreement as to proper contractual coverage, the Contracting Officer should be notified immediately, preferably in writing if time permits. Proceeding with work without proper contractual coverage could result in nonpayment or necessitate submittal of a contract claim.

G-2 Notification of Subcontracting The Contractor shall promptly the Contracting Officer upon entering any subcontract arrangement. The notification shall include as a minimum:

1. The name, address, and telephone number of the subcontractor.

2. The date upon which the subcontract was entered into and its duration.

3. A detailed description of the work being subcontracted including a listing of contract items, units, etc., as appropriate.

G-3 Use of Premises The Contractor shall comply with the regulations governing the operation of premises which are occupied and shall perform the contract in such a manner as not to interrupt or interfere with the conduct of Government business.

G-4 Public Officials not Personally Liable There shall be no personal liability upon the Contracting Officer or officer in charge, their agents or employees, for any act performed in the discharge of any duty imposed or the exercise of any power or authority conferred upon them, by, or within the scope of the contract, it being understood that in all such matters they act solely as agents and representatives of the Government.

G-5 Basis for Payment Payment will be made for all work satisfactorily inspected and accepted at the unit prices listed on the Schedule of Items.

Section H-Special Contract Requirements {For this Solicitation there are NO clauses in this section}

PART II CONTRACT CLAUSES

Section I Contract Clauses 52.202-1 Definitions- Definitions (Jun 2020) 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights. (Nov 2023) 52.211-6 Brand Name or Equal (Aug 1999) Provision 52.212-1 Instructions to Offerors - Commercial Items. (Sep 2023) Provision 52.212-4 Contract Terms and Conditions - Commercial Items. (Nov 2023) 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran- Representation and Certifications. (Jun 2020) 52.232-39 Unenforceability of Unauthorized Obligations. (Jun 2013) 52.233-3 Protest after Award. (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim. (Oct 2004) 52.242-15 Stop-Work Order. (Aug 1989) 52.242-17 Government Delay of Work. (Apr 1984) 52.244-6 Subcontracts for Commercial Items. (Dec 2023) 52.245-1 Government Property. (Sep 2021) 52.249-1 -- Termination for Convenience of the Government (Fixed-Price) (Short Form) (Apr 1984) 52.249-2-Termination for Convenience of the Government (Fixed-Price) (Apr 2012) 52.249-8 -- Default (Fixed-Price Supply and Service) (Apr 1984) 452.204-70 Inquiries. (FEB 1988)

52.204-3 Taxpayer Identification. (OCT 1998)

(a) Definitions.

Common parent, as used in this provision, means that corporate entity that owns or controls an affiliated group of corporations that files its Federal income tax returns on a consolidated basis, and of which the offeror is a member.

Taxpayer Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service (IRS) to be used by the offeror in reporting income tax and other returns. The TIN may be either a Social Security Number or an Employer Identification Number.

(b) All offerors must submit the information required in paragraphs (d) through (f) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the IRS. If the resulting contract is subject to the payment reporting requirements described in Federal Acquisition Regulation (FAR) 4.904, the failure or refusal by the offeror to furnish the information may result in a 31 percent reduction of payments otherwise due under the contract.

(c) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.

(d) Taxpayer Identification Number (TIN).

[XX] TIN: _____________________.

[] TIN has been applied for.

[] TIN is not required because:

[] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;

[] Offeror is an agency or instrumentality of a foreign government;

[] Offeror is an agency or instrumentality of the Federal Government.

(e) Type of organization.

[] Sole proprietorship;

[] Partnership;

[] Corporate entity (not tax-exempt);

[] Corporate entity (tax-exempt);

[] Government entity (Federal, State, or local);

[] Foreign government;

[] International organization per 26 CFR 1.6049-4;

[] Other _________________________.

(f) Common parent.

[] Offeror is not owned or controlled by a common parent as defined in paragraph (a) of this provision.

[] Name and TIN of common parent:

Name _____________________________

TIN ______________________________

(End of provision)

52.212-2 Evaluation—Commercial Products and Commercial Services. (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Award will be made based on Lowest Price Technically Acceptable (LPTA).

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-3 Offeror Representations and Certifications-Commercial Items. (Nov 2023) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision—

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition https://www.sam.gov/ https://www.acquisition.gov/far/part-52#FAR_52_204_25 on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

https://www.ecfr.gov/current/title-13/part-127 https://www.ecfr.gov/current/title-13/section-127.300 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title6-section395&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title6-section395&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_204_25

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"— Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veteransor, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16).

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13

CFR 121.103.

Small disadvantaged business concern, consistent with13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that—

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by—

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section101&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section101&num=0&edition=prelim https://www.ecfr.gov/current/title-13/part-121

Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women Women-owned small business concern means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13

CFR 127.300.

(b)

(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs __.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that—

(i) It □ is, □ is not a small business concern; or

(ii) It □ is, □ is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.]

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [ Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that—

(i) It □ is, □ is not a service-disabled veteran-owned small business concern; or (ii)It □ is, □ is not a joint venture that complies with the requirements of 13 CFR 125.18(b)(1) and (2).

[The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.] Each service-disabled veteran-owned small business concern participating in the joint venture shall provide representation of its service-disabled veteran-owned small business concern status.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it □ is, □ is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a women-owned small business concern.

(6) WOSB joint venture eligible under the WOSB Program. The offeror represents that it □ is, □ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.] https://www.ecfr.gov/current/title-13/part-127 https://www.ecfr.gov/current/title-13/part-127 https://www.ecfr.gov/current/title-13/section-127.300 https://www.ecfr.gov/current/title-13/section-127.300 http://www.sam.gov/ https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.acquisition.gov/far/part-4#FAR_4_1201 https://www.acquisition.gov/far/part-19#FAR_Part_19 https://www.acquisition.gov/far/part-19#FAR_19_000 https://www.ecfr.gov/current/title-13/section-121.103#p-121.103(h) https://www.ecfr.gov/current/title-13/section-125.8#p-125.8(a) https://www.ecfr.gov/current/title-13/section-125.8#p-125.8(a) https://www.ecfr.gov/current/title-13/section-125.8#p-125.8(b) https://www.ecfr.gov/current/title-13/section-125.18#p-125.18(b)(1) https://www.ecfr.gov/current/title-13/section-125.18#p-125.18(b)(2) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(a) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(c)

(7) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it □ is, □ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c).

[ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.]

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that–

(i) It □ is, □ is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see 13 CFR 126.200(e)(1)); and

(ii) It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c).

[ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ______.] Each HUBZone small business concern participating in the HUBZone joint venture shall provide representation of its HUBZone status.

(d) Representations required to implement provisions of Executive Order11246-

(1) Previous contracts and compliance. The offeror represents that-

(i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It □ has, □ has not filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that-

(i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60- 2), or

(ii) It □ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 http://uscode.house.gov/ U.S.C. 1352).

(Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.)

(1)

(i) The Offeror certifies that each end product and that each domestic end product listed in paragraph (f)(3) of this provision contains a critical component, except those listed in paragraph (f)(2) of this provision, is a domestic end product.

(ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(iii) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(a) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(c) https://www.ecfr.gov/current/title-13/section-126.200 https://www.ecfr.gov/current/title-13/section-126.616#p-126.616(a) https://www.ecfr.gov/current/title-13/section-126.616#p-126.616(c) http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_225_1

(iv) The terms “commercially available off-the-shelf (COTS) item,” “critical component,” “domestic end product,” "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(2) Foreign End Products:

[List as necessary] 1.

2.

3.

(3) Domestic end products containing a critical component:

Line Item No. ___ [List as necessary]

(4) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(g)

(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225- 3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.)

(i)

(A) The Offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (iii) of this provision, is a domestic end product and that each domestic end product listed in paragraph (g)(1)(iv) of this provision contains a critical component.

(B) The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

[List as necessary] 1.

2.

3.

(iii) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The Offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

Other Foreign End Products:

[List as necessary]

(iv) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see

FAR 25.105).

Line Item No. ___ [List as necessary] 1.

2.

3.

(v) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II.