2-LAVTA New Streetlights on Railroad Ave - Plans.pdf
PDF 5 MB Posted
- Attached to
- New Streetlights on Railroad Avenue
- Solicitation number
- 2026-01
- Issued by
- Alameda County, California
About this file
This is a construction plans document for the Livermore Amador Valley Transit Authority (LAVTA) and the City of Livermore regarding the installation of new decorative streetlighting along the Railroad Avenue cul-de-sac in Livermore, California, between approximately 2598 and 2456 Railroad Avenue. The project scope encompasses the removal and salvaging of an existing streetlight luminaire for City reuse or storage, installation of complete new streetlight systems including decorative poles, concrete foundations, anchor bolts, LED luminaires, conductors, grounding systems, fuses, conduit, and pull boxes. The work also includes civil improvements such as installation and restoration of concrete sidewalks, asphalt pavement, and grout, as well as potholing investigations to verify existing underground utility locations. Contractors must coordinate with both the City of Livermore and LAVTA to minimize disruption to surrounding infrastructure and transit operations, and must complete all electrical service connections, testing, and inspections in compliance with applicable codes and standards.
The project documentation does not specify response dates, due dates, site visit requirements, or bidders' conferences in the provided file. No pricing terms, set-asides, incumbent contractor information, funding sources, or contract award amounts are detailed in this plans document. The contractor will be responsible for connecting to existing electrical infrastructure, including pull boxes, and realigning and reconnecting existing conduit systems as necessary to accommodate the new improvements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 3-IFB 2026-01 New Streetlights on Railroad Ave.pdf | ||
| 1-Attachment A - Technical Specifications.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CV-01
LIVERMORE AMADOR VALLEY TRANSIT AUTHORITY
NEW STREETLIGHTS ON RAILROAD AVENUE
p p p p p p o o o o p p p p p p
COVER SHEET
LAVTA IFB NO. 2026-01
TO BE SUPPLEMENTED BY STATE STANDARD PLANS DATED 2025
AND CITY OF LIVERMORE STANDARD DETAILS
FEDERAL GRANT NO. CA-2021-011-00
Docusign Envelope ID: C56D973C-579F-4F27-80E8-023922698442
3/11/2026 3/11/2026
GN-01 2
GENERAL NOTES
4' MINIMUM
10' SIDEW
ALK
LT-01
M A
P L E
S T R
E E
T
RAILROAD AVENUE
NORTH
LIGHTING PLAN
EXISTING STREETLIGHT I.D. 6889
FURNISH AND INSTALL DECORATIVE STREETLIGHT PER CITY OF
LIVERMORE STANDARD DWG ST-14C. SEE SHEET DT-01 FOR MORE
DETAILS.
FURNISH AND INSTALL 2"C HDPE CONDUIT AND 2#14 (120 V LIGHTING)
AND 1#8 GROUND. INSTALLATION SHALL BE COMPLETED BY
DIRECTIONAL DRILLING.
SPLICE NEW CONDUCTORS WITH EXISTING CONDUCTORS IN EXISTING
PULL BOX.
REMOVE EXISTING STREETLIGHT POLE, LUMINAIRE ARM, AND
BASEPLATE. EXISTING FOUNDATION AND ANCHOR BOLTS TO REMAIN.
TRIM EXISTING TREE PRIOR TO INSTALLING DECORATIVE STREETLIGHT.
SEE SPECIFICATIONS FOR ADDITIONAL REQUIREMENTS FOR TREE
TRIMMING.
THE DECORATIVE STREETLIGHT SHALL NOT BE INSTALLED CLOSER
THAN 4' FROM A DRIVEWAY FLARE EDGE.
FURNISH AND INSTALL DECORATIVE STREETLIGHT ON EXISTING
FOUNDATION. SEE SHEET DT-02 FOR MORE DETAILS.
FURNISH AND INSTALL 2#14 (120 V LIGHTING) AND 1#8 GROUND IN
EXISTING CONDUIT.
DT-01
DETAILS
DECORATIVE STREETLIGHT DETAIL PULL BOX LOCATION DETAIL SIDEWALK REPAIR DETAIL
DT-02
DETAILS
BASEPLATE DETAIL (ON EXISTING FOUNDATION)
PROPOSED DECORATIVE STREET LIGHT POLE BASEPLATE
EXISTING ANCHOR BOLT. EXISTING
NUTS TO BE USED (TYP.)
±10.7"
.7
5"
12.75"
±7.5"
±7 .6
| Sheets and Views |
| 1 CV-01 |
| 2 GN-01 |
| 3 LT-01 |
| 4 DT-01 |
| 5 DT-02 |
File details come from the government source that posted it. Updated .