1431362-event.pdf

24 September 2026

Lead Service Lines Technical Assistance Lead Service Lines Technical Assistance

24 September 2026

Open 9/21/2026, 4:00 PM EDT Type Request for Proposal Close 10/21/2026, 9:00 AM EDT Number DEP-RFP006735 Currency US Dollar

Sealed Until 10/21/2026, 9:00 AM EDT

Contacts Brady Fries bfries@pa.gov

Commodity Codes Commodity Code Description 77100000 Environmental management

24 September 202624 September 202624 September 202624 September 202624 September 202624 September 202624 September 202624 September 202624 September 2026 mailto:bfries@pa.gov

Description

1. Purpose. This request for proposals (RFP) provides information to enable potential Offerors to prepare and submit proposals for the Commonwealth of Pennsylvania's consideration.

2. Determination to use Competitive Sealed Proposal Method. The Commonwealth, through the issuing office, has determined that the competitive sealed proposals process is the most practical and advantageous method for awarding contracts to obtain the best value for the Commonwealth.

3. Issuing Office. The Department of Environmental Protection (“Issuing Office”) has issued this RFP on behalf of the Commonwealth. The sole point of contact in the Commonwealth for this RFP shall be the Contact listed above, who is the Issuing Officer for this RFP. Please refer all inquiries to the Issuing Officer. Any violation of this condition may be cause for the Issuing Office to reject the offending Offeror's proposal. Offerors must agree not to distribute any part of their proposals beyond the Issuing Office. An Offeror who shares information contained in its proposal with other Commonwealth personnel and/or competing Offeror may be disqualified.

4. Project Description. To address lead exposure in public drinking water systems, it is important for systems to develop and maintain an inventory of service line materials. Developing an inventory and identifying the location of lead service lines (LSL) is the first step for beginning LSL replacement and protecting public health. The Lead and Copper Rule Revisions (LCRR) require public water systems to prepare and maintain an inventory of service line materials. Initial inventories were required to be submitted to state primacy agencies by October 16, 2024. There are numerous public water systems that have not yet submitted their lead service line inventory or have submitted inadequate inventories to the primacy agency.

A. Assist public drinking water systems in the development and submission of complete service line inventories with the lowest percentage of unknown service line categories as reasonable based on the system specific circumstances. The inventories shall be successfully uploaded through the Issuing Office’s current platform.

B. The Offeror shall focus on ensuring adequate evidence that is consistent with specifications within EPA's LCRI regulation and associated guidance to document non-lead service lines.

C. In consultation with the Issuing Office, the Offeror shall provide a comprehensive workplan identifying the specific tasks, technical assistance goals, response, and associated timelines within 30 days of the execution of the contract.

D. Submit a service line inventory that meets the Issuing Office’s and EPA’s expectations for completeness and accuracy no later than 120 calendar days of the initial introductory meeting with the public water supplier. This deadline may change based on EPA inventory compliance date.

E. Assist up to ten eligible public water systems per month, as referred by the Issuing Office. Support will be delivered through a combination of virtual meetings and on-site engagement.

F. Provide biweekly updates via a project status tracker and participate in monthly meetings with the Issuing Office at a minimum or as deemed necessary for the betterment of the project.

G. Offeror shall assist public water systems with developing application packages to apply for funding from PENNVEST or other funding sources to eliminate and replace lead and galvanized requiring replacement (GRR) service lines from their distribution system.

H. Assist public water systems with the completion and delivery of notifications to consumers who are served by a lead, GRR, or unknown service lines, within 30 days of submitting a complete inventory to the Department.

I. Assist public water systems with the completion of the consumer notification certification form and submission of the certification to the Department within 30 days of delivering the consumer notifications.

J. For public water systems who submitted an initial inventory to the Department that was deemed “incomplete”, the Offeror shall resolve service line number discrepancies and re-submit the service line inventory when applicable. An incomplete inventory does not contain all of the service lines within a distribution system or may not match the number of service lines DEP has on record.

K. Aid public water systems in the identification of unknown service lines from their distribution system and resubmit a service line inventory with an agreed upon percentage reduction of unknowns. Offeror will meet with the Issuing Office to discuss an agreed upon technical assistance goal for that specific system.

L. Assist public water systems in determining and utilizing sufficient evidence to categorize a service line as non-lead such as records review, visual inspections, and customer surveys.

M. In consultation with the Issuing Office, the Offeror shall develop and implement a public community engagement plan focusing on the health and safety benefits of service line inventories in drinking water systems.

Enrollment

Enrollment will be established from the Issuing Office’s referrals to the Offeror in accordance to the approved comprehensive workplan.

5. Type of Contract. If the Issuing Office enters into a contract as a result of this RFP, it will be an Established Price contract and will contain the Contract Terms and Conditions attached to this RFP in the Buyer Attachments section.

6. Small Diverse Business (SDB) and Veteran Business Enterprise (VBE) Participation.

The Department of General Services’ Office of Business Inclusion and Supplier Development (BISD) has developed a goal setting policy based upon recommendations from its 2018 Disparity Study. The goal setting policy requires BISD and agencies to identify contract-specific participation goals for SDBs (which include Minority Business Enterprises, Women Business Enterprises, LGBT Business Enterprises, Disability-Owned Business Enterprises, and Service-Disabled Veteran-Owned Small Business Enterprises) and VBEs (which include Veteran-Owned Small Business Enterprises and Service-Disabled Veteran-Owned Small Business Enterprises). Proposers must either agree to meet the participation goals in full or must request a full or partial Good Faith Efforts waiver from one or both of the participation goals.

Failure to meet the participation goals or establish they have made good faith efforts to meet the participation goals will result in rejection of a proposal as nonresponsive. The goals that have been established for this Project are set forth below:

SDB – 20%

VBE – 3%

Further information can be found in RFP Questions Groups 1.2 and 1.3.

7. New SDB and VBE Goal Information Session. The Commonwealth has made significant changes to the SDB and VBE requirements, and failure to meet these requirements may result in your proposal being deemed nonresponsive. Therefore, the Issuing Office will hold an SDB and VBE Goal Information Session for this RFP which we highly recommend you attend. The purpose of this Session is to provide an overview of the RFP and SDB and VBE Participation submission instructions. Offerors may ask questions in accordance with Section 10, Questions and Answers contained in this Description Section. Offerors may also ask questions during the Session, however responses provided during the Session are not official until the question is submitted in writing using the Q&A Board in JAGGAER. Q&A Board questions and written responses shall become part of this RFP.

The location, date, and time of the SDB and VBE Goal Information Session are as follows:

SDB and VBE Goal Information Session - Wed 9/23/2026 9:00 AM ET.

Microsoft Teams meeting

Join: https://teams.microsoft.com/meet/291121574448959?p=QvN0XvYupqZ7X3T3iP

Meeting ID: 291 121 574 448 959

Passcode: 5sR7JQ7r

Need help? | System reference

Dial in by phone

+1 267-332-8737,,388049552# United States, Philadelphia https://teams.microsoft.com/meet/291121574448959?p=QvN0XvYupqZ7X3T3iP https://aka.ms/JoinTeamsMeeting?omkt=en-US https://teams.microsoft.com/l/meetup-join/19%3ameeting_N2VjYWM5NDMtZWNmMS00MGRiLWJkOTUtZTllMmNlNzg5NDE2%40thread.v2/0?context=%7b%22Tid%22%3a%22418e2841-0128-4dd5-9b6c-47fc5a9a1bde%22%2c%22Oid%22%3a%225b7dbe5a-79ca-410e-b42c-0c1c1c6bcf9d%22%7d

Find a local number

Phone conference ID: 388 049 552#

For organizers: Meeting options | Reset dial-in PIN

Recording this meeting requires the consent of all participants. Automatic transcription and AI tools may not be used to transcribe, summarize, or annotate meetings with Commonwealth employees or contractors. If such a tool is detected, it must be disabled; otherwise, Commonwealth employees must leave the meeting.

Privacy and security

An RSVP to the SDB and VBE Goal Information Session is due via email to Brady Fries bfries@pa.gov by Wed 9/23/2026 9:00 AM ET.

8. Rejection of Proposals. The Issuing Office reserves the right, in its sole and complete discretion, to reject any proposal received as a result of this RFP.

9. Incurring Costs. The Issuing Office is not liable for any costs the Offeror incurs in preparation and submission of its proposal, in participating in the RFP process or in anticipation of award of the contract.

10. Questions & Answers. Questions must be submitted using the Q&A Board within this event. Questions must be submitted as individual questions. Only one question is to be submitted at a time and no attachments are to be uploaded. Questions must be submitted by the posted deadline. All questions and responses are considered an addendum to and part of this RFP. The Issuing Office shall not be bound by any verbal information, nor shall it be bound by any written information that is not either contained within the RFP or formally issued by the Issuing Office. The Issuing Office does not consider questions to be a protest of the specifications or the solicitation.

11. Addenda to the RFP. Any revisions to this RFP will be made electronically within this site.

12. Response Date. To be considered for selection, electronic proposals must be submitted on or before the time and date specified. The Issuing Office will reject any late proposals.

13. Proposal Submission: To be considered, Offerors must submit a complete response to this RFP by the due date and time from an official authorized to bind the Offeror to its provisions along with any additional Mandatory Responsiveness requirements as set forth in the Mandatory Responsive Requirements section, which are the only RFP requirements that the Commonwealth will consider to be not waivable. Clicking the submit button within this site constitutes an electronic signature. The Issuing Office reserves the right, in its sole discretion, to (1) waive any other technical or immaterial nonconformities in an Offeror’s proposal, (2) allow the Offeror to cure the nonconformity, or (3) consider the nonconformity in the scoring of the Offeror’s proposal. The proposal must remain valid for 120 days or until a contract is fully executed, whichever is later. If the Issuing Office selects the Offeror’s proposal for award, the contents of https://dialin.teams.cloud.microsoft/783683fb-6d69-4e8b-aa52-814e500ad7b8?id=388049552 https://teams.microsoft.com/meetingOptions/?organizerId=5b7dbe5a-79ca-410e-b42c-0c1c1c6bcf9d&tenantId=418e2841-0128-4dd5-9b6c-47fc5a9a1bde&threadId=19_meeting_N2VjYWM5NDMtZWNmMS00MGRiLWJkOTUtZTllMmNlNzg5NDE2@thread.v2&messageId=0&language=en-US https://dialin.teams.cloud.microsoft/usp/pstnconferencing https://www.pa.gov/content/dam/copapwp-pagov/en/oa/documents/policies/md/200/205_34.pdf mailto:bfries@pa.gov the selected Offeror’s proposal will become, except to the extent the contents are changed through Best and Final Offers or negotiations, contractual obligations.

14. Proposal Format: To be considered, the Offeror must respond to all proposal requirements.

Each proposal consists of four submittal components: Technical, Cost, SDB Participation Submittal (along with the SDB Utilization Schedule, Good Faith Efforts Wavier request, or both) and VBE Participation Submittal (along with the VBE Utilization Schedule, Good Faith Efforts Waiver request, or both). Offerors should provide any other information thought to be relevant, but not applicable to the enumerated categories, as attachments. The Issuing Office reserves the right to request additional information which, in the Issuing Office’s opinion, is necessary to assure that the Offeror’s competence, number of qualified employees, business organization, and financial resources are adequate to perform according to the RFP. The Issuing Office may make investigations as deemed necessary to determine the ability of the Offeror to perform the Project, and the Offeror shall furnish to the Issuing Office all requested information and data.

15. Mandatory Responsiveness Requirements. To be eligible for selection, the proposal must be:

1. Timely received from and timely submitted by an Offeror (see Proposal Submission section);

2. Electronically signed by the Offeror (see Proposal Submission section);

3. Contain a completed SDB participation submittal and additional required documentation;

and either (a) agree to meet the SDB participation goal in full or (b) receive an approved GFE waiver from any unmet portion of the SDB participation goal; and

4. Contain a completed VBE participation submittal and additional required documentation;

and either (a) agree to meet the VBE participation goal in full or (b) receive an approved VBE waiver from any unmet portion of the VBE participation goal.

16. Alternate Proposals. The Issuing Office has identified the basic approach to meeting its requirements, allowing Offerors to be creative and propose their best solution to meeting these requirements. The Issuing Office will not accept alternate proposals.

17. Discussions for Clarification. Offerors may be required to make an oral or written clarification of their proposals to the Issuing Office to ensure thorough mutual understanding and responsiveness to the solicitation requirements. The Issuing Office will initiate requests for clarification. Clarifications may occur at any stage of the evaluation and selection process prior to contract execution.

18. Prime Contractor Responsibilities. The selected Offeror must perform at least 50% of the total contract value or the largest percentage of work as compared to its subcontractors and suppliers. Nevertheless, the contract will require the selected Offeror to assume responsibility for all services offered in its proposal whether it produces them itself or by subcontract. Further, the Issuing Office will consider the selected Offeror to be the sole point of contact with regard to all contractual matters.

19. Proposal Contents.

A. Confidential Information. The Commonwealth is not requesting confidential proprietary information or trade secrets to be included as part of Offerors’ submissions. Accordingly, except as provided herein, Offerors should not label proposal submissions as confidential or proprietary or trade secret protected. Any Offeror who determines that it must divulge such information as part of its proposal must submit the signed written statement described in subsection c. below. After contract award, the selected Offeror must additionally provide a redacted version of its proposal, which removes only the confidential proprietary information and trade secrets, for required public disclosure purposes.

B. Commonwealth Use. All material submitted with the proposal shall be considered the property of the Commonwealth of Pennsylvania. The Commonwealth has the right to use any or all ideas not protected by intellectual property rights that are presented in any proposal regardless of whether the proposal becomes part of a contract. Notwithstanding any Offeror copyright designations contained in proposals, the Commonwealth shall have the right to make copies and distribute proposals internally and to comply with public record or other disclosure requirements under the provisions of any Commonwealth or United States statute or regulation, or rule or order of any court of competent jurisdiction.

C. Public Disclosure. After the award of a contract pursuant to this RFP, all proposal submissions are subject to disclosure in response to a request for public records made under the Pennsylvania Right-to-Know-Law, 65 P.S. § 67.101, et seq. If a proposal submission contains confidential proprietary information or trade secrets, a signed written statement to this effect must be provided with the submission in accordance with 65 P.S. § 67.707(b) for the information to be considered exempt under 65 P.S. § 67.708(b)(11) from public records requests. Refer to the Additional Required Documentation section for a Trade Secret Confidential Proprietary Information Notice Form that may be utilized as the signed written statement, if applicable. If financial capability information is submitted, such financial capability information is exempt from public records disclosure under 65 P.S. § 67.708(b)(26).

20. Best and Final Offers (BAFO). The Issuing Office reserves the right to conduct discussions with Offerors for the purpose of obtaining “best and final offers” in one or more of the following ways, in any combination and order: schedule oral presentations, request revised proposals, conduct an online auction, and enter into pre-selection negotiations.

The following Offerors will not be invited by the Issuing Office to submit a Best and Final Offer: those Offerors which the Issuing Office has determined to be not responsible or whose proposals the Issuing Office has determined to be not responsive; those Offerors which the Issuing Office has determined in accordance with the Offeror Responsibility subsection from the submitted and gathered financial and other information, do not possess the financial capability, experience or qualifications to assure good faith performance of the contract; and those Offerors whose score for their technical submittal of the proposal is less than 75 % of the total amount of technical points allotted to the technical criterion.

The Issuing Office may further limit participation in the best and final offers process to those remaining responsible Offerors which the Issuing Office has determined to be within the top competitive range of responsive proposals. The Evaluation Criteria shall also be used to evaluate the Best and Final offers. Price reductions offered through any online auction shall have no effect upon the Offeror’s Technical Submittal.

21. News Releases. Offerors shall not issue news releases, Internet postings, advertisements or any other public communications pertaining to this Project without prior written approval of the Issuing Office, and then only in coordination with the Issuing Office.

22. Term of Contract. The term of the contract will commence on the Effective Date and will end June 30, 2027, unless renewed annually by letter of mutual consent signed by the Commonwealth and Offeror. The contract may be renewed for up to an additional four consecutive annual terms with a final termination date of June 30, 2031. On July 1, 2027, and each consecutive July 1st of the contract term, the unit rate may be increased by a maximum of three percent (3%) of the unit rate, then in effect, for each year. The escalation is not automatic.

Offeror shall provide a written request, with appropriate justification, to the Issuing Office for approval no later than 90 days prior to each subsequent year if an escalation of the unit rate is requested. The Issuing Office will fix the Effective Date after the contract has been fully executed by the selected Offeror and Issuing Office and all approvals required by Commonwealth contracting procedures have been obtained. The selected Offeror shall not start the performance of any work prior to the Effective Date of the contract, and the Commonwealth shall not be liable to pay the selected Offeror for any service or work performed or expenses incurred before the Effective Date of the contract.

23. Notification of Selection for Contract Negotiations. The Issuing Office will notify all Offerors in writing of the Offeror selected for contract negotiations after the Issuing Office has determined, taking into consideration all of the evaluation factors, the proposal that is the most advantageous to the Issuing Office. Prior to execution of the contract resulting from the RFP, the selected Offeror must be registered in the Commonwealth of Pennsylvania’s Vendor Master file. In order to register, Offerors must visit the Pa Supplier Portal at https://www.pasupplierportal.state.pa.us/ or call the Customer Support Center at 877-435-7363.

24. Notification of Award. Offerors whose proposals are not selected will be notified when contract negotiations have been successfully completed, and the Issuing Office has received the final negotiated contract signed by the selected Offeror.

25. Debriefing Conferences. Upon notification of award, Offerors whose proposals were not selected will be given the opportunity to be debriefed. The Issuing Office will schedule the debriefing at a mutually agreeable time. The debriefing will not compare the Offeror with other Offerors, other than the position of the Offeror’s proposal in relation to all other Offeror proposals. An Offeror’s exercise of the opportunity to be debriefed does not constitute nor toll the time for filing a protest.

26. RFP Protest Procedure. The RFP Protest Procedure is on the DGS website at click here .

A protest by a party that has not or has not yet submitted a proposal must be filed no later than the proposal submission deadline. Offerors may file a protest within seven days after the protesting Offeror knew or should have known of the facts giving rise to the protest, but in no event may an Offeror file a protest later than seven days after the date the notice of award of the contract is posted on the DGS website. The date of filing is the date of receipt of the protest. A protest must be filed in writing with the Issuing Office. To be timely, the protest must be received by 4:00 p.m. on the seventh day.

27. Attachments to the RFP. All attachments to the RFP, including those contained in the Buyer Attachments, RFP Questions and Additional Required Documentation sections, are incorporated into and made part of the RFP.

http://www.dgs.pa.gov/Documents/Procurement%20Forms/Handbook/Pt1/Pt%20I%20Ch%2058%20Bid%20Protests.pdf

28. Evaluation Criteria. The Issuing Office has selected a committee of qualified personnel to review and evaluate timely submitted proposals. The following criteria will be used in evaluating each proposal:

A. Technical: The Issuing Office has established the weight for the Technical criterion for this RFP as 65% of the total points. Evaluation will be based upon the following:

Understanding of Project, Qualifications, Prior Experience, Financial Capability, Requirements, Work Plan, Reports and Project Control, Regulatory Compliance. The final Technical scores are determined by giving the maximum number of technical points available to the proposal(s) with the highest raw technical score. The remaining proposals are rated by applying the Technical Scoring Formula set forth at the following webpage: https://www.dgs.pa.gov/Materials-Services-Procurement/Procurement- Resources/Pages/RFP_SCORING_FORMULA.aspx

B. Cost: The Issuing Office has established the weight for the Cost criterion for this RFP as 35% of the total points. The cost criterion is rated by giving the proposal with the lowest total cost the maximum number of Cost points available. The remaining proposals are rated by applying the Cost Formula set forth at the following webpage:

https://www.dgs.pa.gov/Materials-Services-Procurement/Procurement- Resources/Pages/RFP_SCORING_FORMULA.aspx

C. Domestic Workforce Utilization: Any points received for the Domestic Workforce Utilization criterion are bonus points in addition to the total points for this RFP. The maximum amount of bonus points available is 3% of the total points for this RFP. To the extent permitted by the laws and treaties of the United States, each proposal will be scored for its commitment to use domestic workforce in the fulfillment of the contract. Maximum consideration will be given to those Offerors who will perform the contracted direct labor exclusively within the geographical boundaries of the United States or within the geographical boundaries of a country that is a party to the World Trade Organization Government Procurement Agreement. Those who propose to perform a portion of the direct labor outside of the United States and not within the geographical boundaries of a party to the World Trade Organization Government Procurement Agreement will receive a correspondingly smaller score for this criterion. The Domestic Workforce Utilization Formula is at the following webpage: https://www.dgs.pa.gov/Materials-Services- Procurement/Procurement-Resources/Pages/RFP_SCORING_FORMULA.aspx

29. Offeror Responsibility. To be responsible, an Offeror must submit a responsive proposal and possess the capability to fully perform the contract requirements in all respects and the integrity and reliability to assure good faith performance of the contract. In order for an Offeror to be considered responsible for this RFP and therefore eligible for selection for best and final offers or selection for contract negotiations:

The total score for the technical submittal of the Offeror’s proposal must be greater than or equal to 75% of the available technical points and the Offeror must demonstrate the financial capability to assure good faith performance of the contract.

An Offeror who fails to demonstrate sufficient financial capability to assure good faith performance of the contract as specified herein may be considered by the Issuing Office, in its sole discretion, for Best and Final Offers or contract negotiation contingent upon such Offeror providing contract performance security for the first contract year cost proposed by the Offeror in a form acceptable to the Issuing Office. Based on the financial condition of the Offeror, the

Issuing Office may require a certified or bank (cashier's) check, letter of credit, or performance bond conditioned upon the faithful performance of the contract by the Offeror. The required performance security must be issued or executed by a bank or surety company authorized to do business in the Commonwealth. The cost of the required performance security will be the sole responsibility of the Offeror and cannot increase the Offeror's cost proposal or the contract cost to the Commonwealth.

Further, the Issuing Office will award a contract only to an Offeror determined to be responsible in accordance with the most current version of Commonwealth Management Directive 215.9, Contractor Responsibility Program.

30. Final Ranking and Award. After any best and final offer process is conducted, the Issuing Office will combine the evaluation committee’s final technical scores, the final cost scores, and the domestic workforce utilization scores. The Issuing Office will rank responsible Offerors according to the total overall score assigned to each in descending order. The Issuing Office must select for contract negotiations the Offeror with the highest overall score. The Issuing Office has the discretion to reject all proposals or cancel the request for proposals at any time prior to the time a contract is fully executed when it is in the best interests of the Commonwealth. The reasons for the rejection or cancellation shall be made part of the contract file.

31. Estimated Quantities. The quantities contained in this RFP are estimated only and may increase or decrease dependent upon the needs of DEP. Ancillary items may be added to this acquisition (and resulting purchase order purchase order) at the discretion of both parties at a mutually agreed upon price. The contractor shall be paid at the unit bid price for the quantities supplied.

32. RFP Submission.

1. All Offerors are required to create a user profile within our JAGGAER portal.

2. PROPOSALS WILL ONLY BE ACCEPTED ELECTRONICALLY THROUGH JAGGAER.

3. Technical support is available JAGGAER Support or (800) 233-1121.

4. DEP is not responsible for the support or functionality of any Department of General Services website.

http://www.oa.pa.gov/Policies/md/Documents/215_9.pdf http://www.oa.pa.gov/Policies/md/Documents/215_9.pdf

Required to View Event

Prerequisites Required to Enter Bid

1. Responsibility to Review.

24 September 202624 September 202624 September 202624 September 202624 September 202624 September 202624 September 2026

Buyer Attachments

1. Terms and Conditions PART V.pdf

2. Technical Submittal - LSL Technical Assistance Services.docx

3. Cost Submittal - LSL Technical Assistance Services.xlsx

4. Appendix C - LSL Technical Assistance Services.docx

5. Attachment B - Federal Requirements October 2024.pdf

6. Travel Subsistance and Lodging Information.pdf

7. Solicitation Addendum Form 001.pdf

8. DEP-RFP006735 Goal Information Session - Slide deck.pdf

9. DEP-RFP006735 Attendance Report.pdf

24 September 202624 September 202624 September 202624 September 202624 September 202624 September 2026 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIwOTc4NzM3MjhUZXJtcyBhbmQgQ29uZGl0aW9ucyBQQVJUIFYucGRm&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIwOTc4NTg1ODVUZWNobmljYWwgU3VibWl0dGFsIC0gTFNMIFRlY2huaWNhbCBBc3Npc3RhbmNlIFNlcnZpY2VzLmRvY3g%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIwOTc4NTg3MjVDb3N0IFN1Ym1pdHRhbCAtIExTTCBUZWNobmljYWwgQXNzaXN0YW5jZSBTZXJ2aWNlcy54bHN4&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIwOTc4NTgyNzlBcHBlbmRpeCBDIC0gTFNMIFRlY2huaWNhbCBBc3Npc3RhbmNlIFNlcnZpY2VzLmRvY3g%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIwOTc4NzQyNTdBdHRhY2htZW50IEIgLSBGZWRlcmFsIFJlcXVpcmVtZW50cyBPY3RvYmVyIDIwMjQucGRm&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIwOTc4NTkzNTFUcmF2ZWwgU3Vic2lzdGFuY2UgYW5kIExvZGdpbmcgSW5mb3JtYXRpb24ucGRm&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIxMDE4OTM3MDRTb2xpY2l0YXRpb24gQWRkZW5kdW0gRm9ybSAwMDEucGRm&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIxMDE5NDYwMTZERVAtUkZQMDA2NzM1IEdvYWwgSW5mb3JtYXRpb24gU2Vzc2lvbiAtIFNsaWRlIGRlY2sucGRm&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xNDMxMzYyLTIxMDE4OTAwMzFERVAtUkZQMDA2NzM1IEF0dGVuZGFuY2UgUmVwb3J0LnBkZg%3D%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9

Questions Required Questions

Group 1.1: Technical Questions Instructions:

1.1.1 Please download, complete, and upload the attached Technical Submittal from Buyer Attachments.

1.1.2 Any additional attachments in support of the technical submittal can be uploaded here. If multiple files are needed combine into a single document or create a .zip file combining the files into a single .zip file.

1.1.3 I have read and fully understand the attached Performance Standards.

Group 1.2: Small Diverse Business Participation Instructions:

1.2.1 The Offeror must read and acknowledge the attached Small Diverse Business Participation Information Document

1.2.2 Please download, complete, and upload the attached Small Diverse Business Submittal packet. All fields must be completed prior to submittal and in accordance with the instructions contained in the packet.

1.2.3 Attached is a Model Form of Small Diverse Business/Veteran Enterprise Subcontractor Agreement.

1.2.4 I have read and fully understand the Small and Small Diverse Business qualifications attached in question 1.2.1 above.

Group 1.3: Veteran Business Enterprise Participation Instructions:

1.3.1 The Offeror must read and acknowledge the attached Veteran Business Enterprise Participation document.

1.3.2 Please download, complete and upload the attached Veteran Business Participation Submittal packet. All fields must be completed prior to submittal and in accordance with the instructions contained in the packet.

1.3.3 Attached is s a Model Form of Small Divers/Veteran Enterprise Sub contractor Agreement.

1.3.4 I have read and fully understand the Veteran Business Enterprise qualifications attached in Question 1.3.1 above.

Group 1.4: Cost Instructions:

1.4.1 Please use the attached cost submittal to submit your cost proposal for this procurement. Do not include any assumptions in your submittal. If you do, your proposal may be rejected.

Group 2.1: Standard Forms Instructions:

2.1.1 Please download, sign, and attach the Iran Free Procurement Certification and Disclosure Form.

2.1.2 Please download, sign and attach the Domestic Workforce Utilization Certification Form.

2.1.3 Please download, complete, and attach the Trade Secret/Confidential Proprietary Information Notice.

2.1.4 Any Offeror who determines that it must divulge trade secrets or confidential proprietary information as part of its proposal must submit a redacted version of its proposal, which removes only the confidential proprietary information and trade secrets, for required public disclosure purposes.

2.1.5 Complete and sign the attached Lobbying Certification and Disclosure form (only applicable when federal funds are being used in the amount of $100,000 or more).

2.1.6 Please download, sign, and attach the Worker Protection and Investment Certification Form (BOP-2201).

Group 2.2: Terms and Conditions Instructions:

2.2.1 By submitting a proposal, the Offeror does so on the basis of the attached contract terms and conditions contained in Buyer Attachments.

Group 2.3: Offeror's Representation Instructions:

24 September 202624 September 202624 September 202624 September 202624 September 2026

2.3.1 By submitting a proposal, each Offeror understands, represents, and acknowledges the attached representations and authorizations.

2.3.2

By submitting a proposal, you represent that: (1) you are making a formal submittal in response to a procurement issued by the Commonwealth pursuant to the Procurement Code (62 Pa.C.S. Section 101 et seq.); (2) you are authorized to submit the information on behalf of the person or entity identified; (3) this electronic submittal is deemed signed by you and you are authorized to bind the person or entity identified to the terms of the solicitation and this submittal; and (4) all of the information submitted is true and correct to the best of your knowledge, information, and belief. Any false statements made by you in this submittal are subject to the penalties of 18 Pa.C.S. §4904 (relating to unsworn falsification to authorities).

24 September 202624 September 202624 September 202624 September 202624 September 2026

Product Line Items Product Line Items

There are no Items added to this event.

24 September 202624 September 202624 September 202624 September 2026

Service Line Items Service Line Items

There are no Items added to this event.

24 September 202624 September 202624 September 2026