A04_-_SOW_ORPI_2024_Tahoe_Build_Sheet.pdf
PDF 73 KB Posted
- Attached to
- ORPI LE FLEET BUILDS
- Solicitation number
- 140P1524Q0063
About this file
This document appears to be a Statement of Work (SOW) for the build-out of two (2) 2024 Chevrolet Tahoe vehicles for the National Park Service Intermountain Region. The SOW details the specific equipment, lighting, and other components to be installed in the front, interior, and rear of the vehicles, including push bumpers, LED lights, siren speakers, radar units, radios, gun locks, and cargo storage. It specifies which items are new, vendor-provided, or to be reused from the old vehicles being turned in. The related federal contract opportunity is Solicitation Number 140P1524Q0063, titled "ORPI LE FLEET BUILDS", issued by the Department of the Interior National Park Service Intermountain Region. The SOW does not provide any additional details on the solicitation, such as response dates, award information, pricing terms, or set-asides.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2024 Chevrolet Tahoe (QTY 2)
GSA turn in
• Strip out equipment from old vehicles
• Turn in and swap out for new GSA vehicles
BUILDS
Front:
1. Setina Push Bumper (new)
2. 2 Brookings LEDs mounted to top bar of push bumper
3. 2 Brookings LED lights on sides of push bumper (wired white to alley, white strobe on C3) (new)
4. Vision X Xmitter LED infrared driving light (under push bumper) reuse
5. Vision X LED light bar (on top of push bumper) reuse
6. One siren speaker mounted on bottom of push bumper(new)
7. Headlight/taillight flasher (activated through vehicle harness)
8. 2 Brookings R/B mounted in low in factory fog/outside edge of bumper(new)
9. 2 Brookings Mirror lights (wired white to alley, white strobe on C3) (new)
Inside front:
1. Power distribution unit (Vendor Provided)
2. Brookings visor LED lightbar (Vendor Provided)
3. Jotto floor brackets (Vendor Provided)
4. Radar unit mounted to industry standard reuse
5. Radar antenna mounted to industry standard reuse
6. 12” Jotto Console (see picture for setup)
a. Federal Signal Pathfinder with expansion module (new)
b. Radar Control reuse
c. Wiboost Fleet Cell Phone Booster(new)
d. Tail light/running light/brake light/dash light/interior light kill switch
(black out switch)
e. 3 hole 12v outlet mounted on console reuse
f. Streamlight Stinger DS flashlight mounted right side reuse
7. Cupholders reuse
8. Locking console storage reuse
9. Dome light (Vendor Provided)
10. APX 8500 Motorola Radio (new)
11. Gunlocks double partition mounted (new)
Inside Rear:
1. Troy locking cargo box and mount (Vendor Provided)
2. Setina Cargo Partition (new)
3. Setina Prisoner Partition (new)
4. radar antenna mounted to industry spec reuse
5. Hatch dome light (Vendor Provided)
6. Brookings LED in B or C pillar (new)
Rear:
1. Headlight/taillight flasher (wired through harness)
2. 4 Brooking LED’s (single color) mounted under rear spoiler outside(new)
3. 2 Brooking LEDs mounted under rear taillights/license plate(new)
4. 2 Brooking LED mounted on hatch (new)
5. 2 Brooking LED mounted on inner bottom edge of hatch (new)
6. If white light is on spoiler/lift gate, wire to switch on D pillar for scene lighting
Marking:
1. NPS Ghost Graphics package(new)
2. NPS (last three of vehicle plate) on roof (see pic) (Vendor Provided)
(new)= NPS provided (Vendor Provided)=provided by upfitter Reuse= reuse from turn in vehicle
File details come from the government source that posted it. Updated .