A06_-_140L1722R0008-_Revised_Section_09_90_10_0001.pdf
PDF 6 KB Posted
- Attached to
- GAOA, TRFO PAINTED HAND
- Solicitation number
- 140L1722R0008
About this file
This document provides specifications for painting services required at the Painted Hand Site Improvements and Road Relocation project. The contractor will be required to paint the kiosk using Sherwin-Williams Macropoxy 646-100 Fast Cure Epoxy for metal surfaces and Sherwin-Williams All Surface Enamel Latex for wood and metal surfaces. The contractor must submit color samples to the Contracting Officer's Representative for approval, with the color intended to be similar to the gazebo. The surfaces must be properly prepared and two coats of paint applied to all designated surfaces. Proper drying time is required between coats and paint may only be applied to completely dry surfaces. Each coat must have uniform thickness and be free of defects.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Painted Hand Site Improvements and Road Relocation AMENDMENT
SECTION 09 90 10
PAINTING
PART 1 GENERAL
1.1 DESCRIPTION OF WORK
Paint the kiosk.
1.2 SUBMITTALS
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:
SD-04 Samples
Color Samples ; G
PART 2 PRODUCTS
2.1 PAINT
Metal Surfaces:
Sherwin-Williams Macropoxy 646-100 Fast Cure Epoxy
Wood and Metal Surfaces:
Sherwin-Williams All Surface Enamel Latex
2.2 PAINT COLORS
Color shall be similar to the gazebo. Contractor shall submit color samples to be approved by the Contracting Officer's Representative.
PART 3 EXECUTION
3.1 SURFACE PREPARATION
Remove dirt, splinters, loose particles, disintegrated coatings, and other foreign matter and substances prior to applying paint.
3.2 APPLICATION
Apply two coats of paint to all surfaces designated to be painted or repainted. Allow time between coats to permit thorough drying.
Only apply paints to surfaces that are completely free of moisture as determined by sight or touch.
Apply each coat of paint so that dry film is of uniform thickness and free from runs, drops, ridges, waves, pinholes or other voids, laps, brush marks, and variations in color, texture, and finish.
SECTION 09 90 10 Page 1
Painted Hand Site Improvements and Road Relocation AMENDMENT
-- End of Section --
SECTION 09 90 10 Page 2
File details come from the government source that posted it. Updated .