Attachment_6_-_Dinosaur_Engraving_Examples_0005.pdf
PDF 496 KB Posted
- Solicitation number
- 140L1722R0006
About this file
This document contains a solicitation for improvements to the Dinosaur Hill Recreation Area near Fruita, Colorado. The Bureau of Land Management Colorado Region is seeking proposals for concrete curbs and walkways, trail aggregate, pre-cast concrete curb pans featuring fossil art, shade shelters, drainage ditches, culverts, fences, picnic tables and benches. The estimated value is between $250,000 and $500,000, and work is to be completed from March through May 2023. The solicitation is set aside for small businesses with average annual revenue under $39.5 million. Responses are due by September 1st, 2022 and must include completed SF-1442, Schedule B and Schedule B Worksheet, and technical proposal. The point of contact is Robert Hall at rhall@blm.gov or 970-876-9038. Davis Bacon wage rates for Mesa County apply.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MODEL #412 CONCRETE BENCH - (1) PIECE WITH
ARMRESTS
BLM - COLORADO
OUTDOOR CREATIONS, INC. SCALE: 1” = 24”
DRAWN BY: MNC 4/14/22
OUTDOOR
CREATIONS
INC.
2270 Barney Street Anderson, CA 96007
(530) 365-6106
FAX (530) 365-5129
NOTES:
1. Concrete mix design to include a mixture of Portland Cement, water, coarse and fine aggregates, pure mineral oxide coloring agents (when applicable) to yield a minimum compressive strength of 5000 psi.
2. Final product shall be reinforced with #4 and #5 rebar grid.
3. Product is cast in 1-piece with no assembly required.
4. Hairline cracks may develop over time. These are not structural failures, but inherent characteristics of the material itself.
5. Air pockets are a common occurrence in precast products.
The frequency and size of air pockets are variable and to be expected, especially on vertical surfaces.
6. Concrete corners and edges will chip if not handled according to guidelines. Patch kits are available but may or may not blend and can be variable.
7. There is a level of care and maintenance associated with your product and is the responsibility of the end user. Choosing the right sealer can help minimize those costs.
WEIGHT: 1300 LBS
TEXTURE: Smooth
COLOR: TBD
SEALER: Standard Acrylic
ELEVATION
PLAN
SECTION
24"
½” Radius on all outside corners
24"
84"
24"24"
84"
80"
8"
6"
10"
4"
5"
4" 5"
CUSTOMER APPROVAL x________________________________________
BENCH INSTALLATION::
This bench model will have cast in threaded inserts in the bottom of each leg.
Bench will be supplied with coilrod for mechanical attachment, as an additional security method.
**Bench requires epoxy applied to cover bottom of entire leg. Epoxy adhesive should be checked periodically to ensure continued adhesion.
*Threaded inserts in legs for mounting dowels (1 per leg).
(2) 3/4” x 8” coilrods provided per bench for mounting.
Artwork, engraved into seat of bench no color (unpainted) Overall size: 68" x 20"
(2) BLM logos, cast in full relief, no color on outer of both legs Size: 10 1/4" x 9 1/4"
Artwork, engraved into seat of bench no color (unpainted) Overall size: 68" x 20"
MODEL #412 CONCRETE BENCH - (1) PIECE WITH
ARMRESTS
ENGRAVED ARTWORK ON BENCH SEAT, DINOSAURS
OUTDOOR CREATIONS, INC. DRAWN BY: MNC
OUTDOOR
CREATIONS
INC.
2270 Barney Street Anderson, CA 96007
(530) 365-6106
FAX (530) 365-5129
PLEASE NOTE:
It is VERY IMPORTANT to carefully read over your artwork, this includes, but is not limited to, the spelling of names, dates, places, logos, etc. Outdoor Creations Inc. is not liable for replacement of product, if artwork has been approved. Replacement of product that was approved with incorrect spellings, dates, logos, etc will be the responsibility of the customer.
Thank you for your understanding.
I have read the above statement and approve the artwork:__________________________
File details come from the government source that posted it. Updated .