13 Rework and Repair ES7034.pdf
PDF 184 KB Posted
- Attached to
- B1B TRANSFER ONE WAY Federal contract opportunity
- Solicitation number
- FA8213
About this file
This federal contract solicitation seeks various time delay devices and initiators to be used in munitions. The solicitation includes nine line items for different time delay products identified by National Stock Numbers ranging from 0.3 to 1.6 seconds as well as initiators. First article test plans are due within 30 days of award with first article tests to be completed within 120 days and production articles due by 30 June 2021 to Hill Air Force Base. The solicitation requires compliance with rework and repair procedures outlined in an attached document defining these terms and processes. The contracting agency is the Department of the Air Force Materiel Command Lifecycle Management Center.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 03 FA8213R3039 AMEND 2 Solicitation.pdf | ||
| 02 FA821320R3039 AMEND 1 Solicitation.pdf | ||
| 20 CDRLs_50073.pdf | ||
| 07 SPI_F012340719.pdf | ||
| 16 Item Descriptions 20-50073.pdf | ||
| 06 SOW SPI.pdf | ||
| 01 AIR_SPEC 20-50073.pdf | ||
| 08 SPI_F012340822.pdf | ||
| Synopsis.pdf | ||
| 11 QALI 20-50073.pdf | ||
| 04 SOW Ammunition Data Cards.pdf | ||
| 18 EDL 20-50073.pdf | ||
| 12 QALI 20-50076.pdf | ||
| 21 CDRLs_50076.pdf | ||
| 02 AIR_SPEC 20-50076.pdf | ||
| 17 Item Descriptions 20-70076.pdf | ||
| 03 REPSHIP 20-50073_20-50076.pdf | ||
| FA821320R3039 Solicitation..pdf | ||
| 05 CADPAD Item Marking Instructions.pdf | ||
| 09 SPI_F011676621.pdf | ||
| 10 SPI_F012418149.pdf | ||
| 15 JFQR 20-50076.pdf | ||
| 19 EDL 20-50076.pdf | ||
| 14 JFQR 3746ES.pdf |
Show all 24
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 5
(ES7034)
REWORK AND REPAIR OF NONCONFORMING MATERIAL
Jan 2012 (version)
(a) Rework and Repair are defined as follows:
(1) Rework - The reprocessing of nonconforming material to make it conform completely to the drawings, specifications or contract requirements.
(2) Repair - The reprocessing of nonconforming material in accordance with approved written procedures and operations to reduce, but not completely eliminate, the nonconformance. The purpose of repair is to bring nonconforming material into a usable condition. Repair is distinguished from rework in that the item after repair still does not completely conform to all of the applicable drawings, specifications or contract requirements.
(b) Rework procedures along with the associated inspection procedures shall be documented by the Contractor and submitted to the Government Quality Assurance Representative (QAR) for review prior to implementation. Rework procedures are subject to the QAR's disapproval.
(c) Repair procedures shall be documented by the Contractor and submitted on a Request for
Deviation/Waiver, DD Form 1694, to the Contracting Officer for review and written approval prior to implementation.
(d) Whenever the Contractor submits a repair or rework procedure for Government review, the submission shall also include a description of the cause for the non-conformances and a description of the action taken or to be taken to prevent recurrence.
(e) The rework or repair procedure shall also contain a provision for re-inspection which will take precedence over the Technical Data Package requirements and shall, in addition, provide the
Government assurance that the reworked or repaired items have met reprocessing requirements.
(f) Rework and repair is a supply chain flow-down requirement that applies to contractors and their suppliers, vendors or subcontractors.
(ES7034)
File details come from the government source that posted it. Updated .