2019_LEI_Supervisory_SUV_spec_sheet_final.pdf

2019 – Southwestern Region Law Enforcement and Investigations Vehicle Standards Marked Supervisory SUV

LE Marked Supervisory SUV

The following items will be incorporated into the up-fitting of a marked Law Enforcement patrol vehicle:

Wiring System

Item #1 Patrol Power Modular Universal Power Distribution Center: Provides connectivity an operation to all emergency warning/lighting system, radio communication, and auxiliary electrical components while providing full battery protection. The timer will be set to 1hr. Includes wiring harness.

Item #2 Mobile Radio Wire Harness: Government Furnished Equipment. Installation of Forest

Service radios. A Bendix King and Motorola APX mobile dual band radio wiring harnesses will be provided by the LEI representative. These radio wiring harnesses shall be incorporated into the installer’s proprietary modular wiring harness assuring proper power delivery to unit and battery protection. Antennas for all radios/ frequencies will be installed with wires left in place within console.

Lighting and Siren Control

Item #3 Siren and Light Control unit: Government Furnished Equipment (GFE) Install government supplied unit.

Siren control will be wired to provide Horn Ring Scroll to quickly change tones with tap of horn. Control unit will have a timed audible alert to notify user that any functions are activated. Park Kill feature will be enabled to deactivate the siren when the vehicle is shifted into park. Driver Door open kill feature will be enabled to deactivate the siren when the driver’s door is open. Horn Ring feature will be enabled to change audible siren sound via the horn's ring. Handheld PA microphone will be mounted on the right side of the console.

A. Three stage slide type light control for light bar operation.

Slide Switch Position 1 – Rear light Bar- RED/BLUE flashers, All Rear LED and tail lights. To include inside rear LED flashing slim light.

Slide Switch Position 2 – (To include all of Position 1 functions) PLUS- Front light bar Center/grill LED

Red/Blue flashing lights.

Slide Switch Position 3 – (To include all of Positions 1&2 functions), PLUS- Front LED flashing Red/Blue oscillating and intersection sweep lights, siren, and headlight flasher wig-wags. The Siren, if selected by user, will be programmed to be operated independently. User will be able to activate "Hi-Lo, Wail or

Yelp" as needed by pressing one of three tone programmed buttons and will shut off when vehicle is placed in park and door is opened.

B. One touch programmable button style control position functions:

Button one – Left Alley

Button two – Right Alley

Button three –Take-downs (Front clear steady lights)

Button four – Wig –Wag front flasher lights and Front Red/ Blue Grill lights

Button five – Flashing- Light bar LED rear center flashing lights

Button six – Spot light

Rear directional lighting enabled if possible.

Item #4 Center Console: Troy Product console or equivalent. Can be 16” to 21” model incorporating a slight upward slant in the forward portion will be used to best accommodate the officers specific needs. Instrument console shall be of metal construction with floor mounts and universal face-plates, and INTERNAL drink cup holder. Power Outlets: Two 12-volt DC power outlet and two Dual USB outlets. FS or LEI Rep will show vendor where they will be located on the center console.

Item #5 100 Watt Speaker: A 100 watt speaker with bracket included will be mounted underneath the hood in the front portion of the engine compartment out of sight and protected from dirt/mud. FS radio will be wired to allow radio broadcast to be received from speaker at agent's option.

PA system operated by remote handheld siren/light control will be wired for operation through siren speaker.

Item #6: Dome Lights: A dome light will be mounted above the center console and an additional dome light in the rear cargo area; user switchable from red or white light.

Item #7: Security cargo barrier: Setina (part # 12-VS), or equivalent rear security partition (cargo barrier) all screen on both sides across the top. Install behind rear passenger seats and cargo area.

Communications

Item #8 Wireless Cellular Antenna: Wilson Electronics/ weBoost cellular signal booster, or equivalent. The kit includes amplifier and low profile interior antenna. The amplifier and all wiring shall be concealed. The kit should be powered through the vehicle ignition. Install a universal size phone holder designed for a smart phone – location and style/brand negotiated by LEI or FS representative. A low profile roof antenna will be centered in the roof of the cab and will be a type similar to the AP

Cell/LTE/Wi-Fi by Antenna Plus.

Exterior Lighting

Item #9 Two LED Exterior Lights: Emergency lights installed into the grill - one to be mounted in the front grill of vehicle on driver's side and the other on the passenger side. Light colors will be red on driver’s side and blue on the passenger’s side, unless red/blue combination lights are used.

Item #10 “Wig Wag” and corner LED lights - Front light assembly: Install red/blue or red/blue/white LED modules in each headlight assembly. “Wig Wag” lighting function. “Wig Wags” module function should be installed with high beam override and switched to operate on Level 3 only button on the remote handheld siren/light control. If the vehicle will not accept inserts or the “Wig

Wag” function in the head light / high beam light assembly use a LED Dual Color light bar along with a flasher module, mounted in the grill. Red/White in the center of the grill on the Driver’s side and

Blue/White in the center of the grill on the passenger side, to create a Wig Wag with a solid burn option for Take downs or Scene lighting.

Item #11 Rear taillight assembly: Install two white LED lights for tail lights mount one in each of the top red lenses of the assembly on each side of vehicle and two blue LED lights mounted in the white/clear lens backup lights in the rear light assembly on each side of vehicle. All should have variable flash pattern.

Item#12 Driver’s Side A-Pillar mounted Spotlight: Unity or equivalent.

Interior Lighting

Item #13 Interior Light Bar: Government Furnished Equipment (GFE) Install government supplied unit. Will be Whelen Inner Edge Light Bar or equivalent. Red/Blue/ White LED

Item #14 Rear window, interior LED light bar: Government Furnished Equipment (GFE) Install government supplied rear light bar. (Rear window mount – similar to inner edge/ federal signal ILS system)

Accessories

Item #15 Fire Extinguisher**: 5 pound UL rating 3A40Bc multipurpose dry chemical fire extinguisher. Mounting of fire extinguisher to be negotiated with the LEI representative.

Item #16 Window Tint; all windows will be tinted to FS specifications as made by an FS or LEI representative when vehicles arrive.

Theft Protection

Item #17 Secure-Idle System: Install secure idle switch manufactured by Secure-Idle Inc. or equivalent. The operator should be able to put the vehicle in "Park", push the button on the Secure-Idle

System on the dashboard accessible from the driver's seat (position button on dash board to the left of the steering column), turn the ignition off and remove the key while the vehicle's engine keeps running.

Engine should stop running if someone attempts to drive vehicle without the ignition key. To deactivate, insert the key and turn the ignition to the "on" position. Vehicle components (air conditioning, etc.)

must remain functional while this feature is being used.

Item #18 Patrol Rifle/Shotgun secure storage: Options for securing and storing a patrol rifle and/or a shotgun will be reviewed upon arrival of the vehicle and take into account the specific attributes of the make/model. Any installation will require a locking mechanism and 10 second timer with release button accessible to the driver. Final decision will be made by an FS or LEI representative when vehicles arrive.

Exterior Law Enforcement marking

Item #19 Decals: Application of decal package and door shield (per FSM 5380). Decal material must meet USFS specifications. ALL DECALS PROVIDED BY CONTRACTOR.

Decal specifications for White Vehicles:

1. Decal materials to be made of 3M NON Reflective

2. Door decal to be a 10” shield White background with Brown lettering and trim

3. Vehicle number to be located under shield on each door

4. Vehicles will have a 4” Green NON reflective striping installed in both sides and the rear of the vehicle. There will be 3” White NON reflective lettering (LAW ENFORCEMENT) both sides installed on green stripe above front fender area. (LAW ENFORCEMENT) will be placed on green stripe on rear of vehicle on the driver side.

Deletions from stock vehicle

Item #20 REMOVE the black plastic valance underneath front bumper.

Optional Equipment:

Item #21 Suspension Leveling spacer kit: Contractor will install aftermarket suspension spacer level kit minimum 2” front and minimum 1.25” rear. Spacers will be made of metal. Kit will be OEM certified.

*This option is reserved for SUV’s not received with appropriate clearance for National Forest System roads.

/s/ James Alford 2/28/2019