124D9018B0003_Attachment_4.pdf
PDF 576 KB Posted
- Attached to
- WRP ACEP Fence Construction Calhoun County, TX Federal contract opportunity
- Solicitation number
- 124D9018B0003
About this file
124D9018B0003 attachment 4
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| BID_OPENING_RESULTS.pdf | ||
| 124D9018B0003_Amendment_0002.pdf | ||
| 124D9018B0003_Amendment_0001.pdf | ||
| 124D9018B0003_Attachment_5.pdf | ||
| 124d9018B0003_Attachment_2.pdf | ||
| 124D9018B0003_Attachment_3.pdf | ||
| 124D9018B0003_Attachment_1.pdf | ||
| 124D9018B0003.pdf | ||
| 124D9018B0003_Attachment_7.pdf | ||
| 124D9018B0003_Attachment_6.pdf | ||
| 124D9018B0003_Pre-Solicitation_Notice_WRP_ACEP_Fence.pdf |
Show all 11
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
United States Department of Agriculture Natural Resources Conservation Service
STATEMENT OF WORK
Obstruction Removal (500)
Texas
July 24, 2009 1
These deliverables apply to this individual practice. For other planned practice deliverables refer to those specific Statements of Work.
DESIGN
Deliverables:
1. Design documents that demonstrate criteria in practice standard have been met and are compatible with planned and applied practices
a. Practice purpose(s) as identified in the conservation plan.
b. List of required permits to be obtained by the client
c. Compliance with NRCS national and state utility safety policy (NEM part 503-Safety, Section 503.00 through 503.22)
2. Written plans and specifications including sketches and drawings shall be provided to the client that adequately describes the requirements to install the practice and obtain necessary permits.
3. Certification that the design meets practice standard criteria and comply with applicable laws and regulations
(NEM Subpart A, 505.03(b)(2)).
4. Design modifications during installation as required
INSTALLATION
Deliverables
1. Pre-installation conference with client and contractor
2. Verification that client has obtained required permits
3. Staking and layout according to plans and specifications including applicable layout notes
4. Installation inspection
a. Actual materials used
b. Inspection records
5. Facilitate and implement required design modifications with client and original designer
6. Advise client/NRCS on compliance issues with all federal, state, tribal, and local laws, regulations and NRCS policies during installation
7. Certification that the installation process and materials meets design and permit requirements (NEM Subpart A, 505.03(c)(1)).
CHECK OUT
Deliverables
1. As-built documentation
a. Extent of practice units applied
b. Final quantities
2. Certification that the installation meets NRCS standards and specifications and is in compliance with permits
REFERENCES
• Field Office Technical Guide (eFOTG), Section IV, Conservation Practice Standard – Obstruction Removal, 500.
• National Engineering Manual
• NRCS National Environmental Compliance Handbook
• NRCS Cultural Resources Handbook
124D9018B0003 Attachment 4
File details come from the government source that posted it.