118AD-ApprovedOilListDIWA.5andDIWA.61781200268298.pdf

Voith Turbo

DIWA Service Bulletin Service Bulletin #118AD Issued Date: January 1, 2020

Replaces Service Bulletin #118AC Revised Date: January 1, 2020

DIWA SB11AD

Subject: Oils Approved for Use with the following DIWA Transmissions: DIWA.5, DIWA.6 and DIWA hybrid.

Purpose: This service bulletin provides certain operating, maintenance and service instructions relating to the oils that must be used in connection with the DIWA transmissions described above.

Note: This service bulletin addresses DIWA transmissions operated by end users within North America. This service bulletin does not affect any of the matters described in the following Voith Turbo documents (which address matters relevant for certain transmissions operated by end users outside of North America): 55.6335.32 & 55.6336.32 & G607.

This service bulletin refers to DIWA Transmission DIWA.5 and .6 and

DIWAhybrid.

This service bulletin supersedes all previous service bulletins regarding the same subject matter.

SELECTION AND USE OF PROPER TYPES OF OILS

General: The use of certain types of oil in connection with the DIWA transmissions may result in damage to the transmissions and related equipment. This service bulletin provides important instructions with respect to the selection and use of proper types of oils in connection with the DIWA transmissions.

Preferred

Oils: End users should use the oils described on Appendix A (Preferred Approved Oils for the Voith DIWA Transmission) in connection with the DIWA transmissions. Voith Turbo approved the use of the oils described on Appendix A based on information submitted by the oil manufacturer within the two-year period preceding the date of this service bulletin (or update to this service bulletin).

Permitted

Oils: If the use of the oils described on Appendix A is not feasible, then end users may use the oils described on Appendix B (Inactive Approved Oils for the Voith DIWA Transmission). The oils described on Appendix B were previously listed on Appendix A, but have been removed from Appendix A because either

(a) Voith Turbo has learned that the oils are no longer produced by the applicable oil manufacturer or (b) the applicable oil manufacturer has not completed the recertification process with respect to the oils within the two-year period preceding the date of this service bulletin (or update to this service bulletin).

Service Bulletin #118AD Issued Date: January 1, 2020

Replaces Service Bulletin #118AC Revised Date: January 1, 2020

DIWA SB11AD

Change

List: End users should review Appendix C (Change List – Approved Oils for the Voith DIWA Transmission). Appendix C describes the oils, if any, that Voith Turbo has removed from Appendix A or Appendix B since the date of the previous update to this service bulletin.

Impact on

Warranty: End users are instructed to avoid the use of any type of oil that is not described on Appendix A or Appendix B in connection with the DIWA transmissions. Neither Voith Turbo nor any of its affiliates will have any liability or responsibility for any damage, loss or other claim arising from the use of any oil that is not described on Appendix A or Appendix B in connection with the DIWA transmission.

Oil Supply: The oil market is subject to rapid changes due to frequent changes of approval numbers and the associated reformulations of oils. End users should note that Voith Turbo may remove oils from Appendix A and/or Appendix B for any or no reason, including as a result of changes in the oil market, when end users are making decisions regarding oil supply or purchase commitments. Neither Voith Turbo nor any of its affiliates will have any liability or responsibility for any loss or other claim arising from any change made to Appendix A and/or Appendix B, including any loss or other claim relating to any end user’s purchase of oils that are removed from Appendix A and/or Appendix B.

Oil

Changes: If an end user wishes to change the type of oil that it is using in connection with a DIWA transmission (to an oil described on Appendix A or Appendix B), then the end user should cause all storage tanks and associated fluid handling equipment to be thoroughly cleaned to remove all traces of the previously used oil.

APPROVAL/RECERTIFICATION PROCESS

Set forth below is an overview of the approval/recertification process that Voith Turbo generally will use to determine whether an oil may be described on Appendix A. If an end user wishes to use an oil that is not described on Appendix A or Appendix B, then the end user may request the applicable oil manufacturer to comply with the process described below and Voith Turbo will determine whether it is willing to add the oil to Appendix A. Importantly, Voith Turbo will move an oil from Appendix A to Appendix B if an oil manufacturer fails to comply with the process described below with respect to the oil at least once during every two-year period.

1. The oil manufacturer must fill out the Data Sheet for Automatic Transmission Oils

(150.00364110_1.0). This form may be obtained by contacting the DIWA Road service department at Voith Turbo.

Note: All Information must be filled out completely, or the application will be returned without further action on the part of Voith Turbo.

Service Bulletin #118AD Issued Date: January 1, 2020

2. The oil manufacturer must submit a one pint base sample of the oil that is being evaluated.

3. The oil manufacturer must submit a laboratory analysis report for the one pint base sample.

The analysis must cover the following criteria:

Acid Number (ASTM D664 mod)

Viscosity at 40 and 100 deg C, Element data in ppm (Fe, Al, Cr, Cu, Pb, Sn, Ni, Ag, Si, Na, B, Zn, P, Ca, Mg, Ba, Mo, K).

IF analysis report of sample.

4. After its review of the information submitted by the oil manufacturer, Voith Turbo will notify the oil manufacturer whether the oil will be described on Appendix A.

OTHER SERVICE BULLETINS

This service bulletin does not supersede or otherwise affect any service bulletins regarding any other subject. End users should review and comply with all other service bulletins relating to

DIWA transmissions. Without limitation, end users should review and comply with the

Servicing Schedule for DIWA Transmissions contained in Service Manual DIWA 5 and

DIWA 6 which contains important operating, maintenance and service instructions regarding oil and filter changes and for any service information related to the

DIWAhybrid.

IMPORTANT NOTICE

The information contained in this service bulletin, including the appendices, is current as of the date of this service bulletin (or update to this service bulletin). Voith Turbo reserves the right to modify the contents of this service bulletin, including the appendices, at any time.

Service Bulletin #118AD Issued Date: January 1, 2020

Appendix A: Preferred Approved Oils for the Voith DIWA Transmission

COMPANY NAME (Marketer) BRAND NAME Approval Number

GM

Mercon

Class Base Synthe tic (S) or Minera l (M)

Recertification Date

Drain Interval Mi/Km

Amalie Oil Company Amalie Dexron VI Synthetic ATF

828100382 S 4/18/20 36,000 / 58,000

Amalie Oil Company Amalie Dex-III G 828100382 S 05/07/20 36,000 / 58,000

Amalie Oil Company Amalie Dex-III H 828100382 S 05/07/20 36,000 / 58,000

Amsoil Torque Drive Synthetic

ADT55 S 12/18/19 36,000 / 58,000

BP Oil and Exploration Autran Syn 295 B02037PBB S 06/13/20 72,000 / 115,875

Castrol Ltd. Heavy Duty Lube TranSynd ATF G3401NA S 02/15/20 72,000 / 115,875

Chevron Lubricants Delo Syn ATF HD GTL09070

GTL09071

S 12/04/19 72,000 / 115,875

Chevron Lubricants Havoline Multi Vehicle ATF

GTL09754 S 12/15/19 36,000 / 58,000

Chevron Lubricants Chevron ATF

MERCON® V

M5111207 S 12/14/19 36,000 / 58,000

Chevron Lubricants Synthetic ATF Heavy Duty

GTL09070

GTL09071

S 12/14/19 72,000 / 115,875

Citgo Petroleum Corp Quatrasyn Synthetic Transmission Fluid

632493001 S 03/10/21 36,000 / 58,000

Exxon Mobil

Mobil ATF LT 71141 RH000079 S 01/28/21 72,000 / 115,875

Exxon Mobil Mobil Delvac Synthetic ATF

RH000120AAR S 01/29/20 72,000 / 115,875

Exxon Mobil Mobil Delvac 1 RH000120AAR S 11/25/20 72,000 / 115,875

Fuchs Petrolub SE Fuchs Pentosin

ATF1

1058900/T- G48-1

S 04/29/21 72,000 / 115,875

Fuchs Petrolub SE Fuchs Titan ATF 1 1058900/T- G48-1

S 04/29/21 72,000 / 115,875

Gulf Oil International Multi- Vehicle ATF (not in USA)

M5071103 S 02/07/20 72,000 / 115,875

Kuwait Petroleum Q8 Auto 15 AT-13286-08 S 10/9/21 36,000/58,000

Kuwait Petroleum Q8 Auto 14 AT-13251-13 S 10/9/21 36,000/58,000

Petro-Canada Lubricants

Inc.

Dexron VI ATF RDL-3434

J-6001

H36006

S 05/19/21 36,000 / 58,000

Petro-Canada Lubricants

Inc.

Dura Drive HD

Syn Blend

ATF

RDL-3208

M5970801

H36007

S 05/19/21 72,000 / 115,875

Phillips 66 Company Mercon V ATF M5091001 S 12/20/19 36,000 / 58,000

For Voith Transmission: DIWA.5, DIWA .6 and DIWAhybrid

Service Bulletin #118AD Issued Date: January 1, 2020

Replaces Service Bulletin #118AC Revised Date: January 1, 2020

DIWA SB11AD

Phillips 66 Company Versa Trans ATF M5091007 S 12/20/19 36,000 / 58,000

Phillips 66 Company (Kendall) Mercon V ATF M5091001 S 12/20/19 36,000 / 58,000

Phillips 66 Company (Kendall) Versa Trans ATF M5091007 S 12/20/19 36,000 / 58,000

Shell Global Solutions Shell Spirax S2 ATF A389

140001761844 S 12/20/19

36,000 / 58,000

Valvoline SynGard ATF ES 000083044001 S 04/24/21 72,000 / 115,875

Volvo Group Volvo Automatic Transmission Fluid

IM1103028-A

IM1103029-A

S 12/15/19 36,000 / 58,000

Appendix B: Preferred Approved Oils for the Voith DIWA Transmission

COMPANY NAME (Marketer) BRAND NAME Approval

Number

Class

Base

Recertificatio n Date

Drain Interval

Mi/Km

1 Shell Global Solutions Shell Spirax 6 ATF

VM Plus

140007493092 S 12/19/19 108,000 /

173800*

Kuwait Petroleum Q8 Auto 15V IM1205361-A S 12/13/19 108,000 /

173800*

Petro-Canada Lubricants Inc Dura Drive HD Long Drain ATF

RDL-3784 S 12/16/20 108,000 /

173800*

* Oil sampling and analysis of the ATF from each unit under warranty must occur at 18,000 mile (29,000 KM) intervals with the samples being taken prior to the oil change. Sampling must be performed using Voith oil analysis kit part number 304012201 exclusively. The use of any other laboratory and or sampling kits will limit the drain interval to 72,000 miles. Based on the results of testing Voith may advise the customer to return to a 72,000 mile drain interval. The failure to follow Voiths’ instructions to reduce the drain interval will result in reduced warranty coverage in the event of an ATF related failure as determined by Voith. For additional information please refer to the section “Important Warranty requirement for fluid intervals beyond 36,000 miles “ in this document.

END USERS ARE NOT AUTHORIZED OR INSTRUCTED TO USE ANY OF THE

ABOVE-DESCRIBED OILS IF ANY PORTION OF THE APPLICABLE OIL IS

MODIFIED AS A RESULT OF A CHANGE IN THE BASE OIL, AN ADDITIVE

PACKAGE OR ADDED COMPONENTS.

For Voith Transmission: DIWA.5 and DIWA .6 approved for 108,000 mile drain interval

Service Bulletin #118AD Issued Date: January 1, 2020

Appendix C: Inactive Approved Oils For the Voith DIWA Transmission

Oil Manufacturer Oil Brand Approval Number

Transfer Date Drain Interval

Amalie Oil Company Dexron III - G 827601181 01-01-18 36,000 / 58,000

Amalie Oil Company Dexron III - H 827602281 01-01-18 36,000 / 58,000

Amalie Oil Company Dexron VI Synthetic J-60156 01-01-18 36,000 / 58,000

Chevron Products Company

Havoline Synthetic ATF Multi-Vehicle GTL10758 01-09-17 36,000 / 58,000

Castrol Ltd. Heavy Duty Lube

Castrol ATF Dex II Multivehicle E02005PBA 01-14-19 36,000 / 58,000

END USERS ARE NOT AUTHORIZED OR INSTRUCTED TO USE ANY OF THE

ABOVE-DESCRIBED OILS IF ANY PORTION OF THE APPLICABLE OIL IS

MODIFIED AS A RESULT OF A CHANGE IN THE BASE OIL, AN ADDITIVE

PACKAGE OR ADDED COMPONENTS.

Appendix D: Change List – Approved Oils for the Voith DIWA Transmission

Service Bulletin #118AD Issued Date: January 1, 2020

Oil Manufacturer Oil Brand

GM

Approval Number

Drain Interval

Transfer Date

Description of Transfer

Important Warranty requirement for fluid intervals beyond 36,000 miles

For units that are covered by Voith warranty and are using fluids that have a drain interval in excess of 36,000 miles Voith has the following requirements in order to maintain the existing warranty.

1. Oil sampling and analysis of the ATF from each unit under warranty must occur at 18,000 mile (29,000 KM) intervals with the samples being taken prior to the oil change.

Note: these procedures are outlined in Voith Service Bulletin 25…

2. Analysis results must be compared to the standards set in Voith Service Bulletin 4x

If irregularities are found in the oil sample results, that is, the results are outside the limits set forth in Voith DIWA Service Bulletin 4x you will need to decrease your drain intervals.

3. If irregularities continue in future oil samples, your oil analysis company or Voith may suggest a course of action. These suggestions should be followed and if not already done, you should also contact the Voith DIWA service department for additional information and direction. This may include pulling the oil pan and conducting a bottom end inspection of the transmission or other diagnostic measures.

4. In the event there is a warrantable failure of the transmission, Voith Turbo Inc may require the following information for failure evaluation and warranty claim processing.

A copy of the current oil analysis report along with copies of the past three analysis reports. Voith may also require copies of ALL oil analysis reports.

Information regarding oil type (Company name, Product name and approval number).

The approval number is the licensing number provided by GM or Ford Mercon -V®.

If these records or the required information cannot or will not be presented to Voith upon request, Voith reserves the right to limit or deny warranty coverage on the unit in question. This limitation or revocation of warranty coverage may also include the entire fleet.

1) General Data

Product Marketer

Product Brand Name

Unique oil code

Rebrand of

Reblend of

GM-Dexron License Number

Mercon License Number

Market region Europe North America Asia

Africa South America Oceania

2) Contents Mass % Supplier and Code Kin.Visc. @ 100°C

Base oil 1 mm²/s

Base oil 2 mm²/s

Base oil 3 mm²/s

Base oil 4 mm²/s

Mass % Supplier and Code

Additive 1

Additive 2

Additive 3

Additive 4

Mass sum must be 100

Phosphorus P ppm Sodium Na ppm

Boron B ppm Barium Ba ppm

Calcium Ca ppm Potassium K ppm

Silicon Si ppm Magnesium Mg ppm

Zinc Zn ppm Molybdenum Mo ppm

Voith

Turbo

Data Sheet - ATF for DIWA Transmissions in case of Rebrand/Reblend

GM-Dexron License No. of Original in case of Rebrand/Reblend

Mercon License No. of Original

API Group

Type

150.00364110 Version: 1.3 / 2017-04-18

Replaces Version: 1.2 Page 1 / 7

Replaces Version: 1.2 Page 2 / 7

3) Physical Properties

Kinematic Viscosity @ 40°C DIN 51562 mm²/s

Kinematic Viscosity @ 100°C DIN 51562 mm²/s

Viscosity Index DIN ISO 2909 -

Brookfield Viscosity @ -40°C DIN 51398 mPa·s

Density @ 15°C DIN 51757 kg/m³

Pour Point DIN ISO 3016 °C

Flash Point DIN EN ISO 2592 °C

Fire Point DIN EN ISO 2592 °C

Total Acid Number ASTM D 664 mg KOH/g

4) Test Results

FZG-Test A/8,3/90 - Scuffing Load Capacity

Failure Load stage DIN 51354 KS FAIL

Shear stability

KV100 after 20 h KRL @ 60°C DIN 51350-6 – KRL/C mm²/s

Compatibility with Sealing Material DIN ISO 1817 (Freudenberg-Test)

Change of Volume and Hardness with ACM and FPM after 168 h @ 95°C and 150°C

Test pieces Ø 36mm, thickness 2 mm

ACM 80 168 h / 95°C 168 h / 150°C

Change of Shore Hardness

Change of Volume % %

FPM 80 168 h / 95°C 168 h / 150°C

Change of Shore Hardness

Change of Volume % %

75 FKM 585 (Freudenberg) 168 h / 95°C 168 h / 150°C

Change of Shore Hardness

Change of Volume % %

Replaces Version: 1.2 Page 3 / 7

5) IR-Diagram

Diagram in transmittance layout to be enclosed.

6) Sample

ONLY for approvals for North America a 1 pint sample to be sent to Voith Turbo Inc. USA (see 8).

7) Contact Person

Name

Phone

Fax

E-mail

Address

Date Signature

8) Contacts Voith

Voith Turbo GmbH & Co. KG Markus Dittes

Center of Competence Materials & Fluids Phone +49 7321 37 4096

Alexanderstraße 2 Fax +49 7321 37 7693

89522 Heidenheim - Germany E-mail Markus.Dittes@Voith.com

Voith Turbo Inc. Mark Bair

DIWA Bus Transmissions Phone +1 717 767 3254

25 Winship Road Fax +1 717 767 3210

York, PA 17402 - USA E-mail mark.bair@voith.com

9) General Conditions

If the approval is granted the product will be added to the respective Voith approval list.

The approval is limited to 24 months. For re-approval the ongoing production and marketing of the product has to be re-confirmed by signed letter sent to Voith prior to expiration.

The approval can be withdrawn by Voith at any time without stating any reason.

Any change of the product has to be indicated immediately and will terminate the approval.

Replaces Version: 1.2 Page 4 / 7

Replaces Version: 1.2 Page 5 / 7

Approval

Product Marketer

Product Brand Name

Unique oil code

Not Approved Approved for

Voith Approval List H55.6335.xx - Standard Drain Intervals

H55.6336.xx - Extended Drain Intervals

150.014524.xx - 180.000 km Drain Intervals

US SB 013/118 - Standard Drain Intervals

US SB 013/118 - Extended Drain Intervals

US SB 013/118 - 108.000 miles Drain intervals

Approval Date Expiration Date

Name Signature

Name Signature

Re-Approval

Re-Approval Date Expiration Date

Name Signature

Re-Approval Date Expiration Date

Name Signature

Re-Approval Date Expiration Date

Name Signature

Re-Approval Date Expiration Date

Name Signature

Re-Approval Date Expiration Date

Mr. Mondorf

Dr. Burr

Replaces Version: 1.2 Page 6 / 7

Name Signature

Replaces Version: 1.2 Page 7 / 7