1-Project Drawings IFB.pdf

PDF 9 MB Posted Jun 16, 2026

Attached to: Pump Station No. 1 Improvements
Solicitation number: Not on record
Issued by: Lancaster County, Pennsylvania

About this file

Written by GovTribe AI · Jun 17, 2026

This document is a comprehensive set of project drawings and specifications for the Pump Station No. 1 Improvements project issued by Warwick Township Municipal Authority in Lancaster County, Pennsylvania. The project (Entech No. 4185.087) encompasses the replacement of the existing duplex pumping system, pump control panel, soft starters, automatic transfer switch, and emergency diesel generator, along with wet well rehabilitation and lining. Additional facility improvements include installation of a new gas monitoring system, electrical wiring upgrades, and HVAC ventilation system enhancements. The project is divided into three separate contracts: Contract 2026-01 for General/Process Mechanical work, Contract 2026-02 for HVAC work, and Contract 2026-03 for Electrical/SCADA systems. The mandatory pre-bid conference is scheduled for Wednesday, July 8th, 2026 at 10:00 a.m. at the Warwick Township Building (315 Clay Road, Lititz, PA 17543), with electronic bid submission deadline of 3:00 p.m. local time on Thursday, July 30th, 2026 via the PennBid Program. Attendance at the mandatory pre-bid conference is required for bid eligibility.

The drawing set includes detailed site plans, floor plans at multiple levels (operating, intermediate, and lower levels), process and instrumentation diagrams, demolition plans, structural details, HVAC specifications, and electrical one-line diagrams. Key equipment specifications include two submersible pumps rated at 1200 GPM @ 241.8 FT TDH with 135 HP motors, a 350 kW diesel emergency generator with 24-hour sub-base fuel tank, three electric unit heaters (10 kW each at 480V/3-phase), and a roof-mounted supply fan. The facility operates in a classified hazardous area (Class 1, Division 1, Group D with high humidity) requiring appropriate electrical equipment. The contractor must maintain existing plant operations during construction, provide bypass pumping as required (peak flow xx MGD), protect all existing equipment from contamination and damage, and comply with Pennsylvania's Act 287 for underground utility location. All underground utilities must be verified by calling 1-800-242-1776 (PA One Call System) prior to earthmoving activities. Prevailing wage rates apply to this public works project, and the contractor must comply with the Public Works Employment Verification Act (Act 127).

View the file

Other files

File	Type	Posted
2-Project Manual IFB.pdf	PDF	Jun 16, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REFERENCE: USGS 7.5 MINUTE SERIES (TOPOGRAPHIC MAP) - LITITZ AND LANCASTER, PENNSYLVANIA

SCALE:1

1" = 2000'

LOCATION / TOPOGRAPHICAL MAP

00 2000' 4000'

PROJECT SITE

DRAWING INDEX CONTRACT 2026-01

SHEET

NO. DRAWING DESCRIPTION/TITLE

GENERAL

G-001 DRAWING INDEX, GENERAL PROJECT NOTES, DRAWING CONVENTIONS AND MAPS

G-002 DRAWING LEGENDS, SYMBOLS AND ABBREVIATIONS

G-101 AERIAL SITE PLAN - EXISTING CONDITIONS

G-102 NFPA 820 HAZARDOUS AREA CLASSIFICATION PLANS, SECTIONS, LEGEND AND

SCHEDULE

G-601 PROCESS AND INSTRUMENTATION DIAGRAM

DEMOLITION

GED-401 PUMP STATION DEMOLITION PLANS, KEYED NOTES AND PHOTOGRAPHS

CIVIL

C-101 FACILITY SITE PLAN

STRUCTURAL

S-101 PUMP STATION OPERATING LEVEL FLOOR PLAN SECTIONS AND DETAIL

PROCESS

D-101 PUMP STATION UPPER LEVEL FLOOR PLAN AND NOTES

D-102 PUMP STATION INTERMEDIATE AND LOWER LEVEL FLOOR PLANS AND NOTES

D-301 PUMP STATION SECTIONS

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\G-001.dwgLa st

E di te d by : p m cc ar ty

G-001

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

D R

, G

P R

C T

N O

S, D R

G C

O N

N S

WARWICK TOWNSHIP MUNICIPAL AUTHORITY

PUMP STATION NO. 1 UPGRADE PROJECT

CONTRACT NO. 2026-01 GENERAL / PROCESS MECHANICAL

CONTRACT NO. 2026-02 HVAC

CONTRACT NO. 2026-03 ELECTRICAL/SCADA

OFFICE ADDRESS:

315 CLAY ROAD

LITITZ, PA, 17543-0336

ISSUED FOR

BIDDING

JUNE 16, 2026

A. THE LOCATION AND DIMENSIONS OF ALL SITE FEATURES SHOWN ARE

APPROXIMATE AND MUST BE VERIFIED IN THE FIELD BY THE

CONTRACTOR.

B. ALL UNDERGROUND UTILITIES SHALL BE LOCATED BY THE

CONTRACTOR PRIOR TO ANY EARTH MOVING ACTIVITIES, PURSUANT

TO ACT 287. UNDERGROUND UTILITY LOCATIONS MUST BE VERIFIED

BY CALLING 1-800-242-1776.

C. THESE DRAWINGS MUST BE WORKED IN CONJUNCTION WITH THE

PROJECT MANUAL / SPECIFICATIONS.

D. CONTRACTOR SHALL USE, MAINTAIN AND PROVIDE ADEQUATE,

PROPER SHORING DEVICES AS REQUIRED ON SITE AT ALL TIMES.

CONTRACTOR SHALL CONFORM TO ALL LOCAL, STATE AND FEDERAL

REGULATIONS.

E. CONTRACTOR SHALL USE RUBBER - TRACKED EXCAVATOR OR

PROVIDE 1" THICK (MINIMUM) MATTING TO PROTECT PAVED STATE

AND PRIVATE ROAD SURFACES, DURING TRENCHING, EXCAVATION

AND GENERAL CONSTRUCTION OPERATIONS.

F. THE PRETREATMENT PLANT SHALL REMAIN FULLY OPERATIONAL

DURING CONSTRUCTION ACTIVITIES. THE CONTRACTOR SHALL

PROVIDE BY-PASS PUMPING AS REQUIRED. PEAK FLOW IS xx MGD.

G. THE CONTRACTOR SHALL PROVIDE SUITABLE PROTECTION FOR ALL

EXISTING PROCESS, MECHANICAL, HVAC, ELECTRICAL, AND CONTROL

EQUIPMENT LOCATED WITHIN OR ADJACENT TO THE WORK AREA.

EQUIPMENT PROTECTION SHALL PREVENT CONTAMINATION, DAMAGE, OR

IMPAIRMENT BY DUST, DIRT, DEBRIS, OVERSPRAY, MOISTURE, OR OTHER

WORK-RELATED MATERIALS. THE CONTRACTOR SHALL TAKE MEASURES TO

EFFECTIVELY PROTECT, AT HIS OWN EXPENSE, ALL EXISTING PROCESS

EQUIPMENT FOR THE DURATION OF THE CONSTRUCTION PERIOD.

PROTECTION MEASURES SHALL INCLUDE, BUT ARE NOT LIMITED TO,

TEMPORARY COVERS, ENCLOSURES, BARRIERS, OR VENTILATION SYSTEMS

AS REQUIRED TO MAINTAIN EQUIPMENT CLEANLINESS AND FUNCTIONALITY.

COVERS SHALL BE OF NON-FLAMMABLE, DURABLE MATERIALS AND SHALL BE

SECURELY FASTENED TO PREVENT DISPLACEMENT. EXISTING EQUIPMENT

SHALL NOT BE EXPOSED TO BLASTING, GRINDING, WELDING, COATING

APPLICATION, CLEANING, OR REPAIR OPERATIONS WITHOUT ADEQUATE

PROTECTION. PROTECTIVE MATERIALS SHALL BE REMOVED ONLY AFTER

COMPLETION OF ALL ACTIVITIES THAT MAY GENERATE CONTAMINANTS. THE

CONTRACTOR SHALL RESTORE ANY EQUIPMENT, SURFACES, OR FINISHES

DAMAGED OR CONTAMINATED DURING THE WORK TO THEIR ORIGINAL

CONDITION AT NO ADDITIONAL COST TO THE OWNER.

GENERAL NOTES

DRAWING CONVENTIONS

SECTION INDICATOR

DETAIL INDICATOR

ELEVATION INDICATOR1

X-201

A X-301

X-501

SCALE:1 1" = 1'-0"

DRAWING TITLE

DRAWING NUMBER

SECTION LETTER

DRAWING NUMBER

ELEVATION LETTER

IDENTIFICATION NUMBER/LETTER

DRAWING TITLE

SHEET KEYNOTE SYMBOL

DEMOLITION KEYNOTE

SYMBOL

PHOTOGRAPH INDICATOR

PHOTOGRAPH

IDENTIFICATION

DRAWING NUMBER

DETAIL NUMBER

TEXT

INDICATES EXIST

CONDITIONS/FEATURES

INDICATES NEW

WORK/FEATURES

DENOTES REFERENCE TO ENLARGED

PLANS WITH DRAWING NUMBER

INDICATED

XXX

DRAWING INDEX CONTRACT 2026-03

SHEET

NO. DRAWING DESCRIPTION/TITLE

GENERAL

G-001 DRAWING INDEX, GENERAL PROJECT NOTES, DRAWING CONVENTIONS AND MAPS

G-002 DRAWING LEGENDS, SYMBOLS AND ABBREVIATIONS

G-102 NFPA 820 HAZARDOUS AREA CLASSIFICATION PLANS, SECTIONS, LEGEND AND

SCHEDULE

G-601 PROCESS AND INSTRUMENTATION DIAGRAM

ELECTRICAL

ED-601 EXISTING ONE LINE DIAGRAM

E-101 PUMP STATION UPPER FLOOR LEVEL PLAN AND NOTES

E-601 PROPOSED ONE LINE DIAGRAM

DRAWING INDEX CONTRACT 2026-02

SHEET

NO. DRAWING DESCRIPTION/TITLE

GENERAL

G-001 DRAWING INDEX, GENERAL PROJECT NOTES, DRAWING CONVENTIONS AND MAPS

G-002 DRAWING LEGENDS, SYMBOLS AND ABBREVIATIONS

HVAC

MD-101 PUMP STATION DEMOLITION PLANS, SECTIONS, KEYED NOTES AND PHOTOGRAPHS

M-101 PUMP STATION PLANS, SECTIONS AND NOTES

M-501 PUMP STATION DETAILS, SCHEDULES AND NOTES

PUMP STATION NO. 1

LAT: 40° 07' 34.8"N

LONG: -76° 19' 04.2"W

SCALE:2 NONE

VICINITY MAP

1-800-242-1776

(TOLL FREE)

"Pa. Law requires advance notification"

PA ONE CALL FOR PRELIMINARY DESIGN

DATE - 2025-03-XX

SERIAL NUMBER ISSUED:

XXXXX

1-800-242-1776

ANIA ONE CALL SYSTEM

, INC

STOP-CALL BEFORE YOU D

356.00

PROPOSED SPOT/POINT ELEVATION

PROPOSED GRADE (MAJOR)

PROPOSED STORM DRAIN

PROPOSED WATER LATERAL

PROPOSED PAVED SURFACE

ROCK CONSTRUCTION ENTRANCE

PROPOSED CHAIN LINK FENCE

PROPOSED INLET

PROPOSED STORM DRAIN MANHOLE

PROPOSED YARD HYDRANT

PROPOSED GATE VALVE

PROPOSED PLUG VALVE

PROPOSED MECHANICAL JOINT FITTING

LIMIT OF DISTURBANCE / NPDES PERMIT AREA

B-5

EXISTING FACILITY TO BE REMOVED

EXISTING FACILITY TO BE MODIFIED

NEW BUILDING FACILITIES

SUPER SILT FILTER FABRIC FENCE

PROPOSED MACADAM ACCESS

ROAD/ STONE DRIVEWAY

EROSION CONTROL BLANKET STEEP SLOPES

PROPOSED WATER MAIN

PROPOSED HYDRANT

RIP RAP OUTLET PROTECTION

SILT SACK INLET PROTECTION

PROPOSED CURB STOP

PROPOSED WATER METER & METER BOXWMB

PROPOSED WASTE ACTIVATED SLUDGE / SCUM LINE

PROPOSED SANITARY MAIN

FILTER FABRIC FENCE - 30"

FILTER FABRIC FENCE - 18"

PROPOSED ELECTRIC

PROPOSED SANITARY MANHOLE

356 PROPOSED GRADE (MINOR)

EROSION CONTROL SWALE MATTING

PROPOSED EASEMENT

TEXT PROPOSED TEXT

PROPOSED SANITARY FORCE MAIN

TRENCH PLUG

PROPOSED UTILITY WATER LINE

PROPOSED WASTEWATER LINE

PROPOSED RETURN ACTIVATED SLUDGE LINE

PROPOSED WASTE ACTIVATED SLUDGE LINE

PROPOSED SLUDGE LINE

PROPOSED SCUM LINE

PROPOSED DRAIN LINE

PROPOSED CLEAN OUTCO

PROPOSED AIR LINE

SwD Bh

18" COMPOST FILTER SOCK

24" COMPOST FILTER SOCK

32" COMPOST FILTER SOCK

12" COMPOST FILTER SOCK

TEMPORARY CHAIN LINK FENCE

ORANGE SAFETY FENCE

PROPOSED SPLIT RAIL FENCE

R U

MOUNTED BEHIND PANEL DOOR

ALARM LIGHT

NOT ACCESSIBLE TO OPERATOR

ACCESSIBLE TO OPERATOR

AUXILLIARY LOCATION

NOT ACCESSIBLE TO OPERATOR

ACCESSIBLE TO OPERATOR

COMPLEX OR UNDEFINED INTERLOCKI

D C

O N

U M

G R

C O

C K

O R

MOUNTED LOCALLY

MOUNTED ON FACE OF PANEL

INDICATE

SCAN

LOW/LIGHT

CONTROL STATION

ORIFICE

SWITCH

RECORD/PRINT

TRANSMIT

INTEGRATE/TOTALIZE

VALVE

RELAY

MULTIFUNCTION

DRIVE/ACTUATE

MIDDLE

COMPUTING OR SIGNAL CONVERTING

SPEED/FREQUENCY

TEMPERATURE/TORQUE

POSITION

VISCOSITY/VIBRATION

MULTIVARIABLE

EVENT, STATE PRESENCE

WEIGHT

STATUS

REMOTE

QUANTITY

TURBIDITY

PRESSURE / VACUUM

MOISTURE/MALFUNCTIONM

CURRENT

POWER

TIME

LEVEL

INSTRUMENTATION DEVICE SCHEDULE

ALARM

CONTROL

PRIMARY ELEMENT

HIGH

GLASS/GAUGE

MEASURED

VOLTAGE

DENSITY DIFFERENTIAL

CHLORINE

ANALYSIS

VARIABLE

FLOW RATE

HAND

BURNER

DELAY

FIRST LETTER

DISPLAY OR

OUTPUT FUNCTION

SUCCEEDING LETTERS

CIVIL LEGEND ABBREVIATIONS LEGEND

NEW EXPOSED WIRING IN RACEWAY

NEW WIRING CONCEALED IN CEILING, WALL OR

UNDERGROUND

BRANCH CIRCUIT HOMERUN TO PANEL, NUMBER OF

ARROWS = NUMBER OF RACEWAYS. ALPHA-NUMERIC

DESIGNATION = PANEL - CIRCUIT #

CONDUIT TURNING DOWN

CONDUIT TURNING UP

DUPLEX RECEPT. MOUNTED AT ABOVE COUNTER

(COORDINATE WITH FURNITURE PROVIDER), NUMBER =

CIRCUIT # IN LOCAL 120/208V PANEL

RECEPTACLE W/ INTEGRAL GROUND FAULT CIRCUIT

INTERRUPTER MOUNTED AT 18" A.F.F., NUMBER =

CIRCUIT # IN LOCAL 120/208V PANEL

RECEPTACLE W/ INTEGRAL GROUND FAULT CIRCUIT

INTERRUPTER, AND WEATHERPROOF-WHILE-IN-USE

COVERPLATE MOUNTED AT 18" A.F.F., NUMBER =

CIRCUIT # IN LOCAL 120/208V PANEL

JUNCTION BOX

MOTOR, HORSEPOWER AS INDICATED ON PLANS

EQUIPMENT DESIGNATION REFER TO GENERAL,

MECHANICAL & PLUMBING DRAWINGS FOR

SCHEDULES

FUSE

CIRCUIT BREAKER

FUSED DISCONNECT SWITCH

NON-FUSED DISCONNECT SWITCH

PULL OUT DISCONNECT

TRANSFORMER

GENERATOR

GROUND

NORMALLY OPEN CONTACT

NORMALLY CLOSED CONTACT

OVERLOAD RELAY

CONDUCTORS NOT CONNECTED

CONDUCTORS CONNECTED

DISTRIBUTION PANELBOARD, SWITCHBOARD OR

MOTOR CONTROL CENTER, SHOWN TO SCALE ON

PLANS

DISCONNECT SWITCH, TYPE AND SIZE AS INDICATED

ON DRAWINGS

HEAT TRACE POWER CONNECTION KIT

CONTROL STATION (TYPE AS SHOWN)

PHOTO CELL

ELECTRICAL SYMBOL LEGEND

LP1-14

A,13,b

EXISTING EXPOSED WIRING IN RACEWAY

EXPLOSION PROOFXP

WASTEWATER P&ID LEGEND

GATE VALVE

CHECK VALVE

BUTTERFLY VALVE

BALL VALVE

PLUG VALVE

EXISTING PIPING

NEW PIPING

E VALVE W/ ACTUATOR

E - ELECTRIC

P - PNEUMATIC

KNIFE GATE VALVE

SOLENOID VALVE

Mg(OH)2

PIPING DOWN

PIPING UP

PIPE REDUCER

CHEMICAL PIPING

ELECTRICAL SIGNALS

(ANALOG & DIGITAL)

SCADA SYSTEM COMM. LINK

(RADIO, DATA HIGHWAY)

FIBER OPTIC CABLE

F.O.

AIR PIPING

INSTRUMENTATION

AIR TUBING

AIR RELEASE VALVE

BACK PRESSURE

SUSTAINING VALVE

RELIEF VALVE

PIPING NOT CONNECTED

INSTRUMENTATION /

SENSOR

ULTRASONIC SENSOR

RADAR SENSOR

LEVEL (FLOAT) SWITCH

OIL FILLED GAUGE

PIPE TO FLOOR DRAIN

SPRAY NOZZLES

WATER SURFACE

MOTOR

GAUGE WITH DIAPHRAM

FLEX COUPLER

FE-XX

0-XXX GPM

INLINE "FLOW ELEMENT" METER

SLIDE GATE

CENTRIFUGAL PUMP

XXXXXX PUMP

PRESSURE

DIAPHRAGM

JB JUNCTION BOX

PLUMBING / HVAC SYMBOL LEGEND

MANUAL MOTOR STARTER

OS CEILING MOUNTED WIRELESS MOTION SENSOR

OS CORNER MOUNTED WALL WIRELESS MOTION SENSOR

LUMINAIRE, TYPE AS INDICATED ON LUMINAIRE

SCHEDULE ON SHEET E-501. LETTER = LUMINAIRE TYPE,

NUMBER = CIRCUIT IN LOCAL 120/208V PANEL, lower case letter = SWITCH DESIGNATION

DUPLEX RECEPT. MOUNTED AT 18" A.F.F. UNLESS

OTHERWISE NOTED, NUMBER = CIRCUIT # IN LOCAL

120/208V PANEL

S3b LIGHTING SWITCH - NUMBER (WHERE USED) INDICATES SWITCH TYPE (3 = 3-WAY, ETC...), lower case letter

MATCHES CONTROLLED FIXTURES

A,13,b

BTUH BRITISH THERMAL UNITS PER HOUR

CFU COLD WATER FIXTURE UNITS

DCW DOMESTIC COLD WATER

DHW DOMESTIC HOT WATER

DTW DOMESTIC TEMPERED WATER

DTWR DOMESTIC TEMPERED WATER RETURN

DN DOWN

EAT ENTERING AIR TEMPERATURE

EXH EXHAUST

EF EXHAUST FAN

ESP EXTERNAL STATIC PRESSURE

EXIST EXISTING

GPM GALLONS PER MINUTE

HFU HOT WATER FIXTURE UNITS

MAU MAKE-UP AIR UNIT

MBH 1000 BTUH

OA OUTSIDE AIR

RA RETURN AIR

SA SUPPLY AIR

SAN SANITARY

SQFT SQUARE FEET

SAN

PROCESS & INSTRUMENTATION SYMBOL SCHEDULE

LCS-X

LOCAL

CONTROL

STATION

SP-X

XX GPM @

XX FT TDH - X HP

XXX-3-60

EQUIPMENT LOCAL

CONTROL STATION

SUBMERSIBLE PUMP

PINCH VALVE

0-15

PSI

SUBMERSIBLE PUMP

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\G-002.dwgLa st

E di te d by : e m ot te r

G-002

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

D R

G L

D S, S

A N

D A

N S

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\G-101.dwgLa st

E di te d by : e m ot te r

G-101

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

SCALE:1 1" = 10'-0"

AERIAL SITE PLAN - EXISTING CONDITIONS

00 10' 20'

G C

O N

S G

R T

350 kW

EMERGENCY

GENERATOR

SCALE:3 1/4" = 1'-0"

LOWER LEVEL FLOOR PLAN

4' 8'2'0

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\G-102.dwgLa st

E di te d by : e m ot te r

G-102

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

CLASSIFIED DIVISION 1

HAZARD AREA

DRAWING LEGEND

CLASSIFIED DIVISION 2

HAZARD AREA

UNCLASSIFIED

NFPA 820 CLASSIFICATION

, S

S, L

SCALE:1 3/8" = 1'-0"

OPERATING LEVEL FLOOR PLAN

4'2'1'0

SCALE:2 1/4" = 1'-0"

INTERMEDIATE LEVEL FLOOR PLAN

4' 8'2'0

WET WELL AREA

NEC CLASSIFIED AREA

(CLASS 1, DIV. 1

GROUP D W/ HIGH HUMIDITY)

ELECTRICAL ROOM

UNCLASSIFIED

WET WELL AREA

NEC CLASSIFIED AREA

(CLASS 1, DIV. 1

GROUP D W/ HIGH HUMIDITY)

DRY WELL / PUMP ROOM

UNCLASSIFIED

DRY WELL / PUMP ROOM

UNCLASSIFIED

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\G-601.dwgLa st

E di te d by : p m cc ar ty

G-601

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

IP-2

1200 GPM @

241.8 FT TDH - 135 HP

460-3-60

SCALE:1 NONE

PROCESS AND INSTRUMENTATION DIAGRAM

U M

N D

IP1

HOAHS

IP2

HOA

350 kW

GENERATOR

IP-1

1200 GPM @

241.8 FT TDH - 135 HP

460-3-60

IP-1

IP-2

PCP

AE-2

(O2)

AE-1

(H2S)

AIT

AE-3

(METHANE)

LE-2

(0-20FT)

LIT

METHANE

0-20%

NORM. 0%

LE-2

(0-20FT) AIT

O2 0-24%

NORM.

20-21%

H2S

0-10 PPM

SCALE:1 1/4" = 1'-0"

OPERATING LEVEL FLOOR PLAN

4' 8'2'0

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\GED-401.dwgLa st

E di te d by : e m ot te r

GED-401

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

N D

O N

N S, K

D P

H O

H S

SCALE:2 1/4" = 1'-0"

INTERMEDIATE LEVEL FLOOR PLAN

4' 8'2'0

SCALE:3 1/4" = 1'-0"

LOWER LEVEL FLOOR PLAN

4' 8'2'0

- GENERAL / MECHANICAL

DEMOLITION KEYNOTES

- ELECTRICAL / CONTROL

DEMOLITION KEYNOTES

A. REMOVE EXISTING INFLUENT PUMP IN ITS ENTIRETY.

SCALE:A NO SCALE

GENERATOR

EXIST. 200 kW

SCALE:B NO SCALE

EXIST. PCP

SCALE:C NONE

SELECTIVE DEMO.

PANEL 'DP'

SCALE:D NO SCALE

EXIST. PUMP IP-2

SCALE:J NO SCALE

EXIST. PUMP IP-1

A. DISCONNECT AND REMOVE VENDOR-PROVIDED POWER AND CONTROL

WIRING FROM PUMPS TO BE DEMOLISHED. EXISTING PATHWAYS

SHALL BE MODIFIED AS REQUIRED AND REUSED FOR NEW EQUIPMENT.

B. DISCONNECT AND PULL BACK OVERHEAD POWER AND CONTROL

WIRING FROM EXISTING GENERATOR TO BE REMOVED. EXISTING

RACEWAYS SHALL BE MODIFIED AS REQUIRED AND REUSED FOR NEW

MACHINE.

C. EXISTING GENERATOR/ENCLOSURE/FUEL TANK SHALL BE

DISCONNECTED AND REMOVED IN IT'S ENTIRETY.

D. INDIVIDUAL POWER FEEDS FROM PANEL 'DP' SHALL BE REPLACED

WITH UPRATED WIRING. DISCONNECT AND REMOVE EXISTING WIRING

AND CIRCUIT BREAKERS OR TRIP UNITS FROM PANEL 'DP' TO PUMP

CONTROL PANEL TO BE DEMOLISHED. CLEAN AND PREP ABANDONED

SPACE WITHIN PANEL 'DP' TO RECEIVE NEW BRANCH CIRCUIT

BREAKERS OR UPRATED TRIP UNITS.

E. DISCONNECT AND PULL BACK POWER AND CONTROL WIRING FROM

EXISTING SELF-CONTAINED PUMP CONTROL PANEL TO BE REMOVED.

EXISTING OVERHEAD RACEWAYS SHALL BE MODIFIED AND REUSED TO

THE FULLEST EXTENT POSSIBLE. EXISTING FLOOR PENETRATIONS

AND PATHWAYS TO PUMPS SHALL BE REUSED FOR NEW

VENDOR-PROVIDED PUMP CABLES. PROVIDE WIREWAY TO INTERCEPT

EXISTING EMBEDDED RACEWAYS.

F. EXISTING PUMP CONTROL PANEL SHALL BE DISCONNECTED AND

REMOVED IN IT'S ENTIRETY.

G. EXISTING BRANCH CIRCUIT WIRING TO ROOF FAN SHALL BE REMOVED

FROM PANEL 'DP', MODIFIED AND EXTENDED TO SERVE NEW ROOF

FAN FROM PANEL 'GP'. ABANDONED 3P/20A BRANCH BREAKER SHALL

BE RELABELED AS 'SPARE'.

H. REMOVE EXISTING BUS COVER PLUGS TO ALLOW BRANCH CIRCUIT

BREAKER ADDITIONS PER SHEET E-601.

J. EXISTING ULTRASONIC LEVEL TRANSMITTER SHALL BE

DISCONNECTED AND REMOVED. PREPARE ABANDONED LOCATION

FOR INSTALLATION OF NEW UNIT.

K. DISCONNECT AND REMOVE EXISTING HATCH LIMIT SWITCHES.

EXISTING WIRING SHALL BE MODIFIED AND EXTENDED TO CONNECT

TO REPLACEMENT UNITS.

L. EXISTING LEVEL TRANSDUCER SHALL BE DISCONNECTED AND

REMOVED. EXISTING CABLE FITTINGS SHALL BE REPLACED WITH NEW,

SIZED PER NEW CONDUCTIVITY-BASED LEVEL INSTRUMENT.

E F D

A A

SCALE:F NONE

SELECTIVE DEMO.

PANEL 'GP'

H H

SCALE:G NONE

FLOWMETER

SCALE:H NONE

SWITCH (TYP. FOR 2)

HATCH LIMIT

SCALE:E NONE

SENDER CABLE

LEVEL

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\C-101.dwgLa st

E di te d by : e m ot te r

C-101

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

SCALE:1 1" = 10'-0"

FACILITY SITE PLAN

00 10' 20'

R T

350 kW

EMERGENCY

GENERATOR

B S-101

5'-9"

7"7"

1'-2"

PIER

1'-6"1'-6"

3'-0"

FOUNDATION

7" 7" 1'

-2

1' -6

-6 " 3'

-0

N D

-KNEE BRACE-

HSS 4 x 4 x 1/4

BASE PLATE BP-1.

FOR DETAILS, REFER TO 2

S-101

A S-101

9'-0"

-EMERGENCY GENERATOR FOUNDATION-

(W/ FUEL TANK & ENCLOSURE)

7'-8"

5' -1

'-0

-E

C Y

O R

F O

U N

W / F

R E-

-EXISTING (6') HIGH CHAIN LINK FENCE-

2'-1 5/8"

1' -1

NOTES: 1.) ANCHOR EMERGENCY GENERATOR/FUEL TANK/ENCLOSURE TO FOUNDATION PER MANUFACTURERS RECOMMENDATIONS.

2.) CONTRACTOR SHALL VERIFY CONDUIT ENTRANCE LOCATION AND CONDUIT ARRANGEMENT.

3.) CONCRETE ENCASE CONDUITS UNDER EMERGENCY GENERATOR/ENCLOSURE/FUEL TANK FOUNDATION.

4.) CONTRACTOR SHALL VERIFY FINAL FOUNDATION SIZE WITH THE MANUFACTURER.

5.) PROVIDE CUT-OUTS IN TOP SLAB AS REQUIRED FOR CONDUITS.

6.) LOCATE EMERGENCY GENERATOR/ENCLOSURE/FUEL TANK ON CENTERLINE OF FOUNDATION.

F G

A L

P P

-NOTE-

FOR INTERMEDIATE LEVEL AND LOWER LEVEL CONCRETE CRACK REPAIR LOCATIONS, REFER TO DRAWING No. D-102.

-COMPACTED-

PENNDOT 2A COARSE

AGGREGATE IN VOID.

TOP W/ MACADAM

(5) #5's EQ. SPA.

-EACH WAY-

PROVIDE TOP &

BOTTOM MATS1'-6"1'-6"

3'-0" SQ.

FOUNDATION

COMPACTED

-SUBGRADE-

5'-9"

2" C L.

3" C L.

1' -0

#3 T

5' -0

-P

11"

1'-2"

PIER

TOP OF CONC.

EL. 368.50' (REF.)

TOP OF CONC.

EL. 373.50' (REF.)

EXISTING GRADE

TOP OF MACADAM

(APPROXIMATE)

9' -6

BOTTOM OF STL. EL. 383.00' (REF.)

-KNEE BRACE HSS 4 x 4 x 1/4-

EXISTING MONORAIL BEAM S12 x 35 (REF.)

PROVIDE GUSSET/SLIT CONNECTION (FULLY WELD).

1/2" BASE PLATE

BP-1 W/ 1" GROUT.

WP.

29°

1 1/2" CL.

(TYP. ALL AROUND)

(4) #5 DOWELS.

(CORNERS).

2 1/4"

2 3/4"

1 1/4"

2 3/4"

4"4"

-BASE PLATE-

KNEE BRACE

HSS 4 x 4 x 1/4

1/ 4"

1 1/4"

8" -B

E-

3/16

BASE PL. 1/2" x 8" x 0'-8" W/

(4) 11/16"Ø HOLES FOR 5/8"Ø

HILTI HAS-R STAINLESS STEEL

THREADED RODS. DRILL &

EPOXY IN-PLACE USING

HILTI HIT-RE 500 V3 EPOXY

ADHESIVE (5 5/8" MIN. EMB.)

(6") COMP. PENNDOT 2A COARSE AGGR.

-OVER-

COMPACTED SUBGRADE

#8's @ 9 O.C. EACH WAY

(TYP. TOP/BOTTOM/SIDES)

9'-0" x 21'-0" EMERGENCY GENERATOR

FOUNDATION W/ FUEL TANK & ENCLOSURE

EMERGENCY

-GENERATOR-

W/ FUEL TANK &

ENCLOSURE

2" C L.

3" C L.

1" F

D N

L 3'

-1 1"

4' -0

" F O

U N

-E M

. G

EXISTING GRADE.

(TOP OF MACADAM)

#8 "U" BARS (SIDE).

(TYP. ALL AROUND).

1'-0"

(TYP. ALL AROUND)

3/4" CHAMFER

(TYP. ALL AROUND)

2" CL. (TYP.)

SCALE:1 3/8" = 1'-0".

OPERATING LEVEL FLOOR FOUNDATIONS & STEEL FRAMING PLAN

4'2'1'0

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\S-101.dwgLa st

E di te d by : p m cc ar ty

S-101

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

N O

G L

O R

N S

O N

D D

R U

SCALE:B 3/8" = 1'-0".

KNEE BRACE SECTION

4'2'1'0

SCALE:2 1 1/2" = 1'-0".

BASE PLATE BP-1 DETAIL

1'6"3"0

SCALE:A 3/8" = 1'-0".

EMERGENCY GENERATOR FOUNDATION SECTION

4'2'1'0

1. ALL CONCRETE REPAIR MATERIALS SHALL BE INSTALLED IN

ACCORDANCE WITH THE MANUFACTURERS SPECIFIED PROCEDURES

ON SURFACES PREPARED IN ACCORDANCE WITH THE

MANUFACTURERS SPECIFICATIONS. DEPTHS OF REPAIRS SHALL BE

THE MINIMUM DEPTHS REQUIRED BY THE MANUFACTURERS MATERIAL

SPECS.

2. REPAIR METHOD 1 (RPM1) : CRACK REPAIR.

A. PREPARE AND CLEAN THE SURFACE.

B. ROUTE THE CRACK TO MINIMUM SIKA DIMENSIONS FOR 1A

SEALANT INSTALL.

C. SEAL ENTIRE CRACK WITH SIKAFLEX 1A.

CRACK REPAIR NOTES RPM-1

1. ALL CONCRETE REPAIR MATERIALS SHALL BE INSTALLED IN

ACCORDANCE WITH THE MANUFACTURERS SPECIFIED PROCEDURES

ON SURFACES PREPARED IN ACCORDANCE WITH THE

MANUFACTURERS SPECIFICATIONS. DEPTHS OF REPAIRS SHALL BE

THE MINIMUM DEPTHS REQUIRED BY THE MANUFACTURERS MATERIAL

SPECS.

2. CRACK REPAIR:

A. PREPARE AND CLEAN THE SURFACE.

B. ROUTE THE CRACK TO MINIMUM SIKA DIMENSIONS FOR 1A

SEALANT INSTALL.

C. INSTALL INJECTION PORTS (6”) WITH EPOXY.

D. FLUSH THE DRILLED HOLES WITH WATER TO REMOVE

DEBRIS/DUST FROM PORTS.

E. INJECT SIKAFIX HH LV IN ACCORDANCE WITH MANUFACTURERS

SPECIFICATIONS.

F. REMOVE PORTS AND FILL PORT HOLE WITH SIKADUR 31, HI MOD

GEL.

G. SEAL ENTIRE CRACK WITH SIKAFLEX 1A.

CRACK REPAIR NOTES RPM-2

A 8'-0"

1'-0"

AREA

(LETTER) TOTAL LENGTH OF CRACK

C 4'-0"

3'-0"

6'-0"

3'-0"

4'-0"

5'-0"

7'-0"

5'-0"

8'-0"

5'-0"

3'-0"

5'-0"

NOTE: ALL CRACKS SHALL BE REPAIRED

USING RPM-1 UNLESS NOTED OTHERWISE.

VERTICAL CRACKS, EFFLORESCENCE, AND

CORNER CRACKS SHALL BE REPAIRED

USING RPM-2. THIS DRAWING SHALL BE

WORKED IN CONJUNCTION WITH DRAWING

No. D-102.

SHEET KEYNOTES

1. SALVAGE EXISTING ONE (1) TON HOIST AND RETURN TO OWNER.

PROVIDE A NEW TWO (2) TON RATED HOIST WITH SIMILAR CHAIN

LENGTH AS TO MATCH THE EXISTING CHAIN.

R T

350 kW

EMERGENCY

GENERATOR

SCALE:1 3/8" = 1'-0"

OPERATING LEVEL FLOOR PLAN

4'2'1'0

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\D-101.dwgLa st

E di te d by : p m cc ar ty

D-101

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

N O

G L

O R

N A

N D

N O

S M

A D-301

AIT-1

LIT-1

AIT-2

X S

U X T

X V

SCALE:1 3/8" = 1'-0"

INTERMEDIATE LEVEL FLOOR PLAN

4'2'1'0

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\D-102.dwgLa st

E di te d by : p m cc ar ty

D-102

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

A N

D L

O W

O R

N S

N O

S M

SCALE:2 3/8" = 1'-0"

LOWER LEVEL FLOOR PLAN

4'2'1'0

IP-1IP-2

NOTE: ALL CRACKS SHALL BE REPAIRED USING RPM-1 UNLESS NOTED

OTHERWISE. VERTICAL CRACKS, EFFLORESCENCE, AND CORNER CRACKS SHALL

BE REPAIRED USING RPM-2. FOR RPM-1 AND RPM-2 CRACK REPAIR PROCEDURES,

REFER TO NOTES ON DRAWING No. S-101.

A D-301

AREA

(LETTER) TOTAL LENGTH OF CRACK

S 9'-0" (V. EFFLORESCENCE)

T 1'-0" (EFFLORESCENCE)

U 1'-0" (VERTICAL)

V 6'-0" (VERTICAL)

4" FLANGE ADAPTER

(TYP. 2 PLCS.)

8" FLANGE ADAPTER

(TYP. 2 PLCS.)

AE-1 (H2S)

AE-2 (O2)AE-3 (METHANE)

LE-2

SHEET KEYNOTES

1. LINER TESTING AND INSPECTION SHALL BE PREFORMED IN

ACCORDANCE WITH THE MANUFACTURER'S CURRENT

RECOMMENDATIONS, INSTALLATION REQUIREMENTS AND TECHNICAL

LITERATURE APPLICABLE TO THE PRODUCTS FURNISHED AND

INSTALLED.

SCALE:A 3/8" = 1'-0"

PUMP STATION SECTION VIEW

4'2'1'0

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\D-301.dwgLa st

E di te d by : e m ot te r

D-301

EJM

PDM

EDM

AS NOTED

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

N S

O N

D N

O C

IP-1

8" 90° BEND SUPPLIED BY VENDOR

LOWER LEVEL

/ DRY WELL

LOWER LEVEL

/ WET WELL

SUPPLY AIR DUCTWORK,

EXIST. 12" X 24"

MIDDLE LEVEL

/ DRY WELL

MIDDLE LEVEL

/ WET WELL

SUPPLY AIR DUCTWORK,

EXIST. 12" X 24"

EXIST. INTAKE LOUVER

CONTROL LEVEL

/ DRY WELL

GRADE

/ WET WELL

EXIST. DAMPER

SUPPLY AIR DUCTWORK,

EXIST. 12" X 24"

EXISTING INTAKE

PENTHOUSE

EXIST. E-GEN PAD

GRADE

/ WET WELL

EXIST. INTAKE LOUVER

EXIST. E-GEN PAD

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\MD-101.dwgLa st

E di te d by : b w er tz

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

CRS

BLW

AS NOTED

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

8'4'2'1'0

N D

O N

N S, S

N S, K

D P

H O

H S

SCALE:1 3/16" = 1'-0"

OPERATING LEVEL DEMOLITION PLAN

8'4'2'1'0

DEMOLITION KEYNOTES

A. DISCONNECT AND REMOVE UNIT HEATER AND WALL MOUNT.

B. DEMOLISH DAMPER AND ACTUATOR. EXTERIOR LOUVER SHALL

REMAIN.

C. DISCONNECT AND REMOVE EXISTING EXHAUST FAN, AND BACKDRAFT

DAMPER. EXISTING ROOF CURB AND DUCTWORK SHALL REMAIN FOR

RECONNECTION.

D. DEMOLISH EXISTING 16" X 10" EXHAUST GRILLE. EXISTING EXHAUST

DUCTWORK SHALL REMAIN FOR REUSE.

SCALE:3 3/16" = 1'-0"

LOWER LEVEL DEMOLITION PLAN

8'4'2'1'0

SCALE:2 3/16" = 1'-0"

MIDDLE LEVEL DEMOLITION PLAN

8'4'2'1'0

SCALE:B 3/16" = 1'-0"

WEST ELEVATION VIEW

8'4'2'1'0

SCALE:A 3/16" = 1'-0"

NORTH ELEVATION VIEW

MD-101

EUH

DRY WELL FAN

INDICATION

LIGHTS.

E-GEN

CONTROL LEVEL

/ DRY WELL

SUPPLY AIR DUCTWORK,

EXIST. 12" X 24"

GRADE

/ WET WELL

INSULATED WALL PANEL

EXIST.

LOUVER

GRAVITY DAMPER

EUH

MIDDLE LEVEL

/ DRY WELL 3

MIDDLE LEVEL

/ WET WELL

SUPPLY AIR DUCTWORK,

EXIST. 12" X 24"

EXISTING INTAKE

PENTHOUSE

EXIST. E-GEN PAD

GRADE

/ WET WELL

EUH

LOWER LEVEL

/ DRY WELL

LOWER LEVEL

/ WET WELL

SUPPLY AIR DUCTWORK,

EXIST. 12" X 24"

EXIST. LOUVER

EXIST. E-GEN PAD

EXHAUST FAN AND

DAMPER BEHIND LOUVER

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\M-101.dwgLa st

E di te d by : b w er tz

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

CRS

BLW

AS NOTED

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

N F

R P

S, S

O N

D N

8'4'2'1'0

SCALE:1 3/16" = 1'-0"

OPERATING LEVEL FLOOR PLAN

8'4'2'1'0

SCALE:2 3/16" = 1'-0"

MIDDLE LEVEL FLOOR PLAN

8'4'2'1'0

SCALE:B 3/16" = 1'-0"

WEST ELEVATION VIEW

M-101

SHEET KEYNOTES

1. PROVIDE EXHAUST FAN MOUNTED IN UPPER WEST CORNER BEHIND

LOUVER. MOUNT HOA ON ACCESSIBLE WALL ADJACENT TO FAN.

2. PROVIDE BLANK INSULATED (R-13 OR GREATER) METAL PANELS TO

COVER REMAINING OPENING ADJACENT TO EXHAUST FAN.

3. PROVIDE ELECTRIC UNIT HEATER (EUH) AND MOUNT IN SAME

LOCATION AS EXISTING, MATCH EXISTING EUH HEIGHT FROM FLOOR.

4. PROVIDE 10" x 16" OPERATING ALUMINUM REGISTERS WITH

BALANCING DAMPERS AT EACH FLOOR LEVEL (3), TITUS MODEL 301FS

WITH OPPOSED BLADE DAMPER (3) FOR BALANCING.

5. PROVIDE SUPPLY FAN WITH GRAVITY DAMPER. PROVIDE ROOF CURB

ADAPTER AND RECONNECT TO EXISTING DUCTWORK.

8'4'2'1'0

SCALE:3 3/16" = 1'-0"

LOWER LEVEL FLOOR PLAN

8'4'2'1'0

SCALE:A 3/16" = 1'-0"

NORTH ELEVATION VIEW

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\M-501.dwgLa st

E di te d by : e m ot te r

M-501

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

CRS

BLW

AS NOTED

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

N D

, S

C H

N O

1. PIPING AND DUCTWORK SHOWN IS GENERALLY DIAGRAMMATIC AND

INDICATES THE WORK TO BE PERFORMED. NOT ALL FITTINGS AND

OFFSETS ARE SHOWN. FOLLOW DRAWINGS AS CLOSELY AS FIELD

CONDITIONS ALLOW.

2. DUCTWORK DIMENSIONS INDICATED ARE NET INSIDE (AIRSIDE)

DIMENSIONS. ON LINED DUCTWORK, INCREASE SHEET METAL

DIMENSIONS TO ALLOW FOR INSULATION THICKNESS.

3. PROVIDE ALL MISCELLANEOUS STEEL SHAPES, HANGER RODS,

STRAPS, ETC. REQUIRED FOR ALL MECHANICAL SYSTEM

INSTALLATIONS.

4. ALL CUTTING AND PATCHING REQUIRED TO ACCOMMODATE THE HVAC

WORK SHALL BE PROVIDED UNDER THE HVAC SPECIFICATIONS.

GENERAL MECHANICAL NOTES

FAN SCHEDULE

DRIVE

DIRECT

TYPE

AXIAL ROOF SUPPLY

ITEM

NO.

SF-1 ROOF

MOUNTING

0.251400

CFM ESP

(WC)

GREENHECK

MANUFACTURER

RPM

FAN

208/1/60

VOLTAGE

AS-14-428-A4

BASIS OF DESIGN

MODEL

1, 2, 3

NOTE

1.0DRY WELL

SERVICE

NOTES:

1. PROVIDED WITH SPEED CONTROLLER.

2. PROVIDE LOCAL DISCONNECT SWITCH.

3. PROVIDE CURB ADAPTER, GRAVITY DAMPER, AND BIRD SCREEN.

4. PROVIDE HOA SWITCH, WALL HOUSING, GRAVITY DAMPER, AND GUARD.

MOTOR

MANUFACTURER

BASIS OF DESIGN

MOTOR NOTES

MODELNO.

ITEM

ELECTRIC UNIT HEATER SCHEDULE

VOLTAGEHEATING

OUTPUT

TYPE THROW

(FEET)SOURCE

ENERGY CFM

NOTES:

1. PROVIDED WITH EPOXY FINISH ON ALL EXPOSED SURFACES.

2. PROVIDED WITH INTEGRAL DISCONNECT SWITCH.

3. PROVIDE INTEGRAL THERMOSTAT.

4. PROVIDE WALL MOUNTED, UNIVERSAL BRACKET.

DIRECTSIDEWALL EXHAUSTEF-1 WALL 1200 0.125 1725 460/3/60 AER-24-VG1.0DRY WELL GREENHECK

AMPS

FULL LOAD

EUH-1 1/15ELECTRIC10 KW 480/3/60HORIZONTAL 27 CHROMALOX LUH-10-43-32 1, 2, 3, 485012.9

EUH-2 1/15ELECTRIC10 KW 480/3/60HORIZONTAL 27 CHROMALOX LUH-10-43-32 1, 2, 3, 485012.9

1, 2, 4

EUH-3 1/15ELECTRIC10 KW 480/3/60HORIZONTAL 27 CHROMALOX LUH-10-43-32 1, 2, 3, 485012.9

SCALE:1 NONE

ROOF MOUNTED SUPPLY FAN

LOW LEAKAGE GRAVITY DAMPER

EXIST. CURB

DRIP EDGE

FAN HOUSING

WITH BIRDSCREEN

SECURE FAN TO CURB

W/ FASTENERS 10" O.C.

ALL AROUND

ALUMINUM CURB CAP

NEOPRENE SEALING GASKET

EXISTING ROOF CONSTRUCTION

SUPPORTING STEEL

ACCESS DOOR

DUCT

DEMOLITION KEYNOTES

A. EXISTING EMERGENCY GENERATOR SHALL BE DISCONNECTED AND

REMOVED. PRESERVE EMBEDDED RACEWAY TO THE FULLEST EXTENT

POSSIBLE DURING NEW FOUNDATION WORK.

B. DISCONNECT AND REMOVE EXISTING 3P/225A BRANCH BREAKERS

FROM EXISTING PANEL. CLEAN AND PREP ABANDONED SPACES FOR

INSTALLATION OF UP-RATED BREAKERS. EXISTING BRANCH CIRCUIT

WIRING SHALL BE USED TO PULL IN UP-SIZED WIRING AS SHOWN ON

SHEET E-601.

C. DISCONNECT AND REMOVE EXISTING PUMP CONTROL ENCLOSURE.

TAKE CARE TO MAINTAIN INTEGRITY OF RACEWAYS TO BE CONNECTED

TO REPLACEMENT EQUIPMENT. EXISTING FLOOR PENETRATIONS

SHALL BE REUSED TO FEED NEW PUMPS AND EQUIPMENT.

D. WIRING FROM ROOF SHALL BE DISCONNECTED AND REWORRKED TO

POWER NEW ROOF FAN AT 208V, SINGLE-PHASE FROM PANEL 'GP'.

E. OPEN COVER SPACE, CLEAN AND PREP FOR INSTALLATION OF NEW

BRANCH BREAKER THIS AREA.

Scale:1 none

EXISTING ONE LINE DIAGRAM (DEMO)

G O

N E

E D

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\ED-601.dwgLa st

E di te d by : n pi ls to n

ED-601

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

DEM

NEP

AS NOTED

GENERAL SHEET NOTES

G kWH

C C

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

PUMP CONTROL

PANEL

PUMP #1 SOFT

STARTER 1A

1E 1F

1H6

350kW DIESEL

GENERATOR 1 2

EUH

EF-1 HOA

ENCLOSURE 8

AIT

131M

ENTRY ALERT

STATION 'EAS-2'12 1L

ENTRY ALERT

STATION 'EAS-1'12 1J

NEW LEFT HATCH

LIMIT SWITCH151W

NEW CTR. HATCH

LIMIT SWITCH151Z

FAN MOUNTED ON

ROOF, THIS AREA

PUMP #2 SOFT

STARTER 1C32

AIT

13 1AC1AB

EUH

161F

141AD

EUH

141Q

14 1R

N P

NOTES:

1. REFER TO G-601 FOR GRAPHIC INSTRUMENT DIAGRAM

2. COORDINATE W/APPROPRIATE EQUIPMENT MANUFACTURER BEFORE

CONNECTING COMPONENT

3. S.T.P = SHIELDED TWISTED PAIR

4. V.S.C. = VENDOR SUPPLIED CABLE

5. #14AWG = #14 AWG, THHN INSULATED COPPER CONDUCTORS.

* = EXPOSED RACEWAY ONLY, 1 INCH MINIMUM EMBEDDED SIZE.

** = CONDUCTORS CONTINUED FROM VENDOR SUPPLIED PUMP CABLE.

DATA/CONTROL SCHEDULE

1A** PMP #1 S.S. PCP #14AWG 12 3/4"

1C** PMP #2 S.S. PCP #14AWG 12 3/4"

1E W.WELL JB PCP #14AWG 12 3/4"

1F W.WELL JB PCP V.S.C. 1 3/4"

1H A.T.S. PCP #14AWG 6 3/4"

1J EAS-1 AIT-1 #14AWG 3 3/4"

1L EAS-2 AIT-1 #14AWG 3 3/4"

1M AIT-1 PCP #14AWG 6 3/4"

1P AIT-1 PCP STP 2 3/4"

1Q AE-1 AIT-1 STP 2 3/4"

1R AE-2 AIT-1 STP 2 3/4"

1V LEFT LS STR-1 #14AWG 2 3/4"

1W LEFT LS PCP #14AWG 2 3/4"

1Y CTR. LS STR-1 #14AWG 2 3/4"

1Z CTR. LS PCP #14AWG 2 3/4"

1AB AIT-2 PCP #14AWG 6 3/4"

1AC AIT-2 PCP STP 2 3/4"

1AD AE-3 AIT-2 STP 2 3/4"

KEYNOTE FROM TO CABLE No. OF RACEWAY

TYPE CABLE SIZE *

1. PROVIDE NEW DIESEL-FIRED EMERGENCY GENERATOR, IN WEATHERTIGHT

ENCLOSURE, WITH 24-HOUR, SUB-BASE FUEL TANK, PER APPLICABLE

SPECIFICATION SECTION. COORDINATE WITH G.C. FOR THEIR PROVISION

OF NEW FOUNDATION. MODIFY/EXTEND EXISTING ANCILLARY POWER AND

CONTROL WIRING TO REACH EXISTING A.T.S.

2. VENDOR-PROVIDED SUBMERSIBLE PUMP CABLES SHALL BE ROUTED TO

RESPECTIVE STARTERS, AS SPECIFIED ON SHEET E-601.

3. PROVIDE NEMA 1, SOLID STATE SOFT STARTERS, MOUNTED IN

APPROXIMATE LOCATION SHOWN - FOR CONTROL OF NEW PUMPS.

PROVIDE UPRATED CIRCUITS SHOWN ON SHEET E-601 FROM EXISTING

PANEL 'DP' TO RESPECTIVE SOFT STARTER. PROVIDE CONTROL WIRING

SHOWN.

4. INSTALL NEW PUMP CONTROL PANEL, FURNISHED BY SYSTEM

INTEGRATOR, IN APPROXIMATE LOCATION SHOWN. PROVIDE WIRING PER

CONTROL WIRING SCHEDULE (THIS SHEET). TERMINATE IN 'PCP' PER

SYSTEM INTEGRATOR'S WRITTEN INSTRUCTIONS.

5. PROVIDE NEW CONTROL WIRING SHOWN TO EXISTING WETWELL FLOAT

SWITCH/INSTRUMENT JUNCTION BOX. TERMINATE PER SYSTEM

INTEGRATOR'S WRITTEN INSTRUCTIONS. NEW FOGROD CABLE SHALL BE

ORDERED TO LENGTH TO REACH PCP.

6. PROVIDE NEW CONTROL WIRING SHOWN, IN MODIFIED/EXTENDED

RACEWAY FROM EXISTING AUTOMATIC TRANSFER SWITCH, TO NEW PUMP

CONTROL PANEL. TERMINATE PER SYSTEM INTEGRATOR'S WRITTEN

INSTRUCTIONS.

7. PROVIDE MODIFICATIONS WITHIN EXISTING DISTRIBUTION PANELS AS

SPECIFIED ON SHEET E-601.

8. PROVIDE 8" X 8" X 4"DP. NEMA 3R BOX, CONTAINING VENDOR-FURNISHED

HOA CONTROLLER. CONNECT PER MANUFACTURER'S INSTRUCTIONS.

PROVIDE 120V POWER CIRCUIT AS SHOWN ON SHEET E-601.

9. MODIFY AND EXTEND EXISTING WIRING TO SERVE NEW, ROOF-MOUNTED

FAN AT 208V, SINGLE-PHASE. REFER TO SHEET M-101 FOR FAN

LOCATTION. CONNECT TO CIRCUIT SHOWN ON PANEL 'GP' SCHEDULE ON

SHEET E-601.

10. DISCONNECT AND PULL BACK WIRING FROM (3) ELECTRIC UNIT HEATERS

TO BE REPLACED IN KIND, IN ORIGINAL LOCATIONS. RECONNECT EXISTING

WIRING TO NEW EQUIPMENT.

11. PROVIDE POWER WIRING TO FAN 'EF-1' PER SHEET E-601.

12. PROVIDE SINGLE, PUSH-TO-TEST RED PILOT LIGHT, IN NEMA 4X

ENCLOSURE 'ENTRY ALERT STATION', ADJACENT TO EACH DOOR AS

SHOWN. PROVIDE CONTROL WIRING SHOWN TO AUX. CONTACTS OF

HAZARDOUS GAS TRANSMITTER TO WARN OF HAZARDOUS ENVIRONMENT

PRIOR TO PUMP STATION ENTRY.

13. CONNECT HAZARDOUS GAS TRANSMITTER PER MANUFACTURERS

INSTRUCTIONS TO POWER CIRCUIT SHOWN ON PANEL SCHEDULE ON

SHEET E-601. PROVIDE CONTROL WIRING SHOWN TO PLC.

14. CONNECT HAZARDOUS GAS DETECTOR TO TRANSMITTER PER

MANUFACTURERS INSTRUCTIONS. PROVIDE CONTROL WIRING SHOWN.

15. PROVIDE NEW LIMIT SWITCHES AT WETWELL HATCHES, TO REPLACE

FAILED EQUIPMENT. PROVIDE CONTROL WIRING SHOWN. CONNECT N.O.

CONTACT TO CLOSE STARTER UPON HATCH OPENING, AND N.C. CONTACT

TO INDICATE STATUS TO PLC. NEW LIMT SWITCHES SHALL BE AS

MANUFACTURED BY EATON, MODEL #10316, WITH ROLLER ACTUATOR ARM,

OR APPROVED EQUAL.

16. INSTALL NEW LEVEL INSTRUMENT CABLE, FURNISHED BY EQUIPMENT

SUPPLIER AS SHOWN. PROVIDE APPROPRIATELY-SIZED AND RATED CGB

FITTING IN ACCESS PLATE, AND CONTINUE TO PCP PER SHEET KEYNOTE

#5.

17. NOT USED.

18. CONNECT LIMIT SWITCH WIRING TO EXISTING COMBINATION STARTER TO

OPERATE PER SHEET KEYED NOTE #15, ABOVE.

SHEET KEYNOTES

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\E-101.dwgLa st

E di te d by : p m cc ar ty

E-101

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

DEM

NEP

AS NOTED

SCALE:1 1/4" = 1'-0"

OPERATING LEVEL FLOOR PLAN

4' 8'2'0

GENERAL SHEET NOTES

1. REFER TO DRAWING G-001 FOR GENERAL PROJECT NOTES, DRAWING

CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

SCALE:2 1/4" = 1'-0"

MIDDLE LEVEL FLOOR PLAN

4' 8'2'0

SCALE:3 1/4" = 1'-0"

LOWER LEVEL FLOOR PLAN

4' 8'2'0

SHEET KEYNOTES-

Scale:1 none

PROPOSED ONE LINE DIAGRAM

D O

N E

E D

4185.087

2 3

1 2 3

4 5 6

PROJECT NO.

APPROVED BY:

SCALE:

CHECKED BY:

PREPARED BY:

E R

4 5

O R

DRAWING NO.

Entech Engineering - Printed: Jun. 16, 2026 H:\0004185.087\04-CAD\SheetFiles\E-601.dwgLa st

E di te d by : p m cc ar ty

E-601

W N

M U

A U

R O

U G

H O

, L

C O

U N

, P

N N

O . 1

C T

DEM

NEP

AS NOTED

GENERAL SHEET NOTES

EMERGENCY GENERATOR

EXTERIOR, DIESEL

350KW, 277/480V, 3-PHASE, 4-WIRE

G kWH

3P/ 250A

PUMP

CONTROL

PANEL

WATTS PER PHASE

936 2 15 3/4 12 12 2 ROOF FAN 'SF-1'

EF-1 CONTROL/LOUVER POWER 2 12 12 3/4" 20 1 500 936 - - - - - -

PUMP CONTROL PANEL 2 12 12 3/4" 20 1 500 1 20 - - - - SPARE

SPARE - - - - 20 1 1 20 3/4 12 12 2 GAS DETECTOR 'AIT-1'

PUMP

3P/600AF

400AT CB

SOFT

STR.

SOFT

STR.

1. PROVIDE NEW DIESEL-POWERED EMERGENCY GENERATOR WITH SUB

BASE FUEL TANK, PER APPROPRIATE SPECIFICATION SECTION, AND

CONFIGURED AS SHOWN. APPROXIMATE LOCATION OF EQUIPMENT

SHOWN ON SHEET E-101.

2. PROVIDE NEW 3P/250A BRANCH CIRCUIT BREAKERS IN EXISTING

277Y480V, THREE-PHASE, CIRCUIT BREAKER DISTRIBUTION PANEL.

NEW BREAKERS SHALL BE OF COMPATIBLE STYLE AND MANUFACTURE

TO EXISTING EQUIPMENT.

3. PROVIDE NEW, NEMA 1 ENCLOSED, SOLID STATE SOFT STARTERS,

CAPABLE OF CONTROLLING 150 HORSEPOWER, SUBMERSIBLE PUMP

MOTORS, @ 480VAC. ACCEPTABLE EQUIPMENT SHALL INCORPORATE

24VDC CONTROL, AND ACCOMMODATE ETHERNET COMMUNICATIONS.

4. PROVIDE RACEWAY MODIFICATIONS NECESSARY TO ROUTE

VENDOR-PROVIDED PUMP CABLES FROM BOTTOM LEVEL TO NEW

SOFT STARTERS. CONNECT PER MANUFACTURER'S REQUIREMENTS.

5. PROVIDE (5) NEW 1P/20A BRANCH CIRCUIT BREAKERS IN EXISTING

120/208V, THREE-PHASE, CIRCUIT BREAKER DISTRIBUTION PANEL.

NEW BREAKERS SHALL BE OF COMPATIBLE STYLE AND MANUFACTURE

TO EXISTING EQUIPMENT.

6. PROVIDE NEW 3P/15A BRANCH CIRCUIT BREAKER IN EXISTING

277Y480V, THREE-PHASE, CIRCUIT BREAKER DISTRIBUTION PANEL.

NEW BREAKER SHALL BE OF COMPATIBLE STYLE AND MANUFACTURE

TO EXISTING EQUIPMENT.

7. PROVIDE NEW 2P/15A BRANCH CIRCUIT BREAKER IN EXISTING

120/208V, THREE-PHASE, CIRCUIT BREAKER DISTRIBUTION PANEL.

NEW BREAKER SHALL BE OF COMPATIBLE STYLE AND MANUFACTURE

TO EXISTING EQUIPMENT.

CONDUCTOR SIZE KEY

a. PROVIDE (4) #500kCMIL& (1) #3 GRD, 3-1/2"C

b. PROVIDE (3) #250kCMIL & (1) #4 GRD, 2 1/2"C.

c. PROVIDE (3) #12 & (1) #12 GRD, 3/4"C.

b a b

SPARE

3P/ 15A

EXHAUST

FAN

'EF-1'

5 5 c

5 5

1. REFER TO DRAWING G-001 FOR DRAWING INDEX, GENERAL PROJECT

NOTES, DRAWING CONVENTIONS AND MAPS.

2. REFER TO DRAWING G-002 FOR DRAWING LEGENDS, SYMBOLS AND

ABBREVIATIONS.

Sheets and Views

7 G-001 - SHEET

8 G-002 - Layout1

9 G-101 - Layout1

10 G-102 - Layout1

11 G-601 - Layout1

12 GED-401 - Layout1

1 C-101 - Layout1

S-101 - S-101

2 D-101 - Layout1

3 D-102 - Layout1

D-301 - Layout1

MD-101 - MD-101

M-101 - M-101

M-501 - Layout

6 ED-601 - Paper

E-101 - paper

5 E-601 - Paper

File details come from the government source that posted it. Updated Jun 17, 2026.