1-Product_and_Safety_data_sheets_and_Brochures.pdf

Phone: 1-800-369-3878 Email: Info@EnviroTechServices.com Website: EnviroTechServices.com

PRODUCT SPECIFICATION

PRODUCT INFO

Product Name AMP Product ID ETS-3101

Product Application Anti-icing, deicing, pre-wetting. Clear Roads QPL Category A3 approved product.

CHEMICAL PROPERTIES

Chemical Constituent Typical Analysis (%) Range (%)

Magnesium Chloride 18.4 17.5-19.5

Magnesium Sulfate 0.3 ≤ 0.5

Sodium Chloride 0.4 ≤ 0.5

Potassium Chloride 0.3 ≤ 0.5

Proprietary Ice Softening Additive Proprietary Proprietary

Proprietary Corrosion Inhibitor Proprietary Proprietary

Typical Analysis

GENERAL SPECIFICATIONS

Constituent Detected Level (ppm) Constituent Detected Level (ppm) Arsenic ≤ 5.00 Barium ≤ 100.00 Cadmium ≤ 0.20 Chromium ≤ 1.00 Copper ≤ 1.00 Lead ≤ 1.00 Mercury ≤ 0.05 Selenium ≤ 5.00 Zinc ≤ 10.00 Phosphorus ≤ 2500.00 Cyanide ≤ 0.20 Molybdenum ≤ 15.00

PRODUCT TESTING

TEST DESCRIPTION TEST RESULTS

Form, Color, Odor Liquid, Amber colored, Mild Specific Gravity (g/mls @ 20 °C) 1.252-1.272

Density (lbs/gal @ 20 °C) 10.448-10.615 pH (Clear Roads Test Method 4 @ 20 °C) 6.0-10.0

Corrosion Rate (NACE Standard TM0169-95, PNS Modified) ≤ 30.0

Page 1/8

Safety Data Sheet OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/24/2025 Reviewed on 04/24/2025

60.0.31

1 Identification

· Product identifier

· Trade name: AMP

· Product Code: ETS-3101

· Application of the substance / the mixture

Anti-icing, deicing, pre-wetting. Clear Roads QPL Category A3 approved product.

· Details of the supplier of the safety data sheet

· Manufacturer/Supplier:

Envirotech Services, LLC 910 54th Avenue Suite 230 Greeley, CO 80634

(970) 346-3900

· Information department: Product safety department

· Emergency telephone number: CHEMTREC: (800) 424-9300

2 Hazard(s) identification

· Classification of the substance or mixture The product is not classified, according to the Globally Harmonized System (GHS).

· Label elements

· GHS label elements Non-Regulated Material

· Hazard pictograms Non-Regulated Material

· Signal word Non-Regulated Material

· Hazard statements Non-Regulated Material

· Classification system:

· NFPA ratings (scale 0 - 4)

Health = 0 Fire = 0 Reactivity = 0

· HMIS-ratings (scale 0 - 4)

HEALTH

FIRE

REACTIVITY

Health = 0 Fire = 0 Reactivity = 0

· Other hazards

· Results of PBT and vPvB assessment

· PBT: Not applicable.

· vPvB: Not applicable.

* 3 Composition/information on ingredients

· Chemical characterization: Mixtures

· Description: Mixture of the substances listed below with nonhazardous additions.

(Contd. on page 2)

US

Page 2/8

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/24/2025 Reviewed on 04/24/2025

Trade name: AMP

(Contd. of page 1)

60.0.31

· Components:

Proprietary Corrosion Inhibitor Proprietary%

· Non-hazardous components CAS: 7732-18-5 Water Proprietary% CAS: 7786-30-3 Magnesium Chloride 17.5-19.5%

Proprietary Ice Softening Additive Proprietary% CAS: 7647-14-5 Sodium Chloride <0.5% CAS: 7487-88-9 Magnesium Sulfate <0.5% CAS: 7447-40-7 Potassium Chloride <0.5%

· Additional information:

The exact percentages of the ingredients of this mixture are considered to be proprietary and are withheld in accordance with the provisions of paragraph (i) of §1910.1200 of 29 CFR 1910.1200 Trade Secrets.

4 First-aid measures

· Description of first aid measures

· General information: No special measures required.

· After inhalation:

Generally this product does not irritate with inhalation.

If respiratory irritation occurs, consult a doctor.

· After skin contact:

Generally the product does not irritate the skin.

Wash with soap and water.

If skin irritation occurs, consult a doctor.

· After eye contact:

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

· After swallowing:

Rinse mouth out and then drink plenty of water.

Do not induce vomiting without medical advice.

If vomiting does occur, repeat fluid administration.

If irritation or discomfort occurs, consult a doctor.

· Information for doctor:

· Most important symptoms and effects, both acute and delayed

No further relevant information available.

· Indication of any immediate medical attention and special treatment needed

No further relevant information available.

5 Fire-fighting measures

· Extinguishing media

· Suitable extinguishing agents:

Product is not flammable.

Use fire fighting measures that suit the environment.

· Special hazards arising from the substance or mixture No further relevant information available.

(Contd. on page 3)

Page 3/8

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/24/2025 Reviewed on 04/24/2025

Trade name: AMP

(Contd. of page 2)

60.0.31

· Advice for firefighters

· Protective equipment:

As in any fire, wear self-contained breathing apparatus pressure demand (NIOSH approved or equivalent) and full protective gear to prevent contact with skin and eyes.

6 Accidental release measures

· Personal precautions, protective equipment and emergency procedures Avoid contact with eyes, skin, and clothing.

· Environmental precautions: Dilute with plenty of water.

· Methods and material for containment and cleaning up:

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

· Reference to other sections

See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment.

See Section 13 for disposal information.

· Protective Action Criteria for Chemicals

· PAC-1:

CAS: 7786-30-3 Magnesium Chloride 34 mg/m³ Proprietary Corrosion Inhibitor 15 mg/m³

CAS: 7487-88-9 Magnesium Sulfate 20 mg/m³

· PAC-2:

CAS: 7786-30-3 Magnesium Chloride 370 mg/m³

Proprietary Corrosion Inhibitor 240 mg/m³ CAS: 7487-88-9 Magnesium Sulfate 220 mg/m³

· PAC-3:

CAS: 7786-30-3 Magnesium Chloride 1,600 mg/m³

Proprietary Corrosion Inhibitor 1,500 mg/m³ CAS: 7487-88-9 Magnesium Sulfate 1,300 mg/m³

7 Handling and storage

· Handling:

· Precautions for safe handling No special measures required.

· Information about protection against explosions and fires: No special measures required.

· Conditions for safe storage, including any incompatibilities

· Storage:

· Requirements to be met by storerooms and receptacles: No special requirements.

· Information about storage in one common storage facility: Not required.

· Further information about storage conditions: None.

· Specific end use(s) No further relevant information available.

(Contd. on page 4)

Page 4/8

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/24/2025 Reviewed on 04/24/2025

Trade name: AMP

(Contd. of page 3)

60.0.31

8 Exposure controls/personal protection

· Additional information about design of technical systems: No further data; see section 7.

· Control parameters

· Components with limit values that require monitoring at the workplace:

Proprietary Corrosion Inhibitor TLV Long-term value: 5 mg/m³

· Additional information: The lists that were valid during the creation were used as basis.

· Exposure controls

· Personal protective equipment:

· General protective and hygienic measures:

Avoid contact with eyes, skin, and clothing.

The usual precautionary measures for handling chemicals should be followed.

Wash hands before breaks and at the end of work.

· Breathing equipment: Not required.

· Protection of hands: Not required.

· Eye protection:

Goggles recommended during refilling.

· Body protection: Not required.

9 Physical and chemical properties

· Information on basic physical and chemical properties

· General Information

· Appearance:

Form: Liquid Color: Amber colored

· Odor: Mild

· Odor threshold: Not determined.

· pH-value at 20 °C (68 °F): 6.0-10.0

· Change in condition Melting point/Melting range: Undetermined.

Boiling point/Boiling range: >100 °C (>212 °F)

· Flash point: Not applicable.

· Flammability: Not applicable.

· Decomposition temperature: Not determined.

· Ignition temperature: Product is not selfigniting.

· Danger of explosion: Product does not present an explosion hazard.

(Contd. on page 5)

Page 5/8

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/24/2025 Reviewed on 04/24/2025

Trade name: AMP

(Contd. of page 4)

60.0.31

· Explosion limits:

Lower: Not determined.

Upper: Not determined.

· Vapor pressure at 20 °C (68 °F): <23.4 hPa (<17.6 mm Hg)

· Density at 20 °C (68 °F): 1.252–1.272 g/cm³ (10.44794–10.61484 lbs/gal)

· Relative density Not determined.

· Vapor density Not determined.

· Evaporation rate Not determined.

· Solubility in / Miscibility with Water: Fully miscible.

· Partition coefficient (n-octanol/water): Not determined.

· Viscosity:

Dynamic: Not determined.

Kinematic: Not determined.

· Other information No further relevant information available.

10 Stability and reactivity

· Reactivity No further relevant information available.

· Chemical stability

· Thermal decomposition / conditions to be avoided:

No decomposition if used according to specifications.

· Possibility of hazardous reactions No dangerous reactions known.

· Conditions to avoid No further relevant information available.

· Incompatible materials: No further relevant information available.

· Hazardous decomposition products: No dangerous decomposition products known.

11 Toxicological information

· Information on toxicological effects

· Acute toxicity:

· LD/LC50 values that are relevant for classification:

CAS: 7786-30-3 Magnesium Chloride Oral LD50 >5,000 mg/kg (rat) (OECD Test Guideline 423) Dermal LD50 >2,000 mg/kg (rat) (OECD Test Guideline 402)

Proprietary Ice Softening Additive Oral LD50 25,800 mg/kg (rat)

Proprietary Corrosion Inhibitor Oral LD50 8,000 mg/kg (rat)

CAS: 7647-14-5 Sodium Chloride Oral LD50 3,000 mg/kg (rat)

(Contd. on page 6)

Page 6/8

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/24/2025 Reviewed on 04/24/2025

Trade name: AMP

(Contd. of page 5)

60.0.31

CAS: 7447-40-7 Potassium Chloride Oral LD50 2,600 mg/kg (rat)

· Primary irritant effect:

· on the skin: No irritant effect.

· on the eye: No irritating effect.

· Sensitization: No sensitizing effects known.

· Additional toxicological information:

The product is not subject to classification according to internally approved calculation methods for preparations:

When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.

· Carcinogenic categories

· IARC (International Agency for Research on Cancer)

Proprietary Corrosion Inhibitor 3

· NTP (National Toxicology Program) None of the ingredients are listed.

· OSHA-Ca (Occupational Safety & Health Administration) None of the ingredients are listed.

12 Ecological information

· Toxicity

· Aquatic toxicity:

CAS: 7786-30-3 Magnesium Chloride LC50 (static) 548.4 mg/l /48 h (daphnia magna (water flea))

2,119.3 mg/l /96 h (pimephales promelas (fathead minnow)) EC50 - Growth Rate >100 mg/l /72 h (desmodesmus subspicatus (green algae)) (OECD Test

Guideline 201) EC50 >900 mg/l /3 h (activated sludge) (OECD Test Guideline 209)

· Persistence and degradability No further relevant information available.

· Behavior in environmental systems:

· Bioaccumulative potential No further relevant information available.

· Mobility in soil No further relevant information available.

· Results of PBT and vPvB assessment

· PBT: Not applicable.

· vPvB: Not applicable.

· Other adverse effects No further relevant information available.

13 Disposal considerations

· Waste treatment methods

· Recommendation:

Observe all federal, state, and local environmental regulations when disposing of this material.

(Contd. on page 7)

Page 7/8

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/24/2025 Reviewed on 04/24/2025

Trade name: AMP

(Contd. of page 6)

60.0.31

· Uncleaned packagings:

· Recommendation: Disposal must be made according to official regulations.

· Recommended cleansing agent: Water, if necessary with cleansing agents.

14 Transport information

· UN-Number

· DOT, ADR, IMDG, IATA Non-Regulated Material

· UN proper shipping name

· DOT, ADR, IMDG, IATA Non-Regulated Material

· Transport hazard class(es)

· DOT, ADR, ADN, IMDG, IATA

· Class Non-Regulated Material

· Packing group

· DOT, ADR, IMDG, IATA Non-Regulated Material

· Environmental hazards: Not applicable.

· Special precautions for user Not applicable.

· Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not applicable.

· UN "Model Regulation": Non-Regulated Material

15 Regulatory information

· Safety, health and environmental regulations/legislation specific for the substance or mixture No further relevant information available.

· Sara

· Section 355 (extremely hazardous substances):

None of the ingredients are listed.

· Section 313 (Specific toxic chemical listings):

None of the ingredients is listed.

· TSCA (Toxic Substances Control Act):

All components have the value ACTIVE.

· Hazardous Air Pollutants None of the ingredients are listed.

· Proposition 65

· Chemicals known to cause cancer:

None of the ingredients is listed.

· Chemicals known to cause reproductive toxicity for females:

None of the ingredients are listed.

(Contd. on page 8)

Page 8/8

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/24/2025 Reviewed on 04/24/2025

Trade name: AMP

(Contd. of page 7)

60.0.31

· Chemicals known to cause reproductive toxicity for males:

None of the ingredients are listed.

· Chemicals known to cause developmental toxicity:

None of the ingredients are listed.

· Carcinogenic categories

· EPA (Environmental Protection Agency)

None of the ingredients are listed.

· TLV (Threshold Limit Value) None of the ingredients are listed.

· NIOSH-Ca (National Institute for Occupational Safety and Health) None of the ingredients are listed.

· GHS label elements Non-Regulated Material

· Hazard pictograms Non-Regulated Material

· Signal word Non-Regulated Material

· Hazard statements Non-Regulated Material

· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

16 Other information The data in this Safety Data Sheet relates only to the specific material designated herein and does not relate to use in combination with any other material in any process. The information set forth herein is furnished free of charge and is based on technical data that Envirotech Services, LLC beleives to be reliable. It is intended for use by persons having technical skill and at their own discretion and risk.

Since conditions of use are outside of Envirotech Services, LLC's control, Envirotech Services, LLC makes no warranties, expressed or implied, and assumes no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate under, or a recommendation to infringe upon, any patents.

· Department issuing SDS: Lab

· Contact: -

· Date of preparation / last revision 04/24/2025 / -

· Abbreviations and acronyms:

ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods DOT: US Department of Transportation IATA: International Air Transport Association EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) NFPA: National Fire Protection Association (USA) HMIS: Hazardous Materials Identification System (USA) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative NIOSH: National Institute for Occupational Safety OSHA: Occupational Safety & Health TLV: Threshold Limit Value PEL: Permissible Exposure Limit REL: Recommended Exposure Limit

· * Data compared to the previous version altered.

910 54th Avenue, Suite 230 Greeley, CO 80634

Call Us Phone: 1.800.369.3878 Fax: 1.970.346.3959

Visit Us www.EnviroTechServices.com

For more than 30 years, EnviroTech Services, Inc. has proven to be an industry leader in soil stabilization and road solutions.

We effectively produce high performing products that provide our customers with improved effi ciency and reduced cost. We achieve these goals while, at the same time, reducing environmental impact and enhancing sustainability.

People Helping People Improve Their Environment

DON’T BE LEFT IN THE COLD

Discover AMP - a liquid inhibitor and salt brine enhancer and breakthrough in de-icing technology.

Enhance and Protect: Outshine the Competition

Superior Road Defense

AMP®

ADVANCED DE-ICING TECHNOLOGY

ACCELERATE � MAINTAIN � PROTECT

Amplify the performance of your anti-icing and deicing program by adding AMP to your salt brine! With AMP, roads can be treated both before and during a storm to more effectively reduce snow and ice buildup preserving road safety. AMP is a salt brine enhancer that accelerates ice melt, maintains friction and protects your roads.

With 50% more melting capacity, AMP in salt brine signifi cantly outshines the competition. And adding AMP at 20% also lowers your salt brine’s working temperature (1:1 freeze point) from 18°F to 10°F, protecting your roads in the coldest temperatures. AMP-treated roads become free of ice and snow more quickly than roads treated with salt brine alone. With the low freeze point of Salt Brine with AMP, your storage tanks are also protected in colder conditions.

When used to pretreat roads alone, salt brine dries out and does not stick to the road’s surface - wind and traffi c can easily sweep it away. However, with AMP added, it bonds to roads in even the most severe weather conditions.

©2018 EnviroTech Services, Inc. Product is a registered trademark of EnviroTech Services, Inc.

No warranty expressed or implied, including but not limited to warranty of merchantability or fitness for a particular purpose, is made concerning this product.

910 54th Avenue, Suite 230 Greeley, CO 80634

Call Us Phone: 1.800.369.3878 Fax: 1.970.346.3959

Email Us Info@EnviroTechServices.com

Science behind AMP The unique, liquid composition of AMP disrupts the bonding of hard ice crystals and softens ice. This provides a tighter connection between the road and tires, making driving safer. The faster melting performance allows for more time between treatments, or a reduced application rate, making AMP the more cost-effective solution. AMP reduces anti-icing and deicing cost per mile of roadways significantly, driving a strong positive return on investment for your purchase.

Advanced De-icing Technology

AMP®

Corrosion Protection

Looser Snow, Easier Plowing

Ice Hardness Test

Features & Benefits

AMP exceeds the PNS specifications for corrosion protection and provides a safer driving surface than the standard 23% salt brine. Based on laboratory data and results obtained in the field, at temperatures above 15F a 10% addition rate of AMP to salt brine has been found to be effective. At temperatures below 15F, an add rate of at least 15% AMP is strongly recommended. These recommendations should be considered an initial guideline only. Many variables can impact the field performance of any de-icing product and therefore the experience and judgment of the end user should be considered.

When AMP is added to salt brine, it is much more effective at breaking through layers of ice and snow than salt brine alone and significantly more effective than the competitor’s formula.

A test was performed using a penetrometer, a stainless steel cone that measures the hardness of a material. The penetrometer was dropped into the frozen material, measuring in (mm) the penetration into the snow. The deeper penetration, the softer the snow and ice.

AMPSalt Brine Competitor Water m m

Ic e

P en et ra ti on

AMP

5.5

4.5

3.5

2.5

1.5

0.5

S al t

B ri n e

W at er

A M

P -P ro te ct m ix w it h S al t

B ri n e in S al t

B ri n e

A M

P -P ro te ct in

S al t B ri n e

Ice Hardness

Product at 40% Concentration / Temperature at 0ºF

• Product sticks to road

• 75% more effective than salt brine alone

• No odor or tank cleanup

• Does not dry up and blow away after pre-treatment

• Maintain service levels with fewer treatments

•Reduce costs of cleanup

ANTI-ICING

• More cost effective than other chlorides

• Corrosion inhibited

• Improves melting capacity

• Reduce costs by 10% to 30% compared to other chlorides

• Reduce corrosion costs for your equipment

• Reduce bounce and scatter and improve service levels

TREATING SALT AT

THE SPINNER

• Effective at colder temperatures

• Reduce application rates or frequency

• Protects your tanks from corrosion and colder temps

• Maintain service levels in the coldest storms

• Reduce costs due to fewer applications required

• Reduce capital costs due to less corrosion

DEICING

Product Name MeltDown APEX-C Product ID ETS-3103

Product Application Anti-icing, deicing, pre-wetting. Clear Roads QPL Category 2 approved product.

CHEMICAL PROPERTIES

Chemical Constituent Typical Analysis (%) Range (%)

Calcium Chloride 29.4 29.0-31.0

Magnesium Chloride 1.9 ≤ 2.0

Sodium Chloride 0.4 ≤ 0.5

Potassium Chloride 0.8 ≤ 1.0

Proprietary Organic Acid Proprietary Proprietary

Proprietary Corrosion Inhibitor Proprietary Proprietary

Proprietary Organic Corrosion Inhibitor Proprietary Proprietary

Typical Analysis

GENERAL SPECIFICATIONS

Constituent Detected Level (ppm) Constituent Detected Level (ppm) Arsenic ≤ 5.00 Barium ≤ 100.00 Cadmium ≤ 0.20 Chromium ≤ 1.00 Copper ≤ 1.00 Lead ≤ 1.00 Mercury ≤ 0.05 Selenium ≤ 5.00

Form, Color, Odor Liquid, Colorless, Mild Specific Gravity (g/mls @ 20 °C) 1.308-1.3328

Density (lbs/gal @ 20 °C) 10.915-11.082

Corrosion Rate (NACE Standard TM0169-95, PNS Modified) ≤ 30.0

Page 1/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

60.0.31

1 Identification

· Product identifier

· Trade name: MeltDown APEX-C

· Product Code: ETS-3103

· Application of the substance / the mixture

Anti-icing, deicing, pre-wetting. Clear Roads QPL Category 2 approved product.

· Details of the supplier of the safety data sheet

· Manufacturer/Supplier:

Envirotech Services, LLC 910 54th Avenue Suite 230 Greeley, CO 80634

(970) 346-3900

· Information department: Product safety department

· Emergency telephone number: CHEMTREC: (800) 424-9300

2 Hazard(s) identification

· Classification of the substance or mixture

Eye Irritation 2A H319 Causes serious eye irritation.

· Label elements

· GHS label elements

The product is classified and labeled according to the Globally Harmonized System (GHS).

· Hazard pictograms

· Signal word Warning

· Hazard statements

H319 Causes serious eye irritation.

· Precautionary statements

P264 Wash thoroughly after handling.

P280 Wear eye protection / face protection.

P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P337+P313 If eye irritation persists: Get medical advice/attention.

· Classification system:

· NFPA ratings (scale 0 - 4)

Health = 1 Fire = 0 Reactivity = 0

Page 2/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: MeltDown APEX-C

(Contd. of page 1)

60.0.31

· HMIS-ratings (scale 0 - 4)

HEALTH

FIRE

REACTIVITY

Health = 1 Fire = 0 Reactivity = 0

· Other hazards

· Results of PBT and vPvB assessment

· PBT: Not applicable.

· vPvB: Not applicable.

3 Composition/information on ingredients

· Chemical characterization: Mixtures

· Description: Mixture of the substances listed below with nonhazardous additions.

· Components:

CAS: 10043-52-4 Calcium Chloride 29.0-31.0%

· Non-hazardous components CAS: 7732-18-5 Water Proprietary% CAS: 7786-30-3 Magnesium Chloride <2.0% CAS: 7447-40-7 Potassium Chloride <1.0% CAS: 7647-14-5 Sodium Chloride <0.5%

Proprietary Organic Acid Proprietary% Proprietary Corrosion Inhibitor Proprietary% Proprietary Organic Corrosion Inhibitor Proprietary%

· Additional information:

The exact percentages of the ingredients of this mixture are considered to be proprietary and are withheld in accordance with the provisions of paragraph (i) of §1910.1200 of 29 CFR 1910.1200 Trade Secrets.

4 First-aid measures

· Description of first aid measures

· After inhalation:

Generally this product does not irritate with inhalation.

If respiratory irritation occurs, consult a doctor.

· After skin contact:

Generally the product does not irritate the skin.

Wash with soap and water.

If skin irritation occurs, consult a doctor.

· After eye contact:

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

· After swallowing:

Rinse mouth out and then drink plenty of water.

Do not induce vomiting without medical advice.

If vomiting does occur, repeat fluid administration.

If irritation or discomfort occurs, consult a doctor.

Page 3/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: MeltDown APEX-C

(Contd. of page 2)

60.0.31

· Information for doctor:

· Most important symptoms and effects, both acute and delayed

No further relevant information available.

· Indication of any immediate medical attention and special treatment needed

No further relevant information available.

5 Fire-fighting measures

· Extinguishing media

· Suitable extinguishing agents:

Product is not flammable.

Use fire fighting measures that suit the environment.

· Special hazards arising from the substance or mixture No further relevant information available.

· Advice for firefighters

· Protective equipment:

As in any fire, wear self-contained breathing apparatus pressure demand (NIOSH approved or equivalent) and full protective gear to prevent contact with skin and eyes.

6 Accidental release measures

· Personal precautions, protective equipment and emergency procedures Avoid contact with eyes, skin, and clothing.

· Environmental precautions: Dilute with plenty of water.

· Methods and material for containment and cleaning up:

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

· Reference to other sections

See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment.

See Section 13 for disposal information.

· Protective Action Criteria for Chemicals

· PAC-1:

CAS: 10043-52-4 Calcium Chloride 12 mg/m³ CAS: 7786-30-3 Magnesium Chloride 34 mg/m³

Proprietary Corrosion Inhibitor 13 mg/m³

· PAC-2:

CAS: 10043-52-4 Calcium Chloride 33 mg/m3 CAS: 7786-30-3 Magnesium Chloride 370 mg/m³

Proprietary Corrosion Inhibitor 140 mg/m³

· PAC-3:

CAS: 10043-52-4 Calcium Chloride 200 mg/m3 CAS: 7786-30-3 Magnesium Chloride 1,600 mg/m³

Proprietary Corrosion Inhibitor 840 mg/m³

Page 4/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: MeltDown APEX-C

(Contd. of page 3)

60.0.31

7 Handling and storage

· Handling:

· Precautions for safe handling No special measures required.

· Information about protection against explosions and fires: No special measures required.

· Conditions for safe storage, including any incompatibilities

· Storage:

· Requirements to be met by storerooms and receptacles: No special requirements.

· Information about storage in one common storage facility: Not required.

· Further information about storage conditions: Keep receptacle tightly sealed.

· Specific end use(s) No further relevant information available.

8 Exposure controls/personal protection

· Additional information about design of technical systems: No further data; see section 7.

· Control parameters

· Components with limit values that require monitoring at the workplace:

The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.

· Additional information: The lists that were valid during the creation were used as basis.

· Exposure controls

· Personal protective equipment:

· General protective and hygienic measures:

Avoid contact with eyes, skin, and clothing.

The usual precautionary measures for handling chemicals should be followed.

Wash hands before breaks and at the end of work.

· Breathing equipment: Not required.

· Protection of hands:

Protective gloves

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

· Material of gloves

The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

· Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

· Eye protection:

Safety glasses

Page 5/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: MeltDown APEX-C

(Contd. of page 4)

60.0.31

· Body protection:

Protective work clothing

* 9 Physical and chemical properties

· Information on basic physical and chemical properties

· General Information

· Appearance:

Form: Liquid Color: Colorless

· Odor: Mild

· Odor threshold: Not determined.

· pH-value at 20 °C (68 °F): 6.0-10.0

· Change in condition Melting point/Melting range: Undetermined.

Boiling point/Boiling range: >100 °C (>212 °F)

· Flash point: Not applicable.

· Flammability: Not applicable.

· Decomposition temperature: Not determined.

· Ignition temperature: Product is not selfigniting.

· Danger of explosion: Product does not present an explosion hazard.

· Explosion limits:

Lower: Not determined.

Upper: Not determined.

· Vapor pressure at 20 °C (68 °F): <23.4 hPa (<17.6 mm Hg)

· Density at 20 °C (68 °F): 1.308-1.328 g/cm³ (10.91526-11.08216 lbs/gal)

· Relative density Not determined.

· Vapor density Not determined.

· Evaporation rate Not determined.

· Solubility in / Miscibility with Water: Fully miscible.

· Partition coefficient (n-octanol/water): Not determined.

· Viscosity:

Dynamic: Not determined.

Kinematic: Not determined.

· Other information No further relevant information available.

Page 6/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: MeltDown APEX-C

(Contd. of page 5)

60.0.31

10 Stability and reactivity

· Reactivity No further relevant information available.

· Chemical stability

· Thermal decomposition / conditions to be avoided:

No decomposition if used according to specifications.

· Possibility of hazardous reactions No dangerous reactions known.

· Conditions to avoid No further relevant information available.

· Incompatible materials: No further relevant information available.

· Hazardous decomposition products: No dangerous decomposition products known.

11 Toxicological information

· Information on toxicological effects

· Acute toxicity:

· LD/LC50 values that are relevant for classification:

CAS: 10043-52-4 Calcium Chloride Oral LD50 1,000 mg/kg (rat)

CAS: 7786-30-3 Magnesium Chloride Oral LD50 >5,000 mg/kg (rat) (OECD Test Guideline 423) Dermal LD50 >2,000 mg/kg (rat) (OECD Test Guideline 402)

CAS: 7447-40-7 Potassium Chloride Oral LD50 2,600 mg/kg (rat)

CAS: 7647-14-5 Sodium Chloride Oral LD50 3,000 mg/kg (rat)

Proprietary Corrosion Inhibitor Oral LD50 4,220 mg/kg (rat)

· Primary irritant effect:

· on the skin: No irritant effect.

· on the eye: Irritating effect.

· Sensitization: No sensitizing effects known.

· Additional toxicological information:

The product shows the following dangers according to internally approved calculation methods for preparations:

Irritant

· Carcinogenic categories

· IARC (International Agency for Research on Cancer)

None of the ingredients are listed.

· NTP (National Toxicology Program) None of the ingredients are listed.

· OSHA-Ca (Occupational Safety & Health Administration) None of the ingredients are listed.

Page 7/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: MeltDown APEX-C

(Contd. of page 6)

60.0.31

12 Ecological information

· Toxicity

· Aquatic toxicity:

CAS: 7786-30-3 Magnesium Chloride LC50 (static) 548.4 mg/l /48 h (daphnia magna (water flea))

2,119.3 mg/l /96 h (pimephales promelas (fathead minnow)) EC50 - Growth Rate >100 mg/l /72 h (desmodesmus subspicatus (green algae)) (OECD Test

Guideline 201) EC50 >900 mg/l /3 h (activated sludge) (OECD Test Gideline 209)

· Persistence and degradability No further relevant information available.

· Behavior in environmental systems:

· Bioaccumulative potential No further relevant information available.

· Mobility in soil No further relevant information available.

· Results of PBT and vPvB assessment

· PBT: Not applicable.

· vPvB: Not applicable.

· Other adverse effects No further relevant information available.

13 Disposal considerations

· Waste treatment methods

· Recommendation:

Observe all federal, state, and local environmental regulations when disposing of this material.

· Uncleaned packagings:

· Recommendation: Disposal must be made according to official regulations.

· Recommended cleansing agent: Water, if necessary with cleansing agents.

14 Transport information

· UN-Number

· DOT, ADR, IMDG, IATA Non-Regulated Material

· UN proper shipping name

· DOT, ADR, IMDG, IATA Non-Regulated Material

· Transport hazard class(es)

· DOT, ADR, ADN, IMDG, IATA

· Class Non-Regulated Material

· Packing group

· DOT, ADR, IMDG, IATA Non-Regulated Material

· Environmental hazards: Not applicable.

· Special precautions for user Not applicable.

Page 8/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: MeltDown APEX-C

(Contd. of page 7)

60.0.31

· Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not applicable.

· UN "Model Regulation": Non-Regulated Material

15 Regulatory information

· Safety, health and environmental regulations/legislation specific for the substance or mixture No further relevant information available.

· Sara

· Section 355 (extremely hazardous substances):

None of the ingredients are listed.

· Section 313 (Specific toxic chemical listings):

None of the ingredients is listed.

· TSCA (Toxic Substances Control Act):

All components have the value ACTIVE.

· Hazardous Air Pollutants None of the ingredients are listed.

· Proposition 65

· Chemicals known to cause cancer:

None of the ingredients is listed.

· Chemicals known to cause reproductive toxicity for females:

None of the ingredients are listed.

· Chemicals known to cause reproductive toxicity for males:

None of the ingredients are listed.

· Chemicals known to cause developmental toxicity:

None of the ingredients are listed.

· Carcinogenic categories

· EPA (Environmental Protection Agency)

None of the ingredients are listed.

· TLV (Threshold Limit Value) None of the ingredients are listed.

· NIOSH-Ca (National Institute for Occupational Safety and Health) None of the ingredients are listed.

· GHS label elements

(Contd. on page 9)

Page 9/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: MeltDown APEX-C

(Contd. of page 8)

60.0.31

· Hazard statements H319 Causes serious eye irritation.

· Precautionary statements P264 Wash thoroughly after handling.

P280 Wear eye protection / face protection.

P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P337+P313 If eye irritation persists: Get medical advice/attention.

· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

16 Other information The data in this Safety Data Sheet relates only to the specific material designated herein and does not relate to use in combination with any other material in any process. The information set forth herein is furnished free of charge and is based on technical data that Envirotech Services, LLC beleives to be reliable. It is intended for use by persons having technical skill and at their own discretion and risk.

Since conditions of use are outside of Envirotech Services, LLC's control, Envirotech Services, LLC makes no warranties, expressed or implied, and assumes no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate under, or a recommendation to infringe upon, any patents.

· Department issuing SDS: Lab

· Contact: -

· Date of preparation / last revision 04/07/2025 / -

· Abbreviations and acronyms:

ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods DOT: US Department of Transportation IATA: International Air Transport Association EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) NFPA: National Fire Protection Association (USA) HMIS: Hazardous Materials Identification System (USA) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative NIOSH: National Institute for Occupational Safety OSHA: Occupational Safety & Health TLV: Threshold Limit Value PEL: Permissible Exposure Limit REL: Recommended Exposure Limit Eye Irritation 2A: Serious eye damage/eye irritation – Category 2A

Call Us Phone: 1.800.369.3878 Fax: 1.970.346.3959

Visit Us www.EnviroTechServices.com

For more than 30 years, EnviroTech Services, Inc. has proven to be an industry leader in soil stabilization and road solutions.

We effectively produce high performing products that provide our customers with improved effi ciency and reduced cost.

We achieve these goals while, at the same time, reducing environmental impact and enhancing sustainability.

People Helping People Improve Their Environment

MeltDown Apex™-C is the newest Calcium

Chloride formula added to the MeltDown line of products. It was created with a combination of proprietary additives and organic polymers that provide corrosion protection and enhanced performance even at the lowest winter temperatures.

When combined with a 1:1 ratio of water from melting snow and ice, it will not refreeze until approximately 0°F, while 32% Calcium Chloride freezes at 8°F.

This unique formula breaks the bond of ice and snow at the surface and works to decrease snow pack build up.

It’s the secret to anti-icing, deicing and corrosion control.

ICY AND SNOWY ROADS HAVE MET THEIR MATCH

LIQUID DEICING & ANTI-ICING

Performance & Design

MeltDown Apex®-C

A CALCIUM CHLORIDE PRODUCT

No warranty expressed or implied, including but not limited to warranty of merchantability or fitness for a particular purpose, is made concerning this product.

910 54th Avenue, Suite 230 Greeley, CO 80634

Call Us Phone: 1.800.369.3878 Fax: 1.970.346.3959

Email Us Info@EnviroTechServices.com

Not only does MeltDown Apex-C meet the PNS specifications for corrosion, but it provides corrosion protection that is 70% better than standard 32% Calcium Chloride products. All of these benefits mean your long-term cost of road sustainability is drastically reduced.

Compared to traditional 32% Calcium Chloride and Rock Salt, MeltDown Apex-C is 70% less corrosive. MeltDown Apex-C meets all of PNS’s (Pacific Northwest Snowfighters) specifications and has a corrosion score of less than 30 to be approved to the PNS Qualified Products List.

Corrosion Control and Safer Roads- Aiding in corrosion control, MeltDown Apex-C™ can be applied directly to paved surfaces to prevent snow and ice bonding – resulting in safer roads. It also lowers the refreezing point, creating less ice for faster snow removal, while increasing traction.

Apex-C - Clear, no odor, and does not stain exterior surfaces.

Amber Clear Appearance

APEX-C Competition

FEATURES BENEFITS

Breaks bonds of ice and snow at the surface Provides a longer cycle time between snowplow routes

Appears clear to amber with little to no odor Lowers costs of repairs and damage to vehicles and infrastructure

Can be applied directly to road surface Does not stain and is environmentally sensitive

Does not separate or require agitation in storage Performs consistently and reliably

MELTDOWN-APEX®-C

Product Name SOS-C Product ID ETS-2082

Product Application Salt and stockpile treatment.

CHEMICAL PROPERTIES

Chemical Constituent Typical Analysis (%) Range (%)

Calcium Chloride Proprietary Proprietary

Sodium Chloride Proprietary Proprietary

Potassium Chloride Proprietary Proprietary

Proprietary Organic Corrosion Inhibitor Proprietary Proprietary

Typical Analysis

GENERAL SPECIFICATIONS

Constituent Detected Level (ppm) Constituent Detected Level (ppm) Arsenic ≤ 5.00 Barium ≤ 100.00 Cadmium ≤ 0.20 Chromium ≤ 1.00 Copper ≤ 1.00 Lead ≤ 1.00 Mercury ≤ 0.05 Selenium ≤ 5.00

Form, Color, Odor Liquid, Colorless, Mild Specific Gravity (g/mls @ 20 °C) 1.288-1.308

Density (lbs/gal @ 20 °C) 10.748-10.915

Page 1/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

60.0.31

1 Identification

· Product identifier

· Trade name: SOS-C

· Product Code: ETS-2082

· Application of the substance / the mixture Salt and stockpile treatment.

· Details of the supplier of the safety data sheet

· Manufacturer/Supplier:

Envirotech Services, LLC 910 54th Avenue Suite 230 Greeley, CO 80634

(970) 346-3900

· Information department: Product safety department

· Emergency telephone number: CHEMTREC: (800) 424-9300

2 Hazard(s) identification

· Classification of the substance or mixture

Eye Irritation 2A H319 Causes serious eye irritation.

· Label elements

· GHS label elements

H319 Causes serious eye irritation.

· Precautionary statements

P264 Wash thoroughly after handling.

P280 Wear eye protection / face protection.

P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P337+P313 If eye irritation persists: Get medical advice/attention.

· Classification system:

· NFPA ratings (scale 0 - 4)

Health = 1 Fire = 0 Reactivity = 0

Page 2/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: SOS-C

(Contd. of page 1)

60.0.31

· HMIS-ratings (scale 0 - 4)

HEALTH

FIRE

REACTIVITY

Health = 1 Fire = 0 Reactivity = 0

· Other hazards

· Results of PBT and vPvB assessment

· PBT: Not applicable.

· vPvB: Not applicable.

3 Composition/information on ingredients

· Chemical characterization: Mixtures

· Description: Mixture of the substances listed below with nonhazardous additions.

· Components:

CAS: 10043-52-4 Calcium Chloride Proprietary%

· Non-hazardous components CAS: 7732-18-5 Water Proprietary% CAS: 7447-40-7 Potassium Chloride Proprietary% CAS: 7647-14-5 Sodium Chloride Proprietary%

Proprietary Organic Corrosion Inhibitor Proprietary%

· Additional information:

The exact percentages of the ingredients of this mixture are considered to be proprietary and are withheld in accordance with the provisions of paragraph (i) of §1910.1200 of 29 CFR 1910.1200 Trade Secrets.

4 First-aid measures

· Description of first aid measures

· After inhalation:

Generally this product does not irritate with inhalation.

If respiratory irritation occurs, consult a doctor.

· After skin contact:

Generally the product does not irritate the skin.

Wash with soap and water.

If skin irritation occurs, consult a doctor.

· After eye contact:

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

· After swallowing:

Rinse mouth out and then drink plenty of water.

Do not induce vomiting without medical advice.

If vomiting does occur, repeat fluid administration.

If irritation or discomfort occurs, consult a doctor.

· Information for doctor:

· Most important symptoms and effects, both acute and delayed

No further relevant information available.

Page 3/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: SOS-C

(Contd. of page 2)

60.0.31

· Indication of any immediate medical attention and special treatment needed No further relevant information available.

5 Fire-fighting measures

· Extinguishing media

· Suitable extinguishing agents:

Product is not flammable.

Use fire fighting measures that suit the environment.

· Special hazards arising from the substance or mixture No further relevant information available.

· Advice for firefighters

· Protective equipment:

As in any fire, wear self-contained breathing apparatus pressure demand (NIOSH approved or equivalent) and full protective gear to prevent contact with skin and eyes.

6 Accidental release measures

· Personal precautions, protective equipment and emergency procedures Avoid contact with eyes, skin, and clothing.

· Environmental precautions: Dilute with plenty of water.

· Methods and material for containment and cleaning up:

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

· Reference to other sections

See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment.

See Section 13 for disposal information.

· Protective Action Criteria for Chemicals

· PAC-1:

CAS: 10043-52-4 Calcium Chloride 12 mg/m³

· PAC-2:

CAS: 10043-52-4 Calcium Chloride 33 mg/m3

· PAC-3:

CAS: 10043-52-4 Calcium Chloride 200 mg/m3

7 Handling and storage

· Handling:

· Precautions for safe handling No special measures required.

· Information about protection against explosions and fires: No special measures required.

· Conditions for safe storage, including any incompatibilities

· Storage:

· Requirements to be met by storerooms and receptacles: No special requirements.

· Information about storage in one common storage facility: Not required.

· Further information about storage conditions: Keep receptacle tightly sealed.

Page 4/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: SOS-C

(Contd. of page 3)

60.0.31

· Specific end use(s) No further relevant information available.

8 Exposure controls/personal protection

· Additional information about design of technical systems: No further data; see section 7.

· Control parameters

· Components with limit values that require monitoring at the workplace:

The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.

· Additional information: The lists that were valid during the creation were used as basis.

· Exposure controls

· Personal protective equipment:

· General protective and hygienic measures:

Avoid contact with eyes, skin, and clothing.

The usual precautionary measures for handling chemicals should be followed.

Wash hands before breaks and at the end of work.

· Breathing equipment: Not required.

· Protection of hands:

Protective gloves

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

· Material of gloves

The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

· Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

· Eye protection:

Safety glasses

· Body protection:

Protective work clothing

Page 5/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: SOS-C

(Contd. of page 4)

60.0.31

* 9 Physical and chemical properties

· Information on basic physical and chemical properties

· General Information

· Appearance:

Form: Liquid Color: Colorless

· Odor: Mild

· Odor threshold: Not determined.

· pH-value at 20 °C (68 °F): 6.0-10.0

· Change in condition Melting point/Melting range: Undetermined.

Boiling point/Boiling range: >100 °C (>212 °F)

· Flash point: Not applicable.

· Flammability: Not applicable.

· Decomposition temperature: Not determined.

· Ignition temperature: Product is not selfigniting.

· Danger of explosion: Product does not present an explosion hazard.

· Explosion limits:

Lower: Not determined.

Upper: Not determined.

· Vapor pressure at 20 °C (68 °F): <23.4 hPa (<17.6 mm Hg)

· Density at 20 °C (68 °F): 1.288-1.308 g/cm³ (10.74836-10.91526 lbs/gal)

· Relative density Not determined.

· Vapor density Not determined.

· Evaporation rate Not determined.

· Solubility in / Miscibility with Water: Fully miscible.

· Partition coefficient (n-octanol/water): Not determined.

· Viscosity:

Dynamic: Not determined.

Kinematic: Not determined.

· Other information No further relevant information available.

10 Stability and reactivity

· Reactivity No further relevant information available.

· Chemical stability

· Thermal decomposition / conditions to be avoided:

No decomposition if used according to specifications.

· Possibility of hazardous reactions No dangerous reactions known.

· Conditions to avoid No further relevant information available.

Page 6/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: SOS-C

(Contd. of page 5)

60.0.31

· Incompatible materials: No further relevant information available.

· Hazardous decomposition products: No dangerous decomposition products known.

11 Toxicological information

· Information on toxicological effects

· Acute toxicity:

· LD/LC50 values that are relevant for classification:

CAS: 10043-52-4 Calcium Chloride Oral LD50 1,000 mg/kg (rat)

CAS: 7447-40-7 Potassium Chloride Oral LD50 2,600 mg/kg (rat)

CAS: 7647-14-5 Sodium Chloride Oral LD50 3,000 mg/kg (rat)

· Primary irritant effect:

· on the skin: No irritant effect.

· on the eye: Irritating effect.

· Sensitization: No sensitizing effects known.

· Additional toxicological information:

The product shows the following dangers according to internally approved calculation methods for preparations:

Irritant

· Carcinogenic categories

· IARC (International Agency for Research on Cancer)

None of the ingredients are listed.

· NTP (National Toxicology Program) None of the ingredients are listed.

· OSHA-Ca (Occupational Safety & Health Administration) None of the ingredients are listed.

12 Ecological information

· Toxicity

· Aquatic toxicity: No further relevant information available.

· Persistence and degradability No further relevant information available.

· Behavior in environmental systems:

· Bioaccumulative potential No further relevant information available.

· Mobility in soil No further relevant information available.

· Results of PBT and vPvB assessment

· PBT: Not applicable.

· vPvB: Not applicable.

· Other adverse effects No further relevant information available.

Page 7/9

OSHA HazCom Standard 29 CFR 1910.1200(g)

Printing date 04/07/2025 Reviewed on 04/07/2025

Trade name: SOS-C

(Contd. of page 6)

60.0.31

13 Disposal considerations

· Waste treatment methods

· Recommendation:

Observe all federal, state, and local environmental regulations when disposing of this material.

· Uncleaned packagings:

· Recommendation: Disposal must be…