BIDDER GUIDE

The following information is provided by the City of Columbus to assist you in navigating the formal bid procedures. This information is not to supersede or replace any of the actual bid specifications or requirements; its sole purpose is to provide information on the process. If you have any questions regarding the process, please contact the appropriate City of Columbus representative listed on the bid solicitation (for specification questions see instructions below).

Any addenda issued by the City of Columbus will be posted on this site. The City of Columbus will send notification of addenda to Bidders that have an active login id and password with Columbus Vendor Services and are registered for the commodity code(s) associated with this solicitation.

Though the notification methods above will be utilized to notify bidders of addenda it is ultimately the Bidder’s responsibility to check this site for verification of any issued addenda.

IN ORDER FOR YOUR BID TO BE CONSIDERED: (CHECK ONE BELOW)

X Pricing is to be entered into the corresponding lines in the body of the RFQ

The following documents must be completed and attached to your response. Complete this checklist to confirm the items required in your bid. Failure to submit the listed documents may be cause for rejection of your bid:

Reference Pages

Subcontractor Information

Experience Documentation

Literature

Warranty

______ Dealers Build Sheet

Please refer to the Vendor Services User Guide for guidance using the Attachment feature to attach references, literature, warranty information and any other documentation as needed.

PLEASE NOTE – ALL ATTACHMENTS MUST BE IN PDF FORMAT TO ATTACH.

Revised 2026

EQUAL OPPORTUNITY CLAUSE

The Contractor will not unlawfully discriminate against any employee or applicant for employment because of race, sex, sexual orientation, gender identity or expression, color, religion, ancestry, national origin, age, disability, familial status or military status. The Contractor will take affirmative action to ensure that applicants are employed, and that employees are treated during employment without regard to their race, sex, sexual orientation, gender identity or expression, color, religion, ancestry, national origin, age, disability, familial status or military status. Such action shall include, but not be limited to, the following: employment up-grading, demotion, or termination; rates of pay or other forms of compensation; and selection for training. The Contractor agrees to post in conspicuous places, available to employees and applicants for employment, notices summarizing the provisions of this Equal Opportunity Clause.

The Contractor will, in all solicitations or advertisements for employees placed by or on behalf of the Contractor, state that the Contractor is an equal opportunity employer.

It is the policy of the City of Columbus that program members as defined in section 3901.01 of the Columbus City Codes shall have the maximum practicable opportunity to participate in the performance of contracts awarded by the City.

The Contractor shall permit access to any relevant and pertinent reports and documents by the Office of Diversity and Inclusion Director for the sole purpose of verifying compliance with

Title 39 of the Columbus City Codes, and with the Office of Diversity and Inclusion regulations.

All such materials provided to the Office of Diversity and Inclusion Director by the Contractor shall be considered confidential.

The Contractor will not obstruct or hinder the Office of Diversity and Inclusion Director or his/her deputies, staff and assistants in the fulfillment of the duties and responsibilities imposed by Title 39 of the Columbus City Codes.

The Contractor and each subcontractor will include a summary of this Equal Opportunity

Clause in every subcontract. The Contractor will take such action with respect to any subcontractor as is necessary as a means of enforcing the provisions of the Equal Opportunity Clause.

The Contractor agrees to refrain from subcontracting any part of this Contract or contract modification thereto to a contractor not holding a valid certification number as provided for in

Title 39 of the Columbus City Codes.

Failure or refusal of a Contractor or subcontractor to comply with the provisions of Title

39 of the Columbus City Codes may result in cancellation of this contract.

INFORMATION FOR BIDDERS

-3A- (INFORMATION FOR BIDDERS continued)

SPECIAL CONDITIONS

Special conditions included in the specifications, if inconsistent with provisions included in "Information for Bidders", shall take precedence over any provisions in "Information for Bidders" to the extent inconsistent.

SUBMISSION OF PROPOSAL

Responses must be entered and submitted electronically in the body of the RFQ. Some RFQs require pricing lists or additional documents to be attached to the RFQ response electronically. In rare instances documents require submission via regular mail delivery. Refer to the "Proposal Information" section of the specifications for instructions for submission. Any unauthorized conditions, limitations or provisions attached to the proposal may render the bid nonresponsive and result in its rejection.

ACCEPTANCE AND REJECTION

This proposal submitted by the bidder to the City of Columbus will be accepted or rejected within a period of 180 days from bid opening date.

The City reserves the right to waive technicalities, and to request a rebid on the required material. If more than one item, prices shall be quoted on the units requested. However, each item shall be considered a separate bid and the City reserves the right to award a contract on each item separately or on all items as a whole or any combination thereof. Bidders whose proposal is made on an "All or None" basis must clearly state such fact in the proposals.

Each RFQ issued by the City shall state that the RFQ may be cancelled and that any RFQ response may be rejected in whole or in part when it is for good cause and in the best interests of the City.

WITHDRAWAL OF PROPOSALS

Bidders may withdraw their RFQ response at any time prior to the time specified in the advertisement as the closing time for the receipt of bids.

However, no bidder shall withdraw or cancel his response for a period of 180 calendar days after said advertised closing time for the receipt of proposals.

DEFAULT PROVISION

In case of default by the bidder or the contractor, the City of Columbus may terminate and may procure the articles or services from other sources and hold the bidder or contractor responsible for any excess costs occasioned or incurred thereby.

SIGNATURE REQUIRED

By submitting this response electronically, bidder/proposer is affixing an electronic signature as defined by the Ohio Uniform Transactions Act.

Said signature represents that he/she has the authority to bind the entity to the terms and conditions contained herein.

APPLICABLE LAWS

The Revised Code of the State of Ohio, the Charter of the City of Columbus, and all City ordinances insofar as they apply to the laws of competitive bidding, contracts, and purchases, and wage theft prevention, are made a part hereof.

PRICING

Bidders are to quote firm or fixed prices for the duration of any contract which may be a result of this proposal unless otherwise noted in the specifications. In case of discrepancy in computing the amount of the bid, the UNIT PRICE quoted will govern.

Quotations are requested F.O.B. destination. If quoted F.O.B. Shipping Point include freight estimate and full value insurance cost.

CONTRACT AND BOND

The bidder to whom an award is made will be required to execute a written contract with the City of Columbus, Ohio within ten days after receiving such contract for execution, and if specified in the legal notice, furnish a good and approved bond conditioned upon the faithful performance of the same. The proposal, contract, proposal bond, (if applicable), and performance bond (if applicable) shall be in the form herein specified.

If, at any time during the continuance of the Contract, any surety shall, in the opinion of the Finance & Management Director, become irresponsible, then said Director shall have the right to require additional and sufficient surety or sureties. The Contractor shall furnish the surety or sureties to the satisfaction of the said Director, within ten (10) days after notice. In default thereof the default provision herein shall apply.

LIABILITY, INSURANCE, LICENSES AND PERMITS

Where bidders are required to enter or go onto City of Columbus property to deliver materials or perform work or services as a result of bid award, the bidder will assume full duty, obligation and expense of obtaining all necessary licenses, permits, and insurance when required.

The bidder shall be liable for any damages or loss to the City occasioned by negligence of the bidder (or his agent) or any person the bidder has designated in the completion of his contract as a result of his bid.

Particular attention is directed to the statutory requirements of the State of Ohio relative to the licensing of corporation organized under the Laws of any other State.

TAXES

Federal and/or State Taxes are not to be included in prices quoted. The successful bidder will be furnished an exemption certificate if needed.

SAMPLES

Samples, when requested, must be furnished free of expense to the City and if not destroyed, will upon request be returned at the bidder's expense.

DELIVERY

Time will be of the essence for any orders placed as a result of this bid.

Purchaser reserves the right to cancel such orders or any part thereof, without obligations if delivery is not made within the time(s) specified.

Delivery shall be made during normal working hours and to the destination shown on the proposal.

QUALITY

Unless otherwise stated by the bidder, the RFQ response will be considered as being in strict accordance with the specifications outlined in the Bid Document.

References to a particular trade, manufacturer's catalog or model number are made for descriptive purposes to guide the bidder in interpreting the requirements of the City. They should not be construed as excluding proposals on other types of materials, equipment and supplies. However, the bidder, if awarded the contract, will be required to furnish the particular item referred to in the specifications or description unless a departure or substitution is clearly noted and described in the proposal.

CHANGES AND ADDENDA TO BID DOCUMENTS

Each change or addenda issued in relation to this bid document will be published on the City’s Vendor Services website no less than five (5) working days prior to the scheduled bid opening date. In addition, to the extent possible, notice will be e-mailed to each person registered as having interest in the commodities selected for this bid. Total bid inquiry or specific item cancellations may be issued later than that time specified above.

WITHHOLDING OF INCOME TAX

All bidders are advised that in order for a contract to bind the City, each contract must contain the provisions found in Chapter 362 C.C.C.

with regard to income taxes due or payable to the City of Columbus for wages, salaries and commissions paid to the contractor's employees as well as requiring those contractors to ensure that subcontractors withhold in a like manner.

CAMPAIGN CONTRIBUTIONS

Contractor hereby certifies the following: that it is familiar with Ohio Revised Code (“O.R.C.”) Section 3517.13; that all applicable parties listed in Subsection (I) or (J) of O.R.C. Section 3517.13 are in full compliance with Subsection (I) and (J) of that Section; that it is eligible for this contract under the law and will remain in compliance with O.R.C. Section 3517.13 for the duration of this contract and for one year thereafter.

PUBLIC RECORDS REQUESTS

The City of Columbus, as a political subdivision of the State of Ohio, is subject to Ohio Revised Code Chapter 149, known as the Ohio Public Records Law. Consequently, the Offeror understands that ALL documents submitted in response to this solicitation are considered public records and WILL be released when a public records request is

INFORMATION FOR BIDDERS

-3B- (INFORMATION FOR BIDDERS continued) made by news media, competitors, or other interested parties, in accordance with the law. If you contend that certain CLEARLY MARKED portions of your response constitute an exception to Ohio’s public records law, you MUST submit your legal basis in support of that assertion with your response.

If a public records request is made for any portion of the documents that you have submitted and you have NOT clearly marked such documents as information constituting an exception to Ohio’s public records law, your information will be released immediately.

If a public records request is made for such information and you HAVE clearly marked portions of your response as information constituting an exception to Ohio’s public records law, AND you have submitted the legal basis supporting such claim, the City will release a redacted version of your information to the requestor and notify you that a request was made and that a redacted version of your response was released.

Should the requestor indicate that the redacted version is not sufficient for their purposes, you then will be IMMEDIATELY responsible for obtaining an order from a Court of competent jurisdiction in Franklin County, Ohio enjoining release of your clearly marked information constituting an exception to Ohio’s public records law.

If a public records request is made for such information and you HAVE clearly marked portions of your response as information constituting an exception to Ohio’s public records law, but you have NOT submitted the legal basis supporting such claim, the City WILL RELEASE your information to the requestor and notify you that a request was made and that your response was released.

DO NOT mark your entire response/submittal as information constituting an exception to Ohio’s public records law. If your entire response/submittal is so marked, the City of Columbus will not consider your offer.

INFORMATION FOR BIDDERS (Continued)

-3C- Revised 09-07-21

IN THE EVENT OF A CONTRACT

1. Where applicable according to the specifications successful seller shall transfer and deliver to City goods which conform to the specifications.

2. The City shall accept from seller goods that conform to the specifications, and shall pay for the goods in accordance with the terms of an agreement, which may result from this proposal.

3. The risk of loss from any causality to the goods regardless of the cause of the casualty shall be on seller until the goods have been delivered at the address designated in the order and are approved after inspection by the City.

4. Seller warrants and represents that seller has absolute and good title to and full right to dispose of the goods, and that there are no liens, claims, or encumbrances of any kind against the goods, and at the time of delivery shall be free from any security interests or other lien or encumbrance.

5. If there is a breach by seller of the warranty against encumbrances granted by seller in an agreement, which may result from this proposal, the City shall have the option to cancel an agreement, which may result from this proposal.

6. Seller shall defend any action brought against the City so far as the action is based on a claim that the goods, or any part of the goods, furnished under an agreement which may result from this proposal constitutes an infringement of any patent of the United States or a trademark. Seller shall be notified promptly in writing of the action and be given authority, information, and assistance, at the expense of seller, for the defense of the action. Seller shall pay all damages and costs awarded in the action. In case the goods or a part thereof are held to constitute infringement and the use of the goods or part thereof is enjoined, seller shall, at the expense of the seller, either procure for the City the rights to continue using the goods, replace the goods or a part hereof with non-infringing goods of equal or better quality, modify the goods so that the goods become non-infringing while continuing to meet or exceed the original specifications, or retake the goods and refund the purchase prices and the transportation and installation costs of the goods at the option of the City.

7. Seller warrants that (1) the goods to be supplied pursuant to an agreement which result from this proposal are fit and sufficient for the purpose intended, (2) the goods are merchantable, of a good quality, and free from defects, whether patent or latent, in material or workmanship and (3) the goods sold to the City pursuant to an agreement which may result from this proposal conform to the specifications. The particular purpose of which the goods are required may be set forth in the specifications.

8. The benefit of any warranty made in an agreement which may result from this proposal by seller shall extend to the City and to the employees of the City, any employee of the City may bring an action directly against seller for damages or injuries sustained by the employee resulting from any breach of warranty by seller.

9. All goods ordered shall be subject to final inspection and approval at the facility of the City designated for delivery. Any goods, which do not conform to the order of the City, may be rejected by the City.

The City may hold any goods rejected pending instructions from the seller or the City may return goods to seller at seller's expense.

10. If any tender or delivery by seller is rejected by the City for nonconformity, no notice of intention to cure can be effective unless it is received by the City agency within five (5) days after notice of rejection is sent to seller.

11. The liability of the City for either non-acceptance of conforming goods or repudiation of the agreement which might result from this proposal shall be limited to the difference between the market price at the time and place for tender of the goods and the unpaid sales price together with any incidental damages, but less expenses paid in consequence of the breach by the City.

12. An agreement which may result from this proposal shall not be modified or altered by any subsequent course of performance between parties or by additional terms contained in any subsequent documents unless said additional or differing terms are incorporated by contract modification authorized to be entered into by ordinance.

13. Contractor shall protect, indemnify and save the City harmless from and against any damage, cost, or liability, including reasonable attorneys’ fees, resulting from claims for any or all injuries to persons or damage to property arising from intentional, willful or negligent acts or omissions of Contractor, its officers, employees, agents, or Subcontractors.

14. The City will not indemnify the contractor and is prohibited from doing so.

15. This Contract may not be assigned or otherwise transferred to others by the Contractor without the prior written consent of the City.

If this Contract is so assigned, it shall inure to the benefit of and be binding upon any respective successors and assigns (including successive, as well as immediate, successors and assignees) of the Contractor.

16. The signatories to this Contract represent that they have the authority to bind themselves and their respective organizations to this Contract.

17. In the event either party is unable to perform its obligations under the terms of this Agreement because of acts of God, strikes, equipment or transmission failure or damage reasonably beyond its control, epidemics, pandemics, or other causes reasonably beyond its control, such party shall not be liable for damages to the other for any damages resulting from such failure to perform or otherwise from such causes.

LOCAL CREDIT

Pursuant to City of Columbus Ordinance # 2607-2012, in determining the lowest bid for a contract the local bidder credit will not be applied.

WAGE THEFT PREVENTION

Chapter 377 of the Columbus City Codes is hereby incorporated into the contract and seller is required to comply with said chapter. This includes, but is not limited to reporting requirements and the obligation to review the commission list of contractors and subcontractors that received an adverse determination. Penalties for failure to comply with the wage theft prevention code include suspension for three years, up to permanent disbarment.

CERTIFICATE OF TITLE ON EQUIPMENT

If applicable to this purchase, all documents required to obtain a State of Ohio Certificate of Title must be delivered to:

Fleet Management Administrator City of Columbus/Fleet Management Div.

4211 Groves Road Columbus, Ohio 43232

After signature by the Fleet Management Administrator, an original title is to be delivered to the above address within three (3) days. No payment for vehicles requiring a title will be authorized by the Fleet Management Administrator until a valid title is received.

REMEDIES

All claims, counterclaims, disputes and other matters in question between the City, its agents and employees, and the Contractor arising out of or relating to this agreement or its breach will be decided in a court of competent jurisdiction within the County of Franklin, State of Ohio.

OFFERORS TERMS AND CONDITIONS

Terms and conditions, submitted with this proposal, which are contrary to City Code or Charter shall be disregarded for the purpose of any subsequent contract. The successful bidder shall be notified as to which terms and conditions, if any, have been deleted.

PUBLICATIONS

The Contractor agrees to submit to the City’s Contract Administrator all advertising, sales promotion, and other publicity matters relating to this Contract wherein the City’s name is mentioned or language used from which the connection of the City’s name therewith may, in the City’s judgment, be inferred or implied. The Contractor further agrees not to publish, or use such advertising, sales promotion, or publicity matter without the prior written consent of the City except that may be required under law.

City of Columbus RFQ032928 Department Public Utilities/Division of Water

Compact Track Loader Detailed Specifications

1.0 SCOPE AND CLASSIFICATION

1.1 Scope: It is the intent of the City of Columbus, Department of Public Utilities/Division of

Water to obtain formal bids to establish a contract for the purchase of Two (2) Compact Track Loaders.

1.2 Classification: The contract resulting from this bid proposal will provide for the purchase and immediate delivery of Two (2) Compact Track Loaders and Attachments.

All Offerors must document the manufacture certified reseller partnership. Bidders are required to show experience in providing this type of equipment and warranty service as detailed in these specifications.

1.2.1 Bidder Experience: The offeror must submit an outline of its experience and work history in these types of equipment and warranty service for the past five years.

1.2.2 Bidder References: The offeror shall have documented proven successful contracts from at least four customers that the offeror supports that are similar in scope, complexity, and cost to the requirements of this specification.

1.3 Specification Questions: Questions regarding this bid must be submitted on the

Vendor Services portal by 11:00 am Monday, July 13, 2026. Responses will be posted on the RFQ on Vendor Services no later than Thursday, July 16, 2026, at 11:00 am.

1.4 For additional information concerning this bid, including procedures on how to submit a proposal, you must go to the City of Columbus Vendor Services web site at https://columbusvendorservices.powerappsportals.com/ and view this bid number.

2.0 APPLICABLE PUBLICATIONS AND STANDARDS

2.1 Ohio Department of Transportation (O.D.O.T.)

2.2 Federal Motor Vehicle Safety Standards (FMVSS)

2.3 All applicable Federal and State of Ohio weight laws

2.4 Occupational Safety and Health Administration (OSHA) Safety Requirements

2.5 Lighting Equipment: Department of Transportation (D.O.T.) and

Federal Motor Vehicle Safety Standards (F.M.V.S.S)

2.6 Environmental Protection Agency (E.P.A.) requirements.

2.7 References to a particular trade or manufacturer's model number are made for descriptive purposes to guide the bidder in interpreting the requirements of the City.

https://columbusvendorservices.powerappsportals.com/

They should not be construed as excluding proposals on other types of materials, equipment and supplies.

3.0 REQUIREMENTS

3.1 General Information:

3.1.1 Term: The contract awarded as a result of this proposal is for a one-time purchase.

3.1.2 Pricing: Bidders are to bid firm or fixed prices, FOB Destination, Freight Prepaid and Allowed. All pricing must include manufacturer warranty. All manufacturer warranties will be passed on to the City of Columbus.

3.1.3 Quantity: Two (2) Compact Track Loaders, and attachments.

3.1.4 Quality Standards: The City intends to purchase new, unused and the most current model. The specifications describe a minimum acceptable requirement which a bidder has to meet. However, the bidder is allowed to exceed a minimum requirement where the excess enhances the function of the unit and which the City can accept. It is not acceptable for a bidder to exceed a maximum desired limit.

3.2 Bidder Requirements: The City will use the requirements of this section to determine if each bidder meets the minimum standards to be considered a responsible bidder.

Please print, complete and attach Reference pages and attach any supplemental pages as may be necessary to meet these requirements. For instructions on how to attach a document to your bid, please refer to the Vendor Services User Guide.

3.2.1 Experience Required: Documentation shall include (at a minimum) information meeting the following criteria.

3.2.1.1 Equipment and Warranty Capabilities: Offerors must document, and submit in a letter attached to the bid, their capability of providing the equipment and warranty service specified herein.

3.2.1.2 Manufacturer Relationship: The offeror shall provide the history of their relationship with manufacturer(s) that will potentially be providing these types of equipment/parts and warranty service for the past five years, including but not limited to the following:

a) Length of the relationship

b) Level of the relationship

c) A brief history of the relationship

3.2.1.3 Service/Parts: The offeror must have a local service and parts provider to respond to warranty repairs within 24 hours of notification from the City of Columbus. Local service and parts provider must be able to provide service and parts after the warranty period. Offerors local service and parts provider must be willing to register with the City of Columbus as a vendor to be compliant.

3.2.2 References: The offeror shall have documented proven successful contracts from at least four customers that the offeror supports that are similar in scope, complexity, and cost to the requirements of this specification.

3.2.2.1 Contact Information Required: The reference contact information shall include the customer name, customer e-mail address, street address, telephone number, fax number, contact name and equipment purchase date.

3.2.2.2 Equipment / Warranty Service Information: A description of the equipment/parts provided and type of warranty service that was provided.

3.2.3 Subcontractor Information Required: If subcontractor(s) are to be used, please list names, addresses, telephone numbers and a contact person for each subcontractor. All subcontracts must have valid contract compliance certification.

3.2.3.1 Subcontractor Contact: Should the offeror use subcontractors, the City shall use the offeror as the primary contact point.

3.2.4 Specification Questions: Questions regarding this bid including any exceptions and/or suggested changes to the requirements must be submitted on the vendor services portal by 11:00 am (local time) on Monday, July 13, 2026. Responses and any necessary addenda will be posted as an amendment to this RFQ on the City’s Vendor Services portal no later than 11:00 a.m. (local time) on Thursday, July 16, 2026.

The City strongly encourages bidders to submit exceptions and/or changes during this stage of the process. Bidders submitting exceptions and/or changes before this date will greatly reduce the likelihood of their bid being rejected as non-responsive to the specifications. Bidders whom have not registered and created a new user on the City's portal https://columbusvendorservices.powerappsportals.com/ are strongly encouraged to do so. Notice of any pre-bid notes and addenda will only be sent to Bidders whom have registered at the site.

3.2.4.1 For further instructions on how to submit "Vendor Questions" through the

Vendor Portal, please see Section "Add Vendor Questions" provided in the City of Columbus Vendor Services User Guide.

3.2.4.2 The City has instructional videos to assist bidders at the portal. Tutorial videos are available to be viewed through You Tube or by clicking the following link:

https://columbusvendorservices.powerappsportals.com/ https://www.youtube.com/channel/UCTIkkGNM7GHIITzoqQVNJlA/videos ?shelf_id=0&view=0&sort=dd

3.3 Product Requirement Specifications:

SECTION

NUMBER

SPECIFICATION DESCRIPTION DESCRIBE ACTUAL PRODUCT BID

3.3.1

ITEM NO. 1 Bobcat T66 Compact Track Loader or equivalent.

3.3.1.1 STANDARD EQUIPMENT: The

loader specified within this document, unless otherwise noted, shall have the following standard equipment at a minimum.

3.3.1.2

ENGINE

3.3.1.2.1 The engine shall be a minimum

74HP

3.3.1.2.2

Loaders shall have a turbocharged diesel engine.

3.3.1.2.3 Block heater optional

3.3.1.3 TRANSMISSION

3.3.1.3.1 Transmission shall be hydraulic

with High and low travel speeds

3.3.1.3.2 Travel speed low shall be a

minimum of 7MPH

3.3.1.3.3 Travel speed high shall be a

minimum of 10MPH

3.3.1.4

Tracks

3.3.1.4.1 Loader shall have a minimum 15

inch track width https://www.youtube.com/channel/UCTIkkGNM7GHIITzoqQVNJlA/videos?shelf_id=0&view=0&sort=dd https://www.youtube.com/channel/UCTIkkGNM7GHIITzoqQVNJlA/videos?shelf_id=0&view=0&sort=dd

3.3.1.5

HYDRAULICS

3.3.1.5.1 loader shall have a hydraulic system minimum auxiliary standard flow of 17GPM

3.3.1.5.2 Loader shall have a minimum

auxiliary high flow of 26GPM

3.3.1.5.3 Hydraulic system shall have a relief

set max of 3500PSI with quick couplers.

3.3.1.6

ELECTRICAL SYSTEM

3.3.1.6.1 The electrical system shall be

equipped with the following features:

3.3.1.6.2

12-volt electrical system with a minimum of one (1) battery with

1000CCA

3.3.1.6.3

2 front LED work lights

3.3.1.6.4

2 rear LED work lights

3.3.1.6.5

2 Rear LED stop lights

3.3.1.6.6

Backup beeper

3.3.1.7

LOADER AND LINKAGE

3.3.1.7.1 Loader and linkage / bucket shall

have the following minimum

3.3.1.7.2 Dual loader lift cylinders

3.3.1.7.3 Dual bucket cylinders

3.3.1.7.4 Powered Bob-Tach quick attach

implementation.

3.3.1.8 OPERATOR ENVIRONMENT/CAB:

3.3.1.8.1 The Operator compartment shall

have the following features

3.3.1.8.2 Enclosed Cab

3.3.1.8.3 Top, rear, and side windows

3.3.1.8.4 Front windshield wiper with washer

functions

3.3.1.8.5 Roll over protective structure

(ROPS) to meet SAE-J1040 &ISO

3.3.1.8.6 Falling object protective structure

(FOPS) meets SAE-J1043 & ISO 3449 Level I.

3.3.1.8.7 Instrumentation shall include at

minimum:

3.3.1.8.7.1 Engine Temperature

3.3.1.8.7.2 Fuel Gauges

3.3.1.8.7.3 Hour meter

3.3.1.8.8 Enclosed cab with air conditioning

and heater.

3.3.1.8.9 Back up Camara

3.3.1.8.10 Fully adjustable suspension seat

with headrest

3.3.1.9 OPERATOR CONTROLS

3.3.1.9.1 Loader shall be equipped with

Bob-Tach coupler to allow ease of removal of bucket and forks

3.3.1.10 WIRING

3.3.1.10.1

In the interest of durability and longevity, all electrical wiring shall be color coded full length runs, enclosed within wire loom, terminating in waterproof junction boxes in the cab.

3.3.1.11 ROLLOVER PROTECTION:

3.3.1.11.1 The unit shall be equipped with an

OSHA approved roll over protection system.

3.3.1.12 PAINT

3.3.1.12.1 The Loader shall be painted with a

rust resistant primer and either the manufacturer’s construction yellow or white

3.3.1.15

WEIGHT:

3.3.1.15.1 Maximum of 9,000 lbs. operating

weight

3.3.1.16

DIMENSIONS::

3.3.1.16.1 Overall height shall be a maximum

of 84”

3.3.1.16.2 Hinge pin height shall be a

maximum of 120” fully raised

3.3.1.16.3 Overall length shall not exceed

108” without attachments

3.3.1.16.4 Dump height shall be a minimum of

35”

3.3.1.16.5 Tipping load shall be a minimum of

7,000lbs

3.3.2

ATTACHMENTS: The following attachments must be designed to work specifically with the Compact Track Loader (ITEM NO.1) unit that the bidder is offering on line one Bidders shall submit appropriate manufacturer details, as per specification 6.3.1, for all attachments with their bid. The City reserves the right to purchase all, one, some or none of the attachments that are bid with this Backhoe Loader

3.3.2.1

ITEM NO. 2: One (1) 68” angle broom.

3.3.2.2

ITEM NO. 3: One (1) 62” Industrial Bucket Grapple

3.3.2.3 ITEM NO. 4 One (1) 8 ft Snow

pusher with angle blade and removable pusher box.

3.3.2.4 ITEM NO. 5 One (1) 68” heavy duty

material bucket

3.4 Product Requirement Specifications:

SECTION

NUMBER

SPECIFICATION DISCRIPTION DESCRIBE ACTUAL PRODUCT BID

3.4.1

ITEM NO. 6 Bobcat T770 Compact Track Loader or equivalent.

3.4.1.1 STANDARD EQUIPMENT: The

loader specified within this document, unless otherwise noted, shall have the following standard equipment at a minimum.

3.4.1.2

ENGINE

3.4.1.2.1 The engine shall be a minimum

92HP

3.4.1.2.2

Loaders shall have a turbocharged diesel engine.

3.4.1.2.3 Block heater optional

3.4.1.2.4 Forestry muffler guard

3.4.1.3 TRANSMISSION

3.4.1.3.1 Transmission shall be hydraulic

with High and low travel speeds

3.4.1.3.2 Travel speed low shall be a

minimum of 6MPH

3.4.1.3.3 Travel speed high shall be a

minimum of 10MPH

3.4.1.4

Tracks

3.4.1.4.1 Loader shall have a minimum 17

inch track width

3.4.1.5

HYDRAULICS

3.4.1.5.1 loader shall have a hydraulic system minimum auxiliary standard flow of 23GPM

3.4.1.5.2 Loader shall have a minimum

auxiliary high flow of 36GPM

3.4.1.5.3 Hydraulic system shall have a relief

set max of 3500PSI with quick couplers and forestry guard.

3.4.1.6

ELECTRICAL SYSTEM

3.4.1.6.1 The electrical system shall be

equipped with the following

3.4.1.6.2

12-volt electrical system with a minimum of one (1) battery with

1000CCA

3.4.1.6.3

2 front LED work lights with forestry guards.

3.4.1.6.4

2 rear LED work lights with forestry guards

3.4.1.6.5

2 Rear LED stop lights with forestry guards.

3.4.1.6.6

Backup beeper

3.4.1.7

LOADER AND LINKAGE

3.4.1.7.1 Loader and linkage / bucket shall

have the following minimum

3.4.1.7.2 Dual loader lift cylinders

3.4.1.7.3 Dual bucket cylinders

3.4.1.7.4 Powered Bob-Tach quick attach

implementation.

3.4.1.8 OPERATOR ENVIRONMENT/CAB:

3.4.1.8.1 The Operator compartment shall

have the following features

3.4.1.8.2 Enclosed Cab

3.4.1.8.3 Top, rear, and side windows

3.4.1.8.4 Front windshield wiper with washer

functions

3.4.1.8.5 Roll over protective structure

(ROPS) to meet SAE-J1040 &ISO

3.4.1.8.6 Falling object protective structure

(FOPS) meets SAE-J1043 & ISO 3449 Level II

3.4.1.8.7 Instrumentation shall include at

minimum:

3.4.1.8.7.1 Engine Temperature

3.4.1.8.7.2 Fuel Gauges

3.4.1.8.7.3 Hour meter

3.4.1.8.8 Enclosed cab with air conditioning

and heater.

3.4.1.8.9 Back up Camara

3.4.1.8.10 Fully adjustable suspension seat

with headrest

3.4.1.8.11 Loader shall have Forestry

applications kit installed on cab.

3.4.1.9 OPERATOR CONTROLS

3.4.1.9.1 Loader shall be equipped with

Bob-Tach coupler to allow ease of removal of bucket and forks

3.4.1.10 WIRING

3.4.1.10.1

In the interest of durability and longevity, all electrical wiring shall be color coded full length runs, enclosed within wire loom, terminating in waterproof junction boxes in the cab.

3.4.1.11 ROLLOVER PROTECTION:

3.4.1.11.1 The unit shall be equipped with an

OSHA approved roll over protection system.

3.4.1.12 PAINT

3.4.1.12.1 The Loader shall be painted with a

rust resistant primer and either the manufacturer’s construction yellow or white

3.4.1.15

WEIGHT:

3.4.1.15.1 Maximum of 11,000 lbs. operating

weight

3.4.1.16

DIMENSIONS::

3.4.1.16.1 Overall height shall be a maximum

of 84”

3.4.1.16.2 Hinge pin height shall be a

maximum of 132” fully raised

3.4.1.16.3 Overall length shall not exceed

114” without attachments

3.4.1.16.4 Dump height shall be a minimum of

33”

3.4.1.16.5 Tipping load shall be a minimum of

9,500lbs

3.5

ATTACHMENTS: The following attachments must be designed to work specifically with the Compact Track Loader (ITEM NO.7) unit that the bidder is offering on line Seven Bidders shall submit appropriate manufacturer details, as per specification 6.3.1, for all attachments with their bid. The City reserves the right to purchase all, one, some or none of the attachments that are bid with this Backhoe Loader

3.5.1

ITEM NO. 7: One (1) 61” Forestry Drum Mulcher

3.5.2

ITEM NO 8. : One (1) 80” Heavy Duty material bucket

3.6 Alternates: Bids will be considered on units complying with the specifications. All alternates must be detailed in an attached letter to bid and the Manufacturer and Model clearly identified. Explanations must fully state what is to be furnished. All alternates must meet or exceed specifications. The City of Columbus reserves the right to determine whether any proposed alternates are within the specifications.

4.0 DEMONSTRATION AND INSPECTION

4.1 Demonstration: The City reserves the right to require a demonstration of any equipment prior to award of the bid. Such demonstration shall be conducted, at the sole discretion of the City, either on roads in the City of Columbus, or in another municipal setting in Franklin County, Ohio where such equipment is in daily operation. All costs associated with such demonstration are to be the responsibility of the supplier. All demonstrations shall be concluded within five (5) working days after notification of demo request. Failure to comply may be used as a basis for rejection of the bid.

4.2 Inspection: All parts shall be thoroughly, physically inspected upon delivery by an authorized representative of the Department of Public Utilities/Division of Power and Water for verification of conformance to the specifications. Any damaged, defective, or substandard item shall be promptly removed by the supplier, and replaced at no cost to the City of Columbus. The supplier will be responsible for all shipping costs.

5.0 ORDERING, DELIVERY and INVOICING

5.1 Ordering Procedure: A written purchase order will be established by the Director of

Finance and Management. The Purchase Order will have the delivery information and invoice information.

5.2 Delivery days after Order: Bidder shall insert in the "Discount" tab of the bid the Lead

Time expressed as the number of calendar days after receipt of order that delivery will be made. Vendors shall state actual delivery time in calendar days in the space provided under Delivery/Payment Terms. Delivery time may be a factor in determining award of bid. Failure to deliver in the days proposed may lead the City to consider the contract holder in partial or full breach of the contract. In the case of such breach, the City reserves the right to pursue all remedies and actions available under this contract and relevant law.

5.2.1 Delivery Location: The equipment will be delivered FOB Destination Freight

Prepaid and Allowed (Seller Bears All Freight Costs) to:

Water Division 910 Dublin Road

Columbus, Ohio 43215

5.2.2 The City of Columbus shall be notified no less than 24 hours prior to actual delivery by notifying Deryl Seward (or designee,) at the Division of Fleet Management (614) 645-6205, and Ryan Conley, at the Department of Public Utilities, (614) 724-0128, twenty-four (24) hours in advance. Delivery can be made Monday through Friday 7:00 AM – 2:30 PM (local time), except on a City of Columbus recognized holiday. City of Columbus personnel will uncrate any carton packaging. The contact information and delivery location will be will be included on the Purchase Order.

5.2.3 All equipment must be delivered with all fluid levels at the manufacturer’s recommended full capacity. All manufacturer’s pre-delivery service and inspections should be completed prior to delivery to the City of Columbus.

Written certification of the complete equipment’s actual tare weight shall be included when the vehicle is delivered.

5.3 Packaging: All items must be packaged in the minimum standard packing material designed to protect against damage during shipment. Note the use of Environmentally Friendly materials is encouraged.

5.4 Title:

5.4.1 All documents required to obtain a State of Ohio Title must be delivered to Jason

Smith at the Division of Fleet Management, 4211 Groves Road, Columbus, Ohio

43232. All forms must be properly completed. NO BLANK FORMS WILL BE

ACCEPTED.

5.4.2 After signature by the Division of Fleet Management, an Ohio Certificate of Title shall be delivered to the City of Columbus, Division of Fleet Management within three (3) days. Fleet Management will not authorize payment for any vehicle until they receive a valid State of Ohio Title or certificate of origin.

5.4.3 All titles are to be made out to City of Columbus, 4211 Groves Rd, Columbus, Ohio 43232.

5.5 Invoicing: Each invoice shall show the City Purchase Order number, a brief description identifying the item, the unit price, and the total amount. The invoice amount must exactly match the purchase order amount in accordance with the bid proposal.

6.0 NOTES

6.1 Online Bidding Instructions: Bidders are requested to quote firm or fixed prices on the corresponding line item(s) only. Within the "Comment" section of each line bidders are requested to provide the make, model and manufactured year of the unit quoted. It is understood that all parts that may not be specifically mentioned must be included to make the unit operational and complete.

6.1.1 Alternates: Bids will be considered on units complying with the specifications. All alternates must be detailed in an attached letter to bid. Explanations must fully state what is to be furnished. All alternates must meet or exceed specifications.

The City of Columbus reserves the right to determine whether any proposed alternates are within the specifications.

6.1.1.1 Attachments: For instruction on attaching documents to online quotes, please see the "City of Columbus Vendor Services User Guide", made available through the Vendor Portal.

6.2 Warranty: The equipment specified herein shall be covered by the manufacturer's warranty at no additional charge. Bidders shall submit warranty on a separate sheet attached to the bid proposal.

6.2.1 Warranty Period: The warranty period shall be a minimum of 12 months at no additional charge. Bidders shall submit copies of the warranty as an attachment with the bid proposal.

6.2.2 Delayed Warranty: Bidder shall submit on a separate sheet attached to the bid a procedure for delayed warranty for starting dates to cover the interval between time of delivery of the complete vehicle and the actual date that the equipment is placed in service by the City. This delayed time period will cover inspection, operator and mechanic training, etc.

6.2.3 Fully Franchised: The bidder shall contract with a warranty service provider whose primary business is the sale and/or repair of the equipment proposed in this bid proposal. Warranty service must be performed by a franchised OEM dealer that is authorized by the manufacturer(s) to perform warranty service. The warranty work shall be the responsibility of the successful bidder and the successful bidder shall coordinate all warranty work. Any defects shall be corrected and the equipment returned to the City within ten (10) days of written (mail, email or fax) notification of the service need. Any defects shall be corrected without cost to the City of Columbus. Under no circumstances shall the "out of operation" time of the equipment exceed ninety (90) days. Warranty work is not deemed complete until Fleet Management has accepted work as satisfactory.

6.2.4 Warranty Service Logistics: Cost of transport of equipment for warranty purposes shall be the responsibility of the successful bidder. The successful bidder will be required to pick-up the equipment and transport it to the warranty service location. At the successful bidder’s discretion, the equipment may be transported (not towed) to a location within Franklin or contiguous counties. For a warranty service location outside of a contiguous county, the equipment must be transported (not towed).

6.3 Literature:

6.3.1 To aid in the evaluation of bids, all bidders are to furnish with this bid current published literature and Dealer’s specifications that best explains the unit offered, model and identification of the options that meet or exceed the specifications.

Published literature shall include pictures and complete descriptive matter.

6.3.2 Bidders shall submit a copy of dealer’s build sheets with bid.

6.4 Manuals:

6.4.1 The successful bidder shall supply two (2) copies of all parts lists, service, maintenance, operation, and overhaul manuals for the chassis, engine, transmission, drive line, electrical, fuel, and emissions upon delivery of the equipment to the City of Columbus. The City of Columbus would prefer that all parts and service manuals be supplied on USB flash drive.

6.5 Pre-build Meeting: The successful bidder shall attend a “pre-build” meeting at the

Public Utilities complex. 910 Dublin RD, Columbus, OH 43215

6.6 Correspondences: During the bidding and evaluation process Offerors are strictly prohibited from communicating with any City employees or officers regarding the solicitation. Any communication from the vendor to the City should be limited to only the contact(s) listed in the RFQ and/or below. A violation of this section on the part of the Offeror may lead to disqualification.

All correspondences regarding this bid should be sent via email to lsbells@columbus.gov, or:

City of Columbus Purchasing Office 77 N. Front Street, 5th Floor

Columbus, OH 43215 ATTN: Lori Bells mailto:lsbells@columbus.gov

City of Columbus Department of Water and Power / Division of Water

Track Loaders

REFERENCES

The bidder must briefly document its capabilities and submit an outline of its experience and work history in Track Loaderrs for the past five years by submitting the contact information of References from four (4) separate contracts sales. References should consist of projects of a similar scope, complexity, and cost.

Business Name: ___________________________________________ Tel #.________- __________

Address: ______________________________________________ ___________________________

E-mail Address: ____________________________________________ Fax #.________- __________

Contact: _______________________________ Purchase date: ______________________________

Equipment Provided/Warranty Service Performed:

Business Name: ___________________________________________ Tel #.________- __________

Address: ______________________________________________ ___________________________

E-mail Address: ____________________________________________ Fax #.________- __________

Contact: _______________________________ Purchase date: ______________________________

Equipment Provided/Warranty Service Performed:

Business Name: ___________________________________________ Tel #.________- __________

Address: ______________________________________________ ___________________________

E-mail Address: ____________________________________________ Fax #.________- __________

Contact: _______________________________ Purchase date: ______________________________

Equipment Provided/Warranty Service Performed:

Business Name: ___________________________________________ Tel #.________- __________

Address: ______________________________________________ ___________________________

E-mail Address: ____________________________________________ Fax #.________- __________

Contact: _______________________________ Purchase date: ______________________________

Equipment Provided/Warranty Service Performed:

SUBCONTRACTORS INFORMATION (IF APPLICABLE)

Business Name: ________________________________ Tel #.________- __________

Address: ____________________________________________________________

E-mail Address: ________________________________ Fax #.________- __________

Contact: ____________________ Work performed from ____________to __________

Work Performed: _______________________________________________________

Business Name: ________________________________ Tel #.________- __________

Address: __________________________________ ___________________________

E-mail Address: ________________________________ Fax #.________- __________

Contact: ___________________ Work performed from ____________to ___________

Work Performed: _______________________________________________________