Project Grant N000142412346

This $217,041 National Science Foundation project grant supports research at Virginia Polytechnic Institute & State University to develop acoustic holography-enabled additive manufacturing of high-resolution multifunctional composites. The two-year award under the Engineering (47.041) federal grant program will conduct fundamental research to integrate acoustic holography and digital light processing for photo polymerization printing. This will allow for precise spatial control of embedded...

This Project Grant award from the National Science Foundation's Engineering program (CFDA 47.041) supports fundamental research by Arizona State University (ASU) to enable additive manufacturing of high-quality fiber-reinforced polymer composites through in-situ thermal polymerization of the matrix resin. The total award amount is $647,188 with a project period from November 1, 2024 to April 30, 2028. The research aims to develop a new composite manufacturing platform that uses a remote stimulus...

This $578,437 National Science Foundation project grant supports research at Texas A&M University to develop fast manufacturing techniques for high-performance thermoplastic polymer composites. The research aims to engineer the crystallinity of these composites during fast processing to achieve high stiffness, strength and toughness concurrently. Nanomaterials consisting of cellulose nanocrystals and graphene nanoplatelets will be used to control crystallinity without hazardous solvents...

This $199,522 National Science Foundation project grant supports research at the University of Houston Clear Lake to develop additive manufacturing techniques for composite tooling. Specifically, the university will conduct fundamental research to understand fused filament fabrication of thermoplastic composite molds embedded with heating wires. This will enable energy-efficient production of thermoset composites without costly autoclave ovens. The research aims to establish a dual-extrusion...

This Project Grant award from the National Science Foundation (NSF) Directorate for Engineering (CFDA 47.041) totaling $344,918 will establish a collaborative research program at Florida International University (FIU) to develop advanced data-driven approaches for additive manufacturing (AM) or 3D printing of materials with locally tunable electrical and mechanical properties. The research aims to create new polymer resin formulations for digital light processing (DLP) 3D printing that can...

This Project Grant from the National Science Foundation's Division of Civil, Mechanical, and Manufacturing Innovation, under the Engineering program (CFDA 47.041), provides $481,998 to support research at the University of California, Berkeley on developing a new additive manufacturing process for multi-material and multi-functional part fabrication. The principal investigator will conduct fundamental research into a charge-programmed additive microfabrication technique to rapidly pattern...

This Project Grant award from the National Science Foundation's (NSF) Integrative Activities program (CFDA 47.083) provides $300,000 to Clemson University to advance the capability of metal additive manufacturing (AM) technologies in developing radiation-tolerant single-phase concentrated solid-solution alloys (SP-CSAS). The research aims to generate new knowledge on SP-CSAS' radiation tolerance and their intrinsic compositions, structures, and defects through experimental and computational...

This $600,000 National Science Foundation project grant supports research at the University of Southern California to develop new manufacturing methods for recycling post-consumer carbon fiber composite materials. The research aims to preserve the value of continuous carbon fibers and recover the polymer matrix from aircraft and other composites currently buried in landfills or subjected to pyrolysis. The project will study techniques to remanufacture recycled carbon fibers and polymer matrix...

The National Science Foundation (NSF) Engineering program (CFDA 47.041) awarded a $659,153 Project Grant to The Ohio State University to conduct research on the reuse and recycling of feedstock in the laser directed energy deposition metal additive manufacturing process. The research aims to reveal how characteristics of reused and recycled feedstock influence melting and solidification, addressing challenges in the qualification and certification of large components, such as hydropower...

This Project Grant award from the National Science Foundation (NSF) under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program provides $275,000 to Novineer, Inc. to develop novel approaches for optimizing the layout, fiber paths, and plastic infill distribution in 3D printed composite materials. The project aims to advance the state-of-the-art in additive manufacturing for end-use parts by creating automated design software that can tailor the material distribution to...