Project Grant 2501185
Award Date
11/1/24
Completion Date
4/30/28
Dollars Obligated
$647K
Federal Agency
Division of Civil, Mechanical, and Manufacturing Innovation
Federal Grant Program
47.041
Assistance Type
Project Grant
Place of Performance
Tempe, AZ 85281, USA
Similar Awards
This $562,789 Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) to Arizona State University aims to deepen the understanding of deformation mechanisms in axially bi-continuous graphene-nickel composites. The project will leverage new laser-based material processing and microdevice-based characterization methods to investigate the strengthening mechanisms of these graphene-metal composites, which can potentially lead to the development of...
This $578,437 National Science Foundation project grant supports research at Texas A&M University to develop fast manufacturing techniques for high-performance thermoplastic polymer composites. The research aims to engineer the crystallinity of these composites during fast processing to achieve high stiffness, strength and toughness concurrently. Nanomaterials consisting of cellulose nanocrystals and graphene nanoplatelets will be used to control crystallinity without hazardous solvents...
This National Science Foundation Project Grant of $348,579 supports research at Montana State University from June 2022 to May 2027 under the Engineering program (CFDA 47.041). The award will fund development of additive manufacturing techniques for sustainable thermoplastic composites incorporating biologically derived enzymes and electrically conductive fillers. Specifically, the university researcher will work to encapsulate heat-sensitive enzymes within 3D printing filaments to substantially...
This Project Grant award from the National Science Foundation (NSF) Engineering program (CFDA 47.041) to Arizona State University provides $620,013 to conduct fundamental research on additive manufacturing of novel structural batteries made with carbon fiber reinforced composites. The goal is to develop a novel coextrusion-based 3D printing process to integrate energy storage and structural load bearing functions into a single lightweight material for applications like electric transportation....
This $199,522 National Science Foundation project grant supports research at the University of Houston Clear Lake to develop additive manufacturing techniques for composite tooling. Specifically, the university will conduct fundamental research to understand fused filament fabrication of thermoplastic composite molds embedded with heating wires. This will enable energy-efficient production of thermoset composites without costly autoclave ovens. The research aims to establish a dual-extrusion...
This Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) supports research to develop a novel additive manufacturing technique that integrates photo-induced polymerization and layered cooling crystallization. The goal is to enable the precise manufacturing of rigid, bioinspired hybrid materials with enhanced functionality. The $637,665 award to San Diego State University Foundation will fund a 5-year project to investigate the processing mechanisms,...
This National Science Foundation (NSF) Division of Civil, Mechanical, and Manufacturing Innovation Project Grant award of $200,453 provides funding to Florida State University to develop a novel physics-informed deep learning framework for tailoring the multidirectional mechanical properties of composite materials. The key products or services to be delivered include: Formulating constitutive equations for composite material constituents and incorporating them into a physics-informed...
The National Science Foundation (NSF) awarded a $250,000 Project Grant to Cornell University under the Engineering CFDA program to develop fundamental research and manufacturing science for producing metal matrix composites via cold spray additive manufacturing. The 4-year project aims to advance the understanding of process-microstructure-property relationships for cold spraying metal matrix composites and leverage this knowledge for applications in aerospace, energy, and defense industries....
This $404,595 National Science Foundation (NSF) Engineering program grant, awarded to the University of Delaware on March 1, 2024, supports research to enhance multi-material additive manufacturing (3D printing) through the use of advective assembly techniques. The project aims to develop modular 3D printing nozzles capable of rapidly structuring and depositing multi-material composites at higher resolution and volumetric throughput than conventional methods. This could enable new applications...
This $600,000 National Science Foundation project grant supports research at the University of Southern California to develop new manufacturing methods for recycling post-consumer carbon fiber composite materials. The research aims to preserve the value of continuous carbon fibers and recover the polymer matrix from aircraft and other composites currently buried in landfills or subjected to pyrolysis. The project will study techniques to remanufacture recycled carbon fibers and polymer matrix...