Delivery Order SPE2DM20D1012-SPE2DM24FYFLM

The Department of the Army Materiel Command TACOM Life Cycle Management Command awarded a firm fixed price blanket purchase agreement call contract valued at three thousand eight hundred forty-two dollars and twenty-eight cents ($3,842.28) to J. Grippe's Industrial Supply Co., Inc. of Frankfort, New York. The contract calls for the delivery of twelve machine taps, two insert mills with punch sets ranging in size from one to thirteen millimeters and letters A through Z, and six end mill adapters....

This Blanket Purchase Agreement (BPA) call awarded under GSA's RC2 vehicle provides for the delivery of threaded taps conforming to ASME B94.9-2008 standards. Document Imaging Dimensions Inc. will serve as the prime contractor to supply 3mm ISO metric straight thread taps on a fixed price with economic price adjustment basis. Performance will take place in Yorkville, Illinois over an 11-day period from late July through early August 2023, with the General Services Administration as the...

F & M Micro Products Inc. has been awarded a purchase order contract valued at approximately $600 by the General Services Administration (GSA) Federal Acquisition Service to provide Grade 5 carbon steel hexagon head screws measuring 0.500 inches in diameter and 1.250 inches in length with a cadmium plated finish. The products will be manufactured and delivered from the contractor's facility in Lake Balboa, California between August and November 2023 under firm fixed pricing terms. No set...

F & M Micro Products Inc. has been awarded a purchase order contract valued at $21,870 by the General Services Administration (GSA) Federal Acquisition Service to provide Grade 5 carbon steel hexagon head screws measuring 0.375 inches in diameter and 0.5 inches in length with cadmium plating. The products will be manufactured and delivered from the contractor's facility in Lake Balboa, California between December 2023 and January 2024 under firm fixed pricing terms. No set-aside designations...

F & M Micro Products Inc. has been awarded a $74,880 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide 500 cadmium-plated carbon steel hex head screws measuring 0.500 inches in diameter and 1.250 inches in length. Performance will take place in Lake Balboa, California over a three-month period concluding in November 2023. The firm fixed price contract supports GSA procurement initiatives. No subcontractors or set-aside designations were...

F & M Micro Products Inc. has been awarded a $74,880 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide 500 each cadmium plated carbon steel hex head cap screws measuring 0.500 inches in diameter and 1.250 inches in length. Performance will take place in Lake Balboa, California over a three month period concluding in November 2023. The firm fixed price contract supports GSA's provision of standard hardware items to federal customers. No set...

F & M Micro Products Inc. has been awarded a purchase order contract valued at seventy-four thousand eight hundred eighty-eight dollars by the General Services Administration (GSA) Federal Acquisition Service to provide screw, cap items. Under the firm fixed price contract, F & M Micro Products will deliver five hundred thousand 0.500 inch diameter, 1.250 inch length Grade-5 carbon steel hexagon head screws with UNC-2A threading and cadmium plating. Place of performance will be the prime...

The Department of the Army Materiel Command TACOM Life Cycle Management Command awarded a $2,947.30 firm fixed price call against a blanket purchase agreement to J. Grippe's Industrial Supply Co., Inc. of Frankfort, New York for mill thread products under Federal Supply Classification 3455. Performance will take place in Frankfort and is required to be complete by January 10, 2023. No set-aside designation was applied to this award to supply standard industrial fasteners in support of the...

This delivery order, awarded by GSA Federal Acquisition Service, is for the procurement of key, socket head screws meeting ASME B18.3.2M-1979 specifications. The screws are to be two millimeters at both ends, have an L-handle, and a long arm length between 46 and 50 millimeters. There is no set-aside designation. Idsc Holdings LLC, doing business as Snap-On Industrial and a division of Snap-On Incorporated, will provide the screws for thirty-two dollars under its GSA Multiple Award Schedule...

F & M Micro Products Inc. has been awarded a $21,870 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide cadmium-plated carbon steel hexagon head screws measuring 0.375 inches in diameter and 0.5 inches in length. The firm fixed price order is for Grade 5 screws conforming to Unified National Coarse thread specifications. Performance will occur at the prime contractor's facility in Lake Balboa, California, between December 7, 2023 and January 6,...