Purchase Order 47QSWA23P187E
Award Date
8/22/23
Potential Completion Date
11/20/23
Potential Value
$599
Federal Agency
Federal Acquisition Service
Awardee
F & M Micro Products Inc.
Ultimate Awardee
Not listed
NAICS Category
334111 - Electronic Computer Manufacturing
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Lake Balboa, CA 91406, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
F & M Micro Products Inc. has been awarded a purchase order contract valued at $21,870 by the General Services Administration (GSA) Federal Acquisition Service to provide Grade 5 carbon steel hexagon head screws measuring 0.375 inches in diameter and 0.5 inches in length with a cadmium plated finish. The products will be manufactured and delivered from the contractor's facility in Lake Balboa, California between November 13, 2023 and December 13, 2023 under firm fixed pricing terms. No set...
F & M Micro Products Inc. has been awarded a purchase order contract valued at approximately $22,000 by the General Services Administration (GSA) Federal Acquisition Service to provide Grade 5 carbon steel hexagon head screws measuring 0.375 inches in diameter and 0.5 inches in length with cadmium plating. The screws will be delivered from the contractor's facility in Lake Balboa, California between September 15 and October 15, 2023 under firm fixed pricing. No set aside designation or...
F & M Micro Products Inc. has been awarded a purchase order contract valued at $21,870 by the General Services Administration (GSA) Federal Acquisition Service to provide Grade 5 carbon steel hexagon head screws measuring 0.375 inches in diameter and 0.5 inches in length with cadmium plating. The products will be manufactured and delivered from the contractor's facility in Lake Balboa, California between December 2023 and January 2024 under firm fixed pricing terms. No set-aside designations...
F & M Micro Products Inc. has been awarded a $75,000 purchase order contract by the General Services Administration (GSA) Federal Acquisition Service to provide Grade 5 carbon steel hex head screws. Under the terms of the firm fixed price contract, F & M Micro Products will deliver 0.5 inch diameter, 1.25 inch long cadmium plated screws from its facility in Lake Balboa, California. Performance will take place between August and November 2023. The award is expected to support GSA's...
F&M Micro Products Inc. has been awarded a purchase order contract valued at approximately $22,000 by the General Services Administration (GSA) Federal Acquisition Service to provide Grade 5 carbon steel hex head screws measuring 0.375 inches in diameter and 0.5 inches in length with a cadmium plated finish. The products will be manufactured and delivered from the contractor's facility in Lake Balboa, California between September 29 and October 29, 2023. The firm fixed price contract...
F & M Micro Products Inc. has been awarded a $21,870 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide cadmium-plated carbon steel hexagon head screws measuring 0.375 inches in diameter and 0.5 inches in length. The firm fixed price order is for Grade 5 screws conforming to Unified National Coarse thread specifications. Performance will occur at the prime contractor's facility in Lake Balboa, California, between December 7, 2023 and January 6,...
F & M Micro Products Inc. has been awarded a $74,880 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide screw, cap, 0.500 inch diameter, 1.250 inch length, grade-5 carbon steel, hexagon head, UNC-2A, cadmium plated. Performance will take place in Lake Balboa, California over a period of three months from August 22, 2023 through November 20, 2023. The firm fixed price contract was awarded under a GSA schedule for standard hardware and...
F & M Micro Products Inc. has been awarded a $75,000 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide cadmium-plated carbon steel screws. Under the terms of the firm fixed price contract, F & M Micro Products will deliver 0.5-inch diameter, 1.25-inch long Grade 5 hexagon head screws meeting Unified National Coarse 2A specifications. Place of performance will be the contractor's facility in Lake Balboa, California, with work expected to be...
F & M Micro Products Inc. has been awarded a purchase order contract valued at seventy-four thousand eight hundred eighty-eight dollars by the General Services Administration (GSA) Federal Acquisition Service to provide screw, cap items. Under the firm fixed price contract, F & M Micro Products will deliver five hundred thousand 0.500 inch diameter, 1.250 inch length Grade-5 carbon steel hexagon head screws with UNC-2A threading and cadmium plating. Place of performance will be the prime...
F & M Micro Products Inc. has been awarded a $75,000 purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide cadmium-plated carbon steel screws. Under the terms of the firm fixed price contract, F & M Micro Products will deliver 0.5-inch diameter, 1.25-inch long Grade 5 hexagon head screws meeting Unified National Coarse thread specifications from its facility in Lake Balboa, California. Performance will take place between August and November...