Roof Replacement - Slater-Marietta Gym

Work under this Contract consists of furnishing all labor, materials and equipment necessary to perform the quality remedial roof replacement at Slater-Marietta 12 Elementary School, located at 100 Baker Circle, Marietta, South Carolina 29661, as shown on Drawing Nos. G-001 through S-101. The work will include, but is not necessarily limited to, the following:Roof Replacement activities will include Roof Areas A1, B1, and B2. The work will include, but is not necessarily limited to, the following:1. Remove and properly dispose existing modified bitumen roofing system, and associated insulation down to the existing wood plank deck.a. At Roof Area A1, remove and properly dispose of the existing wood plank deck.2. Remove and properly dispose existing base flashings and cant strips.3. Remove and properly dispose the existing metal flashings, including lead flashings, scupper liners, gravel stop, fascia, coping, and counter flashings.4. Remove and properly dispose existing downspouts, and conductor heads.5. supports.6. pans.7. surface.8. surface.9. Remove and properly dispose existing gutters, gutter spacers, and gutter bracket Remove and properly dispose existing pipe flashings including lead flashing and pitch Raise existing curbs to a minimum finished flashing height of 8 inches above the new roof Extend soil vent pipes to a minimum height of 8 inches above the new roof Enlarge existing scupper openings as noted on drawings.10. Furnish and install new wood blocking at roof eaves and rake edges to match the level of the new roof.11. Furnish and install new wood blocking at parapets to maintain a minimum of 8 inches of flashing height above the new finished roof surface in accordance with FM 1-49.12. At Roof Area A1, furnish and install new tongue and groove wood plank deck (as shown on drawings), new loose laid thermal barrier, new mechanically fastened polyisocyanurate insulation, a second layer of adhered polyisocyanurate insulation, a third layer of adhered polyisocyanurate insulation, adhered coverboard, and a new 60-mil adhered TPO roof system.a. Provide manufacturers 20-year No Dollar Limit Warranty.13. At Roof Areas B1 and B2, furnish and install new loose laid thermal barrier, new mechanically fastened polyisocyanurate insulation, a second layer of adhered polyisocyanurate insulation, adhered tapered polyisocyanurate insulation, adhered coverboard, and a new 60-mil adhered TPO roof system.a. Provide manufacturers 20-year No Dollar Limit Warranty.14. Furnish and install new 60-mil TPO base flashings as specified.15. Furnish and install new metal flashings including but not limited to gravel stops, drip edge, copings, fascia metal, and counterflashing as specified.16. Furnish and install new primary scupper liners, overflow scupper liners, downspouts and conductor heads as specified.17. Furnish and install new gutters, gutter spacers, and gutter bracket supports as specified.18. Furnish and install new splash blocks at all downspouts that empty onto the roof surface or onto the ground, as specified.19. Furnish and install new pipe vaults where pitch pans or portal curbs are existing. At locations where a single penetration is present, which can be flashed with a roof system manufacturer warrantied detail, a pipe vault is not required.20. Furnish and install new walkway pads at locations shown on drawings.21. Furnish and install new snowguards at gutter eave locations. Coordinate with roof system manufacturer for inclusion in warranty.22. aspects of the work to ensure a daily watertight building envelope.23. Coordinate all Furnish and install any miscellaneous items.