Parking Lot Patching, Sealing, and Striping
Closed State & local contract opportunity Posted
- Solicitation number
- SRC0000041949
- State
- Ohio
- Responses due
Opportunity facts
- Jurisdiction
Opportunity details come from ohiobuys.ohio.gov. Updated .
About this opportunity
Hamilton County, Ohio is requesting bids on parking lot patching, sealing, and striping at 1101 Summit Road, Cincinnati, with proposals due September 30, 2026. The estimated start date is September 30, 2026, with completion by October 30, 2026.
The scope covers asphalt patching (saw-cutting and removing damaged sections to 2–4 inches, compacting sub-base, and installing hot-mix asphalt), crack sealing (cleaning cracks wider than 1/4 inch and applying hot rubberized sealant), sealcoating (two coats of commercial-grade coal tar or asphalt emulsion sealer), and line striping (re-striping parking stalls, fire lanes, ADA-accessible spaces, directional arrows, and other traffic markings). The contractor must also paint the fire curb with paint/sand mixture in front of the building. The parking lot is approximately 375 feet by 111 feet; the driveway is approximately 192 feet by 35 feet; and the fire curb is approximately 519 linear feet. Line striping must comply with ADA and local code requirements and use DOT-approved traffic paint (white, yellow, blue, or red as appropriate).
Work hours are to be determined to minimize disruption. The source does not specify a contract value, incumbent contractor, or evaluation criteria weighting.
Opportunity text
Scope of Work - Parking Lot Patching, Sealing, and Striping Project Title: Parking Lot Maintenance - Patching, Sealing, and Striping 1. Overview This scope of work outlines the services to be provided for the repair and maintenance of the parking lot located at 1101 Summit Rd, Cincinnati, OH 45237. The work includes asphalt patching, crack sealing, sealcoating, and line striping/painting. Also include painting the existing fire curb. 2. Work Description - Parking lot is Approx 375' X 111' and driveway is approx. 192'X35' a. Asphalt Patching - Identify and mark all areas of deteriorated or failed asphalt. - Saw cut and remove damaged asphalt sections to a depth of approximately [2-4 inches]. - Compact sub-base material as needed. - Install new hot-mix asphalt and compact to grade. - Clean work area thoroughly after completion. b. Crack Sealing - Clean all cracks wider than 1/4 inch using high-pressure air or wire brush. - Apply hot rubberized crack sealant into cracks to prevent water infiltration. - Remove any excess material and allow proper curing time before proceeding. c. Sealcoating - Power sweep and clean the entire asphalt surface to remove dirt, debris, and oil. - Apply [two] coats of commercial-grade coal tar or asphalt emulsion sealer using squeegee or spray application. - Allow sealcoat to cure for the recommended duration before opening to traffic. d. Line Striping and Painting - Re-stripe all existing parking stalls, fire lanes, ADA accessible spaces, directional arrows, and other traffic markings to match current layout. - Use durable, DOT-approved traffic paint (white, yellow, blue, or red as appropriate). - Layout must comply with ADA and local code requirements. - Paint Fire curb with paint/sand mixture in front of the building - Approx 519 feet 3. Timeline - Estimated Start Date: [Sept 30,2026] - Estimated Completion Date: [Oct 30, 2026] - Work can be performed during [TBD] hours to minimize disruption. 4. Site Preparation and Cleanup - All debris and materials will be removed, and site will be left clean and safe. 5. Exclusions - Concrete repairs, landscaping restoration, or sub-base reconstruction not explicitly mentioned. - Any work not specified above unless approved via written change order.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Similar opportunities
- Ask GovTribe AI about this opportunity