Parking Lot Patching, Sealing, and Striping
Closed State & local contract opportunity Posted
- Solicitation number
- SRC0000041547
- State
- Ohio
- Responses due
Opportunity facts
Opportunity details come from ohiobuys.ohio.gov. Updated .
About this opportunity
The issuing body is not identified in the source material. Based on the scope of work description alone: a parking lot maintenance project in Ohio involving asphalt patching, crack sealing, sealcoating, and line striping is solicited with proposals due September 14, 2026 and an estimated start date of September 15, 2026.
The scope covers approximately 375 feet by 111 feet of parking lot plus a 192-foot by 35-foot driveway. Work includes asphalt patching to a depth of 2–4 inches with sub-base compaction and hot-mix installation; crack sealing on cracks wider than 1/4 inch using hot rubberized sealant; two coats of commercial-grade coal tar or asphalt emulsion sealcoat; and line striping in white, yellow, blue, or red to match current layout and comply with ADA and local code requirements. The scope also includes painting the fire curb with paint/sand mixture over approximately 519 feet.
The estimated completion date is October 15, 2026. Work may be performed during daytime, nighttime, or weekend hours to minimize disruption. The source does not specify the estimated contract value, set-asides, preferences, required qualifications or certifications, evaluation criteria, pre-bid meeting or site visit details, or the current contractor.
Opportunity text
Scope of Work - Parking Lot Patching, Sealing, and Striping
Project Title: Parking Lot Maintenance - Patching, Sealing, and Striping 1. Overview This scope of work outlines the services to be provided for the repair and maintenance of the parking lot located at [insert location]. The work includes asphalt patching, crack sealing, sealcoating, and line striping/painting. Also include painting the existing fire curb. 2. Work Description - Parking lot is Approx 375' X 111' and driveway is approx. 192'X35' a. Asphalt Patching - Identify and mark all areas of deteriorated or failed asphalt. - Saw cut and remove damaged asphalt sections to a depth of approximately [2-4 inches]. - Compact sub-base material as needed. - Install new hot-mix asphalt and compact to grade. - Clean work area thoroughly after completion. b. Crack Sealing - Clean all cracks wider than 1/4 inch using high-pressure air or wire brush. - Apply hot rubberized crack sealant into cracks to prevent water infiltration. - Remove any excess material and allow proper curing time before proceeding. c. Sealcoating - Power sweep and clean the entire asphalt surface to remove dirt, debris, and oil. - Apply [two] coats of commercial-grade coal tar or asphalt emulsion sealer using squeegee or spray application. - Allow sealcoat to cure for the recommended duration before opening to traffic. d. Line Striping and Painting - Re-stripe all existing parking stalls, fire lanes, ADA accessible spaces, directional arrows, and other traffic markings to match current layout. - Use durable, DOT-approved traffic paint (white, yellow, blue, or red as appropriate). - Layout must comply with ADA and local code requirements. - Paint Fire curb with paint/sand mixture in front of the building - Approx 519 feet 3. Timeline - Estimated Start Date: [Sept 15,2026] - Estimated Completion Date: [Oct 15, 2026] - Work can be performed during [daytime/nighttime/weekend] hours to minimize disruption. 4. Site Preparation and Cleanup - All debris and materials will be removed, and site will be left clean and safe. 5. Exclusions - Concrete repairs, landscaping restoration, or sub-base reconstruction not explicitly mentioned. - Any work not specified above unless approved via written change order.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Similar opportunities
- Ask GovTribe AI about this opportunity