JPP Golf Learning Center Driving Range - Lighting Upgrade

The work covered by this Request for Quote consists of the furnishing of all labor, equipment, devices, tools, materials, transportation, professional services, supervision, drawings, permitting, and all miscellaneous requirements to perform all operations necessary to accomplish the work set forth below and shall be considered part of the Scope of Work. To perform lighting and electrical upgrades per the project requirements provided below: a. Work to be completed per the engineerings drawings and specifications provided in Exhibit 1. a. All material shall meet or exceed Florida Building Code and product submittals shall be reviewed and approved by the Owners Representative prior to ordering. b. Materials shall be delivered in their original, unopened packages, and protected from exposure to the elements. Damaged or deteriorated materials shall not be used. Contractor is to coordinate all space and security requirements with the Project Manager. A construction schedule shall be submitted for review and approval prior to pre-construction meeting, including a start date, substantial completion date, and work plan defining which openings will be scheduled on what day. The Contractor shall conduct all work so as to cause the least interference possible with the normal activities of the operations of the facility and surrounding areas. Any damage caused by Contractor (including landscaping and irrigation) shall be the responsibility of the Contractor to repair and return to its original state. Report to the Project Manager, in writing, any imperfections, unacceptable conditions and/or corrections required to be made before commencing work. Any items not identified, documented and reported to Palm Beach County (PBC) in writing, will Page 3 of 3 become part of the contractors scope. All other items identified in writing, if approved, shall result in a change order. All materials shall be installed in strict accordance with Manufacturers written instructions and recommendations. All work shall be done in conformance with applicable Federal, State and Local codes, and established standards. Contractor warrants all equipment, materials and labor furnished or performed against defects in design, materials and workmanship for a period of twelve (12) months from substantial completion. Remove all waste materials, tools and equipment from job site daily. Thoroughly clean the entire job area prior to requesting final inspection.