OTA_WISO-003_26-02_Tow Cable Take-Up/Pay-Out Reeling Machine (C)
Past New Requirement Updated
- Agency
-
Navy NAVSEA NSWC Philadelphia Division
Naval Sea Systems Command, Department of Defense
- Solicitation expected
- Estimated value
- Up to $2,000,000
- Set-aside
- No set-aside
Forecast facts
- Anticipated award
- NAICS code
- Not on record
- Place of performance
- Philadelphia, PA (NSWC)
- Forecast number
- N64498-26-RFPREQ-PD-45-0074
Forecast details come from the Navy's Long Range Acquisition Estimates. Agencies' dates and values are estimates.
About this forecast
Naval Sea Systems Command Naval Surface Warfare Center Philadelphia Division is procuring a take-up/pay-out reeling machine through Other Transaction Authority, with solicitation release estimated for 1 April 2026 and award estimated for 1 July 2026. The contractor must design, build and test a prototype, and manufacture seven additional production units of a machine that accommodates a commercial reel (20" OD x 26" wide, 28–36" flange) handling 350-pound cable within a 4' x 4' x 4' envelope, featuring variable speed capability of 50–75 feet per minute pay-off, torque range of 300–500 foot-pounds, 240V 3-phase 60Hz power, corrosion resistance, level wind functionality, and lifting provisions for both crane and forklift handling.
The estimated award value is up to $2 million on a fixed-price basis. Performance is located at 5001 S Broad Street, Philadelphia, Pennsylvania 19112. The contractor's schedule requires design review two months after award, prototype completion three months after design review, and follow-on unit delivery four months after prototype completion.
Forecast text
Statement of Need:
The TCB team requires a take-up/pay-out reeling machine to utilize the commercial reel
The team is looking for a consortium member to design this machine, build and test a prototype, and build an additional 7 production units
Requirements:
Fit a reel with the following dimensions: 20” OD x 26” wide, 28-36” flange, 350lb cable.
Fit within a roughly 4’ X 4’ X 4’ envelope
Variable speed that can meet 50-75 ft/max pay-off speed with a control system
Torque: min – 300 ft-lbs; max – 500 ft-lbs
240V 3ph 60Hz electricity
Corrosion resistant
Pick points for crane lifting as well as forklift tubes
A level wind feature to maintain evenly spaced wraps
Proposed Timeline:
Design review 2 months after award
Prototype completed 3 months after design review
Follow on units completed 4 months after prototype complete
On GovTribe
Work this forecast
- Track it in your pipeline
- Find teaming partners
- Similar forecasts
- Ask GovTribe AI about this forecast