Yellowstone Intake Replacement Weir and Fish Bypass Channel Project

Added: Jun 27, 2018 3:31 pm Federal Business Opportunities Information

Date: 2018 June 27

SOLICITATION NO. W9128F18B0006

On or about 12 July 2018, this office will issue Invitations for Bid for construction of the Fish Bypass Channel & Replacement Weir, Lower Yellowstone River Intake, MT. The solicitation will close on or about 14 August 2018.

This solicitation is UNRESTRICTED AND OPEN TO BOTH LARGE AND SMALL BUSINESS PARTICIPATION.

It is highly suggested that Contractors attend the site visit, to allow them the best opportunity to fully understand the scope of this project. Prospective bidders will be given a site visit of the construction site approximately two weeks after issuance of the Invitation for Bids. The exact date and time of the site visit will be included in the solicitation. Contractors are to meet in the parking lot adjacent to the Cenex Gas Station on Highway 16 just south of the exit off of Interstate 94, in Glendive Montana.

DO NOT submit requests for plans and specifications to the site visit personnel listed above. See ‘Obtaining Solicitation Documents' below.
_______________________________________________________________________________

Project Description: (Approx. quantities)

Construct a replacement irrigation diversion weir across the Lower Yellowstone River and fish bypass channel through Joe's Island. The weir consists of a steel W-pile section foundation with reinforced concrete crest structure capping it, and will be upstream of an existing wooden weir constructed in 1911-1912, with riprap placed between the weirs. Ninety-four W-pile sections are driven to a depth of approximately 37 feet. The weir length is approximately 700 linear feet and amount of formed reinforced concrete is approximately 500 cubic yards. The construction requires the use of sheet pile coffering and constructed in segments in order to not block the entire river.

Bypass channel will be approximately 2.2 miles long with ~75-foot bottom width, ~200-foot top width, ~18 feet average excavation depth with varying side slopes. The channel side slopes will be protected with a layer of riprap on bends, the invert and side slopes protected with cobbles processed from the excavation, and the entrance and exit and two locations within the channel protected with riprap structures. The channel excavation requires intense dewatering system to be designed by the Contractor, and earthen cofferdams at the channel entrance and exit.

Approximate quantities are as follows: ~980,000 CY of excavation, ~99,000 Tons of quarried riprap, and ~34,000 CY of cobbles for invert protection. Most of the excavation will be wasted on Joe's Island in an existing natural high-flow channel for a length of ~9000 feet.

Project will also require seeding and planting of trees and resurfacing an access road for approximately 6000 linear feet. Relocation of a historic wooden cableway tower and a building to new locations, and removal and coiling of cable that spans the river. The work scheduling will be affected by irrigation and fish passage dates.

The estimated construction cost of this project is between $40,000,000 and $50,000,000.
_______________________________________________________________________________

The Contractor will be required to commence work within 10 days after notice to proceed and complete the work 900 calendar days after receipt of Notice to Proceed. Provisions will be included for liquidated damages in case of failure to complete the work in the time allowed. Performance and payment bonds will be required. Bonding documents including the power of attorney shall bear an original signature by an officer of the surety.

Bidders (Offerors):
Please be advised of on-line registration requirement for Representations and Certifications Application (ORCA) is now located in System for Award Management (SAM) database https://www.sam.gov/portal/public/SAM/. Representations and certifications are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective until one year from date of submission or update to SAM.

Obtaining Solicitation Documents:

Solicitation documents will be posted to the web via Federal Business Opportunities (www.fbo.gov).

Find solicitation announcement in Fed Biz Opps (www.fbo.gov)

1. Use the ‘Quick Search' to locate the project (by entering the solicitation number) or use the advanced search features offered in the ‘Find Opportunities' (large arrow in the middle of the page) or use the ‘Opportunities' tab followed by the ‘Advanced Search' tab.
2. By using the ‘login' feature, it allows additional search features and allows you to keep your searches. Login might be required on some solicitations that are considered restricted.
3. Once you have located your project, click on link to solicitation to view the project. Files may be downloaded from the column on the right side reading ‘All Files' or from the ‘Packages' tab.
4. If you want other vendors, sub-contractors or contractors to contact you, click on the ‘Interested Vendors' tab and then ‘Add me to Interested Vendors' link at the bottom of the page.

Questions regarding contractual matters should be made to: Lynne Reed 402 995 2039.

Commander
U.S. Army Engineer District, Omaha
ATTENTION: CENWO-CT-C
1616 Capitol Avenue
Omaha, NE 68102 4901