Window, vehicular

NSN(s): 2510-01-535-6001

Item Description: WINDOW, VEHICULAR

Drawing Number:

I/A/W DRAWING NR 19207 12369001
REFNO DTD
AMEND NR D DTD 07 MAY 14
TYPE NUMBER:
I/A/W DRAWING NR 19207 12512206
BASIC DTD
AMEND NR DTD 07 DEC 19
TYPE NUMBER: 12512206-1
I/A/W DRAWING NR 19207 12512206-1
REFNO DTD
AMEND NR DTD 12 DEC 17
TYPE NUMBER:

Quantity (including option quantity): 1,115

Unit of Issue: EA

Destination Information: FOB

Delivery Schedule: 120 days ARO

All responsible sources may submit an offer/quote which shall be considered.

The solicitation will be available in FedBizOpps on its issue date of May 29, 2013

The Small Business size standard is 1,000 employees.

Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.

TYPE OF SET-ASIDE: 100% Small Business Set Aside

PURCHASE ORDER TEXT:

CRITICAL APPLICATION ITEM

WINDOW,VEHICULAR

IMPORTANT NOTE: THIS ITEM REQUIRES CONTRACTOR FIRST ARTICLE TESTING (2 FULL ASSEMBLIES) AND BALLISTIC COUPON TESTING AS INSTRUCTED PER DRAWING 12512006 AND ATPD 2352. THE TEST RESULTS MUST BE AVAILABLE FOR REVIEW BY A GOVERNMENT REPRESENTATIVE BEFORE
ACCEPTANCE. EXCEPTION TO ATPD2352, PARAGRAPH 4.1.3: BALLISTIC CONTROL ACCEPTANCE TESTS SHALL OCCUR EVERY TWELVE (12) MONTHS AFTER PRODUCTION COMMENCES OR 2000 PRODUCTION PARTS, WHICHEVER OCCURS FIRST... IN LIEU OF THREE MONTHS.  NOTE: ALL SUPPLIERS MUST MEET ATPD 2352, "4.1.3 PRODUCTION CONTROL TEST" REQUIREMENTS WHICH APPLIES TO THE MATERIAL PRODUCTION LOT. THIS APPLIES WHETHER FIRST ARTICLE IS REQUIRED OR NOT. EXCEPTION TO DRAWING 12512206, NOTE 7;
FINISH IAW DRAWING 12369001 IN LIEU OF 12369003, TOPCOAT COLOR SHALL BE 686 TAN.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA
AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS
PURSUANT TO INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY
CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATILE CREEK, MI 49017-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE
AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL
DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN
APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE
TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25."

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.  SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (GOVERNMENT SPECIFICATION) (APR 1984) - FAR 52.246-11
.
(A) DEFINITION. "CONTRACT DATE," AS USED IN THIS CLAUSE, MEANS THE DATE SET FOR BID OPENING OR, IF THIS IS A NEGOTIATED CONTRACT OR A
MODIFICATION, THE EFFECTIVE DATE OF THIS CONTRACT OR MODIFICATION.
.
(B) THE CONTRACTOR SHALL IN EFFECT ON THE CONTRACT DATE, COMPLY WITH THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9001
STANDARD.

"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM SHALL BE AT THE ACTUAL MANUFACTURING FACILITY. TECHNICAL INSPECTION IS REQUIRED. THE
CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT THE ITEM MEETS ALL TECHNICAL REQUIREMENTS.
COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984,
DCSC 52.217-9C01). FINAL INSPECTION OF PACKAGING, IF REQUIRED, MAY BE CONDUCTED ELSEWHERE."

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE
APPLICABLE QPL(S)/QML(S).

DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY.

PACKAGING DATA:

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 00:
WRAP MAT = 00: CUSH/DUNN MAT = GF: CUSH/DUNN THKNESS = R:
UNIT CONT = FO: OPI = M:  PACK CODE = U:
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE: 36 -
PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B
DATED 08183