USCG WTGB Vessels Propulsion Controller Modification

The U.S. Coast Guard is looking for sources which would be interested in performing the work noted in the Draft Statement of Work (SOW) that is attached to this posting.   

Capable to modify, replace, repair, or maintain the existing ship propulsion monitor and control system for nine 140’ WTGB class cutters. The main objective is to provide services which ensure the control system meets the desired operating parameters detailed in this document. These services include conducting appraisals, inspections, reports, repairs, and tests on a recurring basis throughout the contract period and any option years exercised under the contract.  Required services will include shipboard performance, onsite service(s) during sea trials and in-shop engineering support to include software.  The service representative(s) and engineer(s) will be required to provide all parts and perform all labor to complete appraisals, inspections, reports, repairs, design modifications, and tests. Control system algorithms and settings shall be programmed to resolve existing deficiencies noted in this specification. If replacement of existing equipment is deemed necessary, the Contractor shall use Commercial Off The Shelf (COTS) equipment and shall not use proprietary software or hardware.