Tube Facing and Squaring Tool
Award Notice Posted
- Solicitation number
- N68335-15-R-0108
- Agency
-
Naval Air Warfare Center
Naval Air Systems Command, Department of Defense
- Awarded
- to Tessec LLC
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- N6833516D0005 Federal IDV award
- NAICS code
- 333515 Cutting Tool and Machine Tool Accessory Manufacturing
- PSC
- Not on record
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
The Naval Air Warfare Center Aircraft Division Lakehurst, NJ, under the authority of 10 USC 2304 (c) (1), FAR 6.302-1, intends to procure a maximum of twenty-seven (27) Tube Facing and Squaring Tools, Model 302E USMC from Tri Tool, Inc. Tri Tool is the only source that is able to supply a Tube Facing and Squaring Tool that is suitable for use in the V-22 Aircraft.
This tool will face/ square 0.188" to 1.0" outside diameter tubing with a wall thickness of up to 0.2". This tube squaring tool must use an OD Saddle Clamping System for holding and rounding the tube. The tool must accept its own torque through the Saddle Clamping System. The standard Saddle Clamping System requires a straight length of tube 0.875" long. Automatic clamping can be provided using a pneumatic clamping system. Speed control must be provided with a variable speed electric drive or pneumatic drive motor. Feed is to be provided by a lever action with a microfeed system providing an accurate controlled feed of 0.001". This tube squaring tool must be able to shave/ resize a V-22 Titanium Tube after the tube has been bent. The trimming must be able to be done in close proximity (0.875 inch) to the last bend.
The Tube Squaring Tool must include:
• 110V Motor Assembly
• Wrench
• Carrying Case
• Operators Manual
This is not a request for competitive proposals. A determination by the Government not to open the requirement to competition based upon responses to this notice, is solely within the discretion of the Government. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. The point of contact is Michael T. Miller - michael.t.miller7@navy.mil.
.
Update #1 ·
The Naval Air Warfare Center Aircraft Division Lakehurst, NJ, under the authority of 10 USC 2304 (c) (1), FAR 6.302-1, intends to procure a maximum of twenty-seven (27) Tube Facing and Squaring Tools, Model 302E USMC from Tri Tool, Inc. Tri Tool is the only source that is able to supply a Tube Facing and Squaring Tool that is suitable for use in the V-22 Aircraft.
This tool will face/ square 0.188" to 1.0" outside diameter tubing with a wall thickness of up to 0.2". This tube squaring tool must use an OD Saddle Clamping System for holding and rounding the tube. The tool must accept its own torque through the Saddle Clamping System. The standard Saddle Clamping System requires a straight length of tube 0.875" long. Automatic clamping can be provided using a pneumatic clamping system. Speed control must be provided with a variable speed electric drive or pneumatic drive motor. Feed is to be provided by a lever action with a microfeed system providing an accurate controlled feed of 0.001". This tube squaring tool must be able to shave/ resize a V-22 Titanium Tube after the tube has been bent. The trimming must be able to be done in close proximity (0.875 inch) to the last bend.
The Tube Squaring Tool must include:
• 110V Motor Assembly
• Wrench
• Carrying Case
• Operators Manual
This is not a request for competitive proposals. A determination by the Government not to open the requirement to competition based upon responses to this notice, is solely within the discretion of the Government. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. The point of contact is Michael T. Miller - michael.t.miller7@navy.mil.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity