Steel fixture kit

STEEL, FIXTURE KIT
Minimum Specifications for Metrology Fixture Kit

1. One (1) Base Plate with the following characteristics:
a. Must be aluminum
b. Must have the following dimensions to be compatible with the shelf it will reside: 24-inch x 24-inch x 0.50-inch
c. Must have a Square hole pattern with 0.50-inch center to center distance d. Must have a -20 threads thread pattern
2. One (1) fixture clamping kit consisting of:
a. One (1) Organizing tray
b. - 20 Threaded stands of varying sizes
i. Six (6) 1-inch Diameter by 1-inch height ii. Six (6) 1-inch Diameter by 2-inch height
iii. Four (4) 1-inch Diameter by 4-inch height iv. Six (6) 1-inch Diameter by 3/4-inch height
v. Three (3) 3/8-inch Diameter by 1/2-inch height
vi. Six (6) 1/2-inch Diameter by 1-inch height
vii. Six (6) 1/2-inch Diameter by 1-inch height viii. Six (6) 1/2-inch Diameter by 2-inch height
ix. Six (6) 1/2-inch Diameter by 3/4-inch height x. Six (6) 3/4-inch Diameter by 1-inch height xi. Six (6) 3/4-inch Diameter by 2-inch height
xii. Six (6) 3/4-inch Diameter by 3-inch height
xiii. Six (6) 3/4-inch Diameter by 1/2-inch height xiv. Six (6) 3/4-inch Diameter by 3/4-inch height
c. - 20 Threaded jackstands of varying sizes
i. Two (2) 1-inch Diameter large jackstand
ii. Two (2) 1/2-inch Diameter small jackstand
d. Tension springs with - 20 threaded posts of varying sizes
i. Eight (8) Large tension spring 3-inch post with -20 threads ii. Six (6) Small tension spring (short post) -20 thread
e. - 20 Threaded slide base of varying sizes
i. Two (2) -20 Threaded mini slide base (1-inch long)
ii. Two (2) -20 Threaded slide base
f. Four (4)1/2-inch Diameter by 1-inch height x 1/8-inch Pin standoff g. Two (2) Locating blocks with base
h. Four (4) Nylon cones i. Four (4) Steel cones
j. Four (4) Steel resting pin
3. All components must be machined with for use with metrology or coordinate measuring machine devices and be contained in a single kit.