Space and Naval Warfare Systems Center, Production Fabrication Support Services

6/1/2017 Amendment 0003 Issued



-Post Questions and Answers (1-7).



-Add and upload Attachment 4: Wage Determination No. 2015-5635, Revision 4

dated

03/17/2017.



-Change the Evaluation Factors for Award criteria for "Factor I. Required

Personnel

Experience" by reducing the number of years of experience required to be

considered "Acceptable". The years required are now as follows:



5 years of experience relevant to the SOW for the proposed Sr. Machinist;

3 years of experience relevant to the SOW for the proposed Journeyman

Machinist; and

5 years of experience relevant to the SOW for the proposed Sr. Sheet Metal

Mechanic.



-Remove clause FAR 52.222-53, Exemption from Application of the Service

Contract

Labor Standards to

Contracts for Certain ServicesRequirements, from this solicitation as it is

NOT

applicable.



-Incorporate the following clauses by reference:

FAR 52.222-41, Service Contract Labor Standards;

FAR 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards

-- Price

Adjustment (Multiple Year and Option Contracts)

FAR 52,222-55, Minimum Wages Under Executive Order 13658



-Incorporate the following clause by full text:

FAR 52.222-42, Statement of Equivalent Rates for Federal Hires



In compliance with the Service Contract Labor Standards statute and the

regulations of

the Secretary of Labor (29 CFR part 4), this clause identifies the classes of

service

employees expected to be employed under the contract and states the wages and

fringe

benefits payable to each if they were employed by the contracting agency

subject to the

provisions of 5 U.S.C. 5341 or 5332.



This Statement is for Information Only:

It is not a Wage Determination



Employee Class Monetary Wage -- Fringe Benefits

Machine-Tool Operator (Tool Room) $21.93

Tool And Die Maker $25.80



(End of Clause)





The submission closing date remains unchanged: 12 June 2017 at 11:00 AM,

Pacific Time.







********************************************************



5/31/2017

Amendment 0002 Issued



Change the submission closing date from 31 May 2017 at 11:00 AM, Pacific Time

to 12

June 2017 at 11:00 AM, Pacific Time.





********************************************************



5/22/2017

Amendment 0001 Issued -



Amendment 0001 Issued



Post an answer to the question received.

o Question: Is there an incumbent contractor currently providing these services

to SSC

Pacific?

o Answer: There is no incumbent contractor currently providing these services

to SSC

Pacific. This is a new requirement.



The submission closing date remains unchanged: 31 May 2017 at 11:00 AM, Pacific

Time





********************************************************

5/11/2017

Solicitation Issued -



This requirement is to provide on-site support of Space and Naval Warfare

Systems

Center Pacific's (SSC Pacific's) Machine Shop for Code 52280, ISR EM Systems

Technology Competency. The contractor shall provide tooling, jig and fixture,

prototype,

and production parts fabrication services. The fabrication services are for

items

machined from Government generated technical drawings. The items to be

produced are

varied and undefined, but the function of the contractor is to produce items

within the

tolerances specified in the technical drawings and specifications.



This is a SSC Pacific combined synopsis/solicitation for commercial items

prepared in

accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of

Commercial

Items, and FAR Part 13, Simplified Acquisition Procedures.



This announcement constitutes the only solicitation. Competitive offers are

being

requested under (RFQ) # N66001-17-R-0144. The applicable North American

Industry

Classification System (NAICS) code is 541330, Engineering Services, with a size

standard

of $38.5 Million dollars. This is a Total Small Business Set-Aside. Any offer

that is

submitted by an offeror that is not a Small Business Concern will not be

considered for

award.



To be considered acceptable and eligible for award, Offers must provide all of

the items

and quantities listed below. The Government will not consider offers for

partial items or

quantities. Anticipated Contract Line Items are provided in Attachment 3,

Price Volume.

The Government anticipates this effort to be a Firm Fixed Price Level-of-Effort

(FFP-LOE)

type single award contract for a 12-month base period with four 12-month

options.



Offer Instructions:

The Government may consider offers that fail to follow instructions to be

unacceptable

and ineligible for award. In order to compete for the contract described in

this

synopsis/solicitation, follow the instructions outlined below (i.e. items 1

through 8).

Incomplete submissions may not be considered. Offers shall:

1. Include a separate Technical Volume (pages numbered) in PDF format that

excludes prices and pricing information;

2. Include a separate Price Volume (in Ms Excel format) that includes pricing

for each Contract Line Item Number (CLIN) in US Dollars ($).

3. Provide the Offeror name, address, Data Universal Numbering System

(DUNS) number, Contractor and Cage Entity (CAGE) code, business size and type

of

small business, Tax Identification Number (TIN), and telephone and e-mail

address of an

Offeror point of contact. Include teaming arrangement details (if applicable).

4. Complete all Fill-In Clauses: Provide all representations, certifications

and

fill-ins required by the solicitation for inclusion in any resulting contract.

Vendors must

be registered in the System for Award Management (SAM) to be eligible for

award; Offers

received without the completed copy of the provision at FAR 52.212-3 ALT I or

completed

SAM representation may be considered non-compliant.

5. Terms and Conditions: Offerors must include a statement that it either (a)

agrees to the terms and conditions of this solicitation (which consists of the

entire RFQ,

including all documents, exhibits, and other attachments that are incorporated

therein by

reference and made a part thereof) and any solicitation amendments; or (b)

takes

exceptions to any terms or conditions of the solicitation, and clearly

identifies those

exceptions. Exceptions to any of the terms and conditions of this RFQ may be

considered

by the Government to be unacceptable.

6. Specify quote validity period of no less than 180 days.

7. Stay within the page limitations indicated below for each Volume; and

8. All text shall be formatted on an 8 by 11 inch page in 12 point Times New

Roman font.



The Technical Volume shall address Factor I as follows:

Factor I. Required Personnel Experience

Offerors shall include resumes (not to exceed 2 pages per resume) for each of

the

individuals proposed in the following labor categories:

Sr. Machinist

Journeyman Machinist

Sr. Sheet Metal Mechanic



The Price Volume shall address Factors II as follows:

Factor II. Price

Offerors shall provide an hourly Unit Price and an Extended Price for each

Contract Line

Item Number (CLIN) and a total Firm-Fixed-Price for all line items provided in

Attachment 3, Price Volume. Offerors must ensure all blanks are completed and

mathematical calculations are accurate for all CLIN(s) 0001-4005.





Evaluation Factors for Award:

The Government will award a contract resulting from this solicitation to the

responsible

offeror whose offer conforming to the solicitation will be most advantageous to

the

Government, price and other factors considered. The Government anticipates

awarding a

FFP-LOE contract.



Factor I. Required Personnel Experience

Offerors will be considered "Acceptable" if the submitted resumes demonstrate:

6 years of experience relevant to the SOW for the proposed Sr. Machinist;

4 years of experience relevant to the SOW for the proposed Journeyman

Machinist; and

6 years of experience relevant to the SOW for the proposed Sr. Sheet Metal

Mechanic.



Note: Any offeror rated as "Unacceptable" under Factor I may be determined to

be

ineligible for contract award.



Factor II. Price

The offer will be evaluated based on the total firm-fixed-price. The Government

will

evaluate the total price to determine if it is fair and reasonable.



Basis For Award:

This procurement will use the Lowest Price Technically Acceptable (LPTA) source

selection

methodology.





Questions

Questions regarding this solicitation are to be submitted to SSC Pacific code

22710 via e

mail to David Roden (david.roden@navy.mil) or the ECommerce Central Question

Feature. Please use reference No. N6600117R0144. All questions regarding

this

solicitation must be received before 22 May 2017 at 11:00 AM, Pacific Time.



Proposal Submission

This solicitation closes on 31 May 2017 at 11:00 AM, Pacific Time. Offers must

be

uploaded on the SPAWAR e-Commerce website at https://e-

commerce.sscno.nmci.navy.mil, under SSC Pacific/Simplified

Acquisitions/N66001-17-R-

0144. E-mail offers will not be accepted. DO NOT email offers. Submissions

received

after the solicitation close date and time will not be accepted by the

Government.



For e-Commerce technical issues, please contact the SPAWAR Paperless

Initiatives Help

Desk at 858-537-0644 or paperless.spawar@navy.mil and e-mail the points of

contact

below before the close date and time of the solicitation.



The points of contact for this solicitation are David Roden at

david.roden@navy.mil and

Jacob Ward at jacob.ward@navy.mil. Please include RFQ# N66001-17-R-00144 on

all

inquiries. Questions may be addressed afterward at the discretion of the

Government.

No telephone questions will be entertained.



All responding vendors must have a completed registration in the System for

Award

Management (SAM) website prior to award of contract. Information can be found

at

https://www.sam.gov/. Complete SAM registration means a registered DUNS and

CAGE

Code.



Combined Synopsis/Solicitation Attachments are as follows:

Attachment 1: Performance Work Statement (PWS)

Attachment 2: Contract Data Requirements List (CDRL)

Attachment 3: Price Volume





This solicitation document incorporates standard commercial provisions and

clauses for

requirements in effect through Federal Acquisition Circular (FAC) 2005-95 and

Defense

Federal Acquisition Regulation Supplement (DFARS) Publication Notice 20161222.

Additional contract clauses may apply in the Terms and Conditions of the award

and

contractually binding at the time of award. It is the responsibility of the

offeror to be

familiar with the applicable clauses and provisions. In accordance with

52.252-1,

Solicitation Provisions Incorporated by Reference, and 52.252-2, Clauses

Incorporated by

Reference, all provisions and clauses can be accessed in full text at

www.farsite.hill.af.mil

or https://acquistion.gov/far/.



The following FAR and DFARS provisions, incorporated by reference, apply to

this

solicitation:

52.204-16, Commercial and Government Entity Code Reporting;

52.209-7, Information Regarding Responsibility Matters;

52.212-1, Instructions to Offerors -- Commercial Items (Tailored information

provided

above);

52.212-2, Evaluation -- Commercial Items (Tailored information provided above);

52.212-3 and Alt I, Offeror Representations and CertificationsCommercial Items;

52.217-5, Evaluation of Options;

252.203-7005, Representation Relating to Compensation of Former DoD Officials;

252.204-7008, Compliance with Safeguarding Covered Defense Information Controls;

252.204-7011, Alternative Line Item Structure;

252.215-7007, Notice of Intent to Resolicit;

252.215-7008, Only One Offer;

252.222-7007, Representation Regarding Combating Trafficking in Persons;

252.225-7031, Secondary Arab Boycott of Israel;

252.225-7050, Disclosure of Ownership or Control by the Government of a Country

that

is a State Sponsor of Terrorism

252.203-7994 (DEVIATION 2017-O0001), Prohibition on Contracting with Entities

that

Require Certain Internal Confidentiality AgreementsRepresentation (DEVIATION

2017-

O0001)





FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement

Statutes or

Executive Orders -- Commercial Items, applies to this solicitation and includes:

52.203-6 and Alt I, Restrictions on Subcontractor Sales to the Government;

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards;

52.209-6, Protecting the Government's Interest When Subcontracting with

Contractors

Debarred, Suspended, or Proposed for Debarment. (Dec 2010);

52.209-9, Updates of Publicly Available Information Regarding Responsibility

Matters;

52.219-6, Notice of Total Small Business Set-Aside;

52.219-8, Utilization of Small Business Concerns;

52.219-13, Notice of Set-Aside of Orders;

52.219-14, Limitations on Subcontracting;

52.219-28, Post-Award Small Business Program Representation;

52.222-3, Convict Labor (E.O. 11755);

52.222-21, Prohibition of Segregated Facilities (Feb 1999);

52.222-26, Equal Opportunity (E.O. 11246);

52.222-35, Equal Opportunity for Veterans;

52.222-36, Equal Opportunity for Workers with Disabilities;

52.222-37, Employment Reports on Veterans;

52.222-40, Notification of Employee Rights Under the National Labor Relations

Act;

52.222-50, Combating Trafficking in Persons;

52.222-53, Exemption from Application of the Service Contract Labor Standards

to

Contracts for Certain ServicesRequirements;

52.222-54, Employment Eligibility Verification

52.222-60, Paycheck Transparency (Executive Order 13673)

52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving;

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations,

and

statutes administered by the Office of Foreign Assets Control of the Department

of the

Treasury);

52.232-33, Payment by Electronic Funds TransferSystem for Award Management.





The following additional FAR and DFARS clauses, incorporated by reference,

apply to this

solicitation:

52.203-3, Gratuities;

52.204-18, Commercial and Government Entity Code Maintenance;

52.204-21, Basic Safeguarding of Covered Contractor Information Systems;

52.212-4, Contract Terms and Conditions -- Commercial Items;

52.217-9, Option to Extend Services;

52.232-40, Providing Accelerated Payments to Small Business Subcontractors;

252.203-7000, Requirements Relating to Compensation of Former DoD Officials;

252.203-7995 (DEVIATION 2017-O0001), Prohibition on Contracting with Entities

that

Require Certain Internal Confidentiality Agreements (DEVIATION 2017-O0001)

252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor

Reported

Cyber Incident Information;

252.204-7012, Safeguarding of Unclassified Controlled Technical Information;

252.204-7015, Disclosure of Information to Litigation Support Contractors;

252.225-7012, Preference for Certain Domestic Commodities;

252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic

Enterprises,

and Native Hawaiian Small Business Concerns;

252.227-7015, Technical DataCommercial Items;

252.227-7037, Validation of Restrictive Markings on Technical Data;

252.232-7003, Electronic Submission of Payment Requests and Receiving Reports;

252.232-7006, Wide Area Work Flow Payment Instructions;

252.232-7010, Levies on Contract Payments;

252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel;

252.243-7002, Requests for Equitable Adjustment;

252.244-7000, Subcontracts for Commercial Items;

252.246-7003, Notification of Potential Safety Issues;

252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military;

5252.201-9201, Designation of Contracting Officer's Representative;

5252.204-9202, Contractor Badge;

5252.209-9206, Employment of Navy Personnel Restricted;

5252.216-9210, Type of Contract;

5252.237-9602, Contractor Identification; and

5252.243-9600, Authorized Changes only by the Contracting Officer.

5/31/2017 Amendment 0002 Issued



Change the submission closing date from 31 May 2017 at 11:00 AM, Pacific Time

to 12

June 2017 at 11:00 AM, Pacific Time.





********************************************************



5/22/2017

Amendment 0001 Issued -



Amendment 0001 Issued



Post an answer to the question received.

o Question: Is there an incumbent contractor currently providing these services

to SSC

Pacific?

o Answer: There is no incumbent contractor currently providing these services

to SSC

Pacific. This is a new requirement.



The submission closing date remains unchanged: 31 May 2017 at 11:00 AM, Pacific

Time





********************************************************

5/11/2017

Solicitation Issued -



This requirement is to provide on-site support of Space and Naval Warfare

Systems

Center Pacific's (SSC Pacific's) Machine Shop for Code 52280, ISR EM Systems

Technology Competency. The contractor shall provide tooling, jig and fixture,

prototype,

and production parts fabrication services. The fabrication services are for

items

machined from Government generated technical drawings. The items to be

produced are

varied and undefined, but the function of the contractor is to produce items

within the

tolerances specified in the technical drawings and specifications.



This is a SSC Pacific combined synopsis/solicitation for commercial items

prepared in

accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of

Commercial

Items, and FAR Part 13, Simplified Acquisition Procedures.



This announcement constitutes the only solicitation. Competitive offers are

being

requested under (RFQ) # N66001-17-R-0144. The applicable North American

Industry

Classification System (NAICS) code is 541330, Engineering Services, with a size

standard

of $38.5 Million dollars. This is a Total Small Business Set-Aside. Any offer

that is

submitted by an offeror that is not a Small Business Concern will not be

considered for

award.



To be considered acceptable and eligible for award, Offers must provide all of

the items

and quantities listed below. The Government will not consider offers for

partial items or

quantities. Anticipated Contract Line Items are provided in Attachment 3,

Price Volume.

The Government anticipates this effort to be a Firm Fixed Price Level-of-Effort

(FFP-LOE)

type single award contract for a 12-month base period with four 12-month

options.



Offer Instructions:

The Government may consider offers that fail to follow instructions to be

unacceptable

and ineligible for award. In order to compete for the contract described in

this

synopsis/solicitation, follow the instructions outlined below (i.e. items 1

through 8).

Incomplete submissions may not be considered. Offers shall:

1. Include a separate Technical Volume (pages numbered) in PDF format that

excludes prices and pricing information;

2. Include a separate Price Volume (in Ms Excel format) that includes pricing

for each Contract Line Item Number (CLIN) in US Dollars ($).

3. Provide the Offeror name, address, Data Universal Numbering System

(DUNS) number, Contractor and Cage Entity (CAGE) code, business size and type

of

small business, Tax Identification Number (TIN), and telephone and e-mail

address of an

Offeror point of contact. Include teaming arrangement details (if applicable).

4. Complete all Fill-In Clauses: Provide all representations, certifications

and

fill-ins required by the solicitation for inclusion in any resulting contract.

Vendors must

be registered in the System for Award Management (SAM) to be eligible for

award; Offers

received without the completed copy of the provision at FAR 52.212-3 ALT I or

completed

SAM representation may be considered non-compliant.

5. Terms and Conditions: Offerors must include a statement that it either (a)

agrees to the terms and conditions of this solicitation (which consists of the

entire RFQ,

including all documents, exhibits, and other attachments that are incorporated

therein by

reference and made a part thereof) and any solicitation amendments; or (b)

takes

exceptions to any terms or conditions of the solicitation, and clearly

identifies those

exceptions. Exceptions to any of the terms and conditions of this RFQ may be

considered

by the Government to be unacceptable.

6. Specify quote validity period of no less than 180 days.

7. Stay within the page limitations indicated below for each Volume; and

8. All text shall be formatted on an 8 by 11 inch page in 12 point Times New

Roman font.



The Technical Volume shall address Factor I as follows:

Factor I. Required Personnel Experience

Offerors shall include resumes (not to exceed 2 pages per resume) for each of

the

individuals proposed in the following labor categories:

Sr. Machinist

Journeyman Machinist

Sr. Sheet Metal Mechanic



The Price Volume shall address Factors II as follows:

Factor II. Price

Offerors shall provide an hourly Unit Price and an Extended Price for each

Contract Line

Item Number (CLIN) and a total Firm-Fixed-Price for all line items provided in

Attachment 3, Price Volume. Offerors must ensure all blanks are completed and

mathematical calculations are accurate for all CLIN(s) 0001-4005.





Evaluation Factors for Award:

The Government will award a contract resulting from this solicitation to the

responsible

offeror whose offer conforming to the solicitation will be most advantageous to

the

Government, price and other factors considered. The Government anticipates

awarding a

FFP-LOE contract.



Factor I. Required Personnel Experience

Offerors will be considered "Acceptable" if the submitted resumes demonstrate:

6 years of experience relevant to the SOW for the proposed Sr. Machinist;

4 years of experience relevant to the SOW for the proposed Journeyman

Machinist; and

6 years of experience relevant to the SOW for the proposed Sr. Sheet Metal

Mechanic.



Note: Any offeror rated as "Unacceptable" under Factor I may be determined to

be

ineligible for contract award.



Factor II. Price

The offer will be evaluated based on the total firm-fixed-price. The Government

will

evaluate the total price to determine if it is fair and reasonable.



Basis For Award:

This procurement will use the Lowest Price Technically Acceptable (LPTA) source

selection

methodology.





Questions

Questions regarding this solicitation are to be submitted to SSC Pacific code

22710 via e

mail to David Roden (david.roden@navy.mil) or the ECommerce Central Question

Feature. Please use reference No. N6600117R0144. All questions regarding

this

solicitation must be received before 22 May 2017 at 11:00 AM, Pacific Time.



Proposal Submission

This solicitation closes on 31 May 2017 at 11:00 AM, Pacific Time. Offers must

be

uploaded on the SPAWAR e-Commerce website at https://e-

commerce.sscno.nmci.navy.mil, under SSC Pacific/Simplified

Acquisitions/N66001-17-R-

0144. E-mail offers will not be accepted. DO NOT email offers. Submissions

received

after the solicitation close date and time will not be accepted by the

Government.



For e-Commerce technical issues, please contact the SPAWAR Paperless

Initiatives Help

Desk at 858-537-0644 or paperless.spawar@navy.mil and e-mail the points of

contact

below before the close date and time of the solicitation.



The points of contact for this solicitation are David Roden at

david.roden@navy.mil and

Jacob Ward at jacob.ward@navy.mil. Please include RFQ# N66001-17-R-00144 on

all

inquiries. Questions may be addressed afterward at the discretion of the

Government.

No telephone questions will be entertained.



All responding vendors must have a completed registration in the System for

Award

Management (SAM) website prior to award of contract. Information can be found

at

https://www.sam.gov/. Complete SAM registration means a registered DUNS and

CAGE

Code.



Combined Synopsis/Solicitation Attachments are as follows:

Attachment 1: Performance Work Statement (PWS)

Attachment 2: Contract Data Requirements List (CDRL)

Attachment 3: Price Volume





This solicitation document incorporates standard commercial provisions and

clauses for

requirements in effect through Federal Acquisition Circular (FAC) 2005-95 and

Defense

Federal Acquisition Regulation Supplement (DFARS) Publication Notice 20161222.

Additional contract clauses may apply in the Terms and Conditions of the award

and

contractually binding at the time of award. It is the responsibility of the

offeror to be

familiar with the applicable clauses and provisions. In accordance with

52.252-1,

Solicitation Provisions Incorporated by Reference, and 52.252-2, Clauses

Incorporated by

Reference, all provisions and clauses can be accessed in full text at

www.farsite.hill.af.mil

or https://acquistion.gov/far/.



The following FAR and DFARS provisions, incorporated by reference, apply to

this

solicitation:

52.204-16, Commercial and Government Entity Code Reporting;

52.209-7, Information Regarding Responsibility Matters;

52.212-1, Instructions to Offerors -- Commercial Items (Tailored information

provided

above);

52.212-2, Evaluation -- Commercial Items (Tailored information provided above);

52.212-3 and Alt I, Offeror Representations and CertificationsCommercial Items;

52.217-5, Evaluation of Options;

252.203-7005, Representation Relating to Compensation of Former DoD Officials;

252.204-7008, Compliance with Safeguarding Covered Defense Information Controls;

252.204-7011, Alternative Line Item Structure;

252.215-7007, Notice of Intent to Resolicit;

252.215-7008, Only One Offer;

252.222-7007, Representation Regarding Combating Trafficking in Persons;

252.225-7031, Secondary Arab Boycott of Israel;

252.225-7050, Disclosure of Ownership or Control by the Government of a Country

that

is a State Sponsor of Terrorism

252.203-7994 (DEVIATION 2017-O0001), Prohibition on Contracting with Entities

that

Require Certain Internal Confidentiality AgreementsRepresentation (DEVIATION

2017-

O0001)





FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement

Statutes or

Executive Orders -- Commercial Items, applies to this solicitation and includes:

52.203-6 and Alt I, Restrictions on Subcontractor Sales to the Government;

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards;

52.209-6, Protecting the Government's Interest When Subcontracting with

Contractors

Debarred, Suspended, or Proposed for Debarment. (Dec 2010);

52.209-9, Updates of Publicly Available Information Regarding Responsibility

Matters;

52.219-6, Notice of Total Small Business Set-Aside;

52.219-8, Utilization of Small Business Concerns;

52.219-13, Notice of Set-Aside of Orders;

52.219-14, Limitations on Subcontracting;

52.219-28, Post-Award Small Business Program Representation;

52.222-3, Convict Labor (E.O. 11755);

52.222-21, Prohibition of Segregated Facilities (Feb 1999);

52.222-26, Equal Opportunity (E.O. 11246);

52.222-35, Equal Opportunity for Veterans;

52.222-36, Equal Opportunity for Workers with Disabilities;

52.222-37, Employment Reports on Veterans;

52.222-40, Notification of Employee Rights Under the National Labor Relations

Act;

52.222-50, Combating Trafficking in Persons;

52.222-53, Exemption from Application of the Service Contract Labor Standards

to

Contracts for Certain ServicesRequirements;

52.222-54, Employment Eligibility Verification

52.222-60, Paycheck Transparency (Executive Order 13673)

52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving;

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations,

and

statutes administered by the Office of Foreign Assets Control of the Department

of the

Treasury);

52.232-33, Payment by Electronic Funds TransferSystem for Award Management.





The following additional FAR and DFARS clauses, incorporated by reference,

apply to this

solicitation:

52.203-3, Gratuities;

52.204-18, Commercial and Government Entity Code Maintenance;

52.204-21, Basic Safeguarding of Covered Contractor Information Systems;

52.212-4, Contract Terms and Conditions -- Commercial Items;

52.217-9, Option to Extend Services;

52.232-40, Providing Accelerated Payments to Small Business Subcontractors;

252.203-7000, Requirements Relating to Compensation of Former DoD Officials;

252.203-7995 (DEVIATION 2017-O0001), Prohibition on Contracting with Entities

that

Require Certain Internal Confidentiality Agreements (DEVIATION 2017-O0001)

252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor

Reported

Cyber Incident Information;

252.204-7012, Safeguarding of Unclassified Controlled Technical Information;

252.204-7015, Disclosure of Information to Litigation Support Contractors;

252.225-7012, Preference for Certain Domestic Commodities;

252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic

Enterprises,

and Native Hawaiian Small Business Concerns;

252.227-7015, Technical DataCommercial Items;

252.227-7037, Validation of Restrictive Markings on Technical Data;

252.232-7003, Electronic Submission of Payment Requests and Receiving Reports;

252.232-7006, Wide Area Work Flow Payment Instructions;

252.232-7010, Levies on Contract Payments;

252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel;

252.243-7002, Requests for Equitable Adjustment;

252.244-7000, Subcontracts for Commercial Items;

252.246-7003, Notification of Potential Safety Issues;

252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military;

5252.201-9201, Designation of Contracting Officer's Representative;

5252.204-9202, Contractor Badge;

5252.209-9206, Employment of Navy Personnel Restricted;

5252.216-9210, Type of Contract;

5252.237-9602, Contractor Identification; and

5252.243-9600, Authorized Changes only by the Contracting Officer.

5/22/2017 Amendment 0001 Issued -



Amendment 0001 Issued



Post an answer to the question received.

o Question: Is there an incumbent contractor currently providing these services

to SSC

Pacific?

o Answer: There is no incumbent contractor currently providing these services

to SSC

Pacific. This is a new requirement.



The submission closing date remains unchanged: 31 May 2017 at 11:00 AM, Pacific

Time





********************************************************

5/11/2017

Solicitation Issued -



This requirement is to provide on-site support of Space and Naval Warfare

Systems

Center Pacific's (SSC Pacific's) Machine Shop for Code 52280, ISR EM Systems

Technology Competency. The contractor shall provide tooling, jig and fixture,

prototype,

and production parts fabrication services. The fabrication services are for

items

machined from Government generated technical drawings. The items to be

produced are

varied and undefined, but the function of the contractor is to produce items

within the

tolerances specified in the technical drawings and specifications.



This is a SSC Pacific combined synopsis/solicitation for commercial items

prepared in

accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of

Commercial

Items, and FAR Part 13, Simplified Acquisition Procedures.



This announcement constitutes the only solicitation. Competitive offers are

being

requested under (RFQ) # N66001-17-R-0144. The applicable North American

Industry

Classification System (NAICS) code is 541330, Engineering Services, with a size

standard

of $38.5 Million dollars. This is a Total Small Business Set-Aside. Any offer

that is

submitted by an offeror that is not a Small Business Concern will not be

considered for

award.



To be considered acceptable and eligible for award, Offers must provide all of

the items

and quantities listed below. The Government will not consider offers for

partial items or

quantities. Anticipated Contract Line Items are provided in Attachment 3,

Price Volume.

The Government anticipates this effort to be a Firm Fixed Price Level-of-Effort

(FFP-LOE)

type single award contract for a 12-month base period with four 12-month

options.



Offer Instructions:

The Government may consider offers that fail to follow instructions to be

unacceptable

and ineligible for award. In order to compete for the contract described in

this

synopsis/solicitation, follow the instructions outlined below (i.e. items 1

through 8).

Incomplete submissions may not be considered. Offers shall:

1. Include a separate Technical Volume (pages numbered) in PDF format that

excludes prices and pricing information;

2. Include a separate Price Volume (in Ms Excel format) that includes pricing

for each Contract Line Item Number (CLIN) in US Dollars ($).

3. Provide the Offeror name, address, Data Universal Numbering System

(DUNS) number, Contractor and Cage Entity (CAGE) code, business size and type

of

small business, Tax Identification Number (TIN), and telephone and e-mail

address of an

Offeror point of contact. Include teaming arrangement details (if applicable).

4. Complete all Fill-In Clauses: Provide all representations, certifications

and

fill-ins required by the solicitation for inclusion in any resulting contract.

Vendors must

be registered in the System for Award Management (SAM) to be eligible for

award; Offers

received without the completed copy of the provision at FAR 52.212-3 ALT I or

completed

SAM representation may be considered non-compliant.

5. Terms and Conditions: Offerors must include a statement that it either (a)

agrees to the terms and conditions of this solicitation (which consists of the

entire RFQ,

including all documents, exhibits, and other attachments that are incorporated

therein by

reference and made a part thereof) and any solicitation amendments; or (b)

takes

exceptions to any terms or conditions of the solicitation, and clearly

identifies those

exceptions. Exceptions to any of the terms and conditions of this RFQ may be

considered

by the Government to be unacceptable.

6. Specify quote validity period of no less than 180 days.

7. Stay within the page limitations indicated below for each Volume; and

8. All text shall be formatted on an 8 by 11 inch page in 12 point Times New

Roman font.



The Technical Volume shall address Factor I as follows:

Factor I. Required Personnel Experience

Offerors shall include resumes (not to exceed 2 pages per resume) for each of

the

individuals proposed in the following labor categories:

Sr. Machinist

Journeyman Machinist

Sr. Sheet Metal Mechanic



The Price Volume shall address Factors II as follows:

Factor II. Price

Offerors shall provide an hourly Unit Price and an Extended Price for each

Contract Line

Item Number (CLIN) and a total Firm-Fixed-Price for all line items provided in

Attachment 3, Price Volume. Offerors must ensure all blanks are completed and

mathematical calculations are accurate for all CLIN(s) 0001-4005.





Evaluation Factors for Award:

The Government will award a contract resulting from this solicitation to the

responsible

offeror whose offer conforming to the solicitation will be most advantageous to

the

Government, price and other factors considered. The Government anticipates

awarding a

FFP-LOE contract.



Factor I. Required Personnel Experience

Offerors will be considered "Acceptable" if the submitted resumes demonstrate:

6 years of experience relevant to the SOW for the proposed Sr. Machinist;

4 years of experience relevant to the SOW for the proposed Journeyman

Machinist; and

6 years of experience relevant to the SOW for the proposed Sr. Sheet Metal

Mechanic.



Note: Any offeror rated as "Unacceptable" under Factor I may be determined to

be

ineligible for contract award.



Factor II. Price

The offer will be evaluated based on the total firm-fixed-price. The Government

will

evaluate the total price to determine if it is fair and reasonable.



Basis For Award:

This procurement will use the Lowest Price Technically Acceptable (LPTA) source

selection

methodology.





Questions

Questions regarding this solicitation are to be submitted to SSC Pacific code

22710 via e

mail to David Roden (david.roden@navy.mil) or the ECommerce Central Question

Feature. Please use reference No. N6600117R0144. All questions regarding

this

solicitation must be received before 22 May 2017 at 11:00 AM, Pacific Time.



Proposal Submission

This solicitation closes on 31 May 2017 at 11:00 AM, Pacific Time. Offers must

be

uploaded on the SPAWAR e-Commerce website at https://e-

commerce.sscno.nmci.navy.mil, under SSC Pacific/Simplified

Acquisitions/N66001-17-R-

0144. E-mail offers will not be accepted. DO NOT email offers. Submissions

received

after the solicitation close date and time will not be accepted by the

Government.



For e-Commerce technical issues, please contact the SPAWAR Paperless

Initiatives Help

Desk at 858-537-0644 or paperless.spawar@navy.mil and e-mail the points of

contact

below before the close date and time of the solicitation.



The points of contact for this solicitation are David Roden at

david.roden@navy.mil and

Jacob Ward at jacob.ward@navy.mil. Please include RFQ# N66001-17-R-00144 on

all

inquiries. Questions may be addressed afterward at the discretion of the

Government.

No telephone questions will be entertained.



All responding vendors must have a completed registration in the System for

Award

Management (SAM) website prior to award of contract. Information can be found

at

https://www.sam.gov/. Complete SAM registration means a registered DUNS and

CAGE

Code.



Combined Synopsis/Solicitation Attachments are as follows:

Attachment 1: Performance Work Statement (PWS)

Attachment 2: Contract Data Requirements List (CDRL)

Attachment 3: Price Volume





This solicitation document incorporates standard commercial provisions and

clauses for

requirements in effect through Federal Acquisition Circular (FAC) 2005-95 and

Defense

Federal Acquisition Regulation Supplement (DFARS) Publication Notice 20161222.

Additional contract clauses may apply in the Terms and Conditions of the award

and

contractually binding at the time of award. It is the responsibility of the

offeror to be

familiar with the applicable clauses and provisions. In accordance with

52.252-1,

Solicitation Provisions Incorporated by Reference, and 52.252-2, Clauses

Incorporated by

Reference, all provisions and clauses can be accessed in full text at

www.farsite.hill.af.mil

or https://acquistion.gov/far/.



The following FAR and DFARS provisions, incorporated by reference, apply to

this

solicitation:

52.204-16, Commercial and Government Entity Code Reporting;

52.209-7, Information Regarding Responsibility Matters;

52.212-1, Instructions to Offerors -- Commercial Items (Tailored information

provided

above);

52.212-2, Evaluation -- Commercial Items (Tailored information provided above);

52.212-3 and Alt I, Offeror Representations and CertificationsCommercial Items;

52.217-5, Evaluation of Options;

252.203-7005, Representation Relating to Compensation of Former DoD Officials;

252.204-7008, Compliance with Safeguarding Covered Defense Information Controls;

252.204-7011, Alternative Line Item Structure;

252.215-7007, Notice of Intent to Resolicit;

252.215-7008, Only One Offer;

252.222-7007, Representation Regarding Combating Trafficking in Persons;

252.225-7031, Secondary Arab Boycott of Israel;

252.225-7050, Disclosure of Ownership or Control by the Government of a Country

that

is a State Sponsor of Terrorism

252.203-7994 (DEVIATION 2017-O0001), Prohibition on Contracting with Entities

that

Require Certain Internal Confidentiality AgreementsRepresentation (DEVIATION

2017-

O0001)





FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement

Statutes or

Executive Orders -- Commercial Items, applies to this solicitation and includes:

52.203-6 and Alt I, Restrictions on Subcontractor Sales to the Government;

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards;

52.209-6, Protecting the Government's Interest When Subcontracting with

Contractors

Debarred, Suspended, or Proposed for Debarment. (Dec 2010);

52.209-9, Updates of Publicly Available Information Regarding Responsibility

Matters;

52.219-6, Notice of Total Small Business Set-Aside;

52.219-8, Utilization of Small Business Concerns;

52.219-13, Notice of Set-Aside of Orders;

52.219-14, Limitations on Subcontracting;

52.219-28, Post-Award Small Business Program Representation;

52.222-3, Convict Labor (E.O. 11755);

52.222-21, Prohibition of Segregated Facilities (Feb 1999);

52.222-26, Equal Opportunity (E.O. 11246);

52.222-35, Equal Opportunity for Veterans;

52.222-36, Equal Opportunity for Workers with Disabilities;

52.222-37, Employment Reports on Veterans;

52.222-40, Notification of Employee Rights Under the National Labor Relations

Act;

52.222-50, Combating Trafficking in Persons;

52.222-53, Exemption from Application of the Service Contract Labor Standards

to

Contracts for Certain ServicesRequirements;

52.222-54, Employment Eligibility Verification

52.222-60, Paycheck Transparency (Executive Order 13673)

52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving;

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations,

and

statutes administered by the Office of Foreign Assets Control of the Department

of the

Treasury);

52.232-33, Payment by Electronic Funds TransferSystem for Award Management.





The following additional FAR and DFARS clauses, incorporated by reference,

apply to this

solicitation:

52.203-3, Gratuities;

52.204-18, Commercial and Government Entity Code Maintenance;

52.204-21, Basic Safeguarding of Covered Contractor Information Systems;

52.212-4, Contract Terms and Conditions -- Commercial Items;

52.217-9, Option to Extend Services;

52.232-40, Providing Accelerated Payments to Small Business Subcontractors;

252.203-7000, Requirements Relating to Compensation of Former DoD Officials;

252.203-7995 (DEVIATION 2017-O0001), Prohibition on Contracting with Entities

that

Require Certain Internal Confidentiality Agreements (DEVIATION 2017-O0001)

252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor

Reported

Cyber Incident Information;

252.204-7012, Safeguarding of Unclassified Controlled Technical Information;

252.204-7015, Disclosure of Information to Litigation Support Contractors;

252.225-7012, Preference for Certain Domestic Commodities;

252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic

Enterprises,

and Native Hawaiian Small Business Concerns;

252.227-7015, Technical DataCommercial Items;

252.227-7037, Validation of Restrictive Markings on Technical Data;

252.232-7003, Electronic Submission of Payment Requests and Receiving Reports;

252.232-7006, Wide Area Work Flow Payment Instructions;

252.232-7010, Levies on Contract Payments;

252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel;

252.243-7002, Requests for Equitable Adjustment;

252.244-7000, Subcontracts for Commercial Items;

252.246-7003, Notification of Potential Safety Issues;

252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military;

5252.201-9201, Designation of Contracting Officer's Representative;

5252.204-9202, Contractor Badge;

5252.209-9206, Employment of Navy Personnel Restricted;

5252.216-9210, Type of Contract;

5252.237-9602, Contractor Identification; and

5252.243-9600, Authorized Changes only by the Contracting Officer.

This requirement is to provide on-site support of Space and Naval Warfare Systems

Center Pacific's (SSC Pacific's) Machine Shop for Code 52280, ISR EM Systems

Technology Competency. The contractor shall provide tooling, jig and fixture,

prototype,

and production parts fabrication services. The fabrication services are for

items

machined from Government generated technical drawings. The items to be

produced are

varied and undefined, but the function of the contractor is to produce items

within the

tolerances specified in the technical drawings and specifications.



This is a SSC Pacific combined synopsis/solicitation for commercial items

prepared in

accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of

Commercial

Items, and FAR Part 13, Simplified Acquisition Procedures.



This announcement constitutes the only solicitation. Competitive offers are

being

requested under (RFQ) # N66001-17-R-0144. The applicable North American

Industry

Classification System (NAICS) code is 541330, Engineering Services, with a size

standard

of $38.5 Million dollars. This is a Total Small Business Set-Aside. Any offer

that is

submitted by an offeror that is not a Small Business Concern will not be

considered for

award.



To be considered acceptable and eligible for award, Offers must provide all of

the items

and quantities listed below. The Government will not consider offers for

partial items or

quantities. Anticipated Contract Line Items are provided in Attachment 3,

Price Volume.

The Government anticipates this effort to be a Firm Fixed Price Level-of-Effort

(FFP-LOE)

type single award contract for a 12-month base period with four 12-month

options.



Offer Instructions:

The Government may consider offers that fail to follow instructions to be

unacceptable

and ineligible for award. In order to compete for the contract described in

this

synopsis/solicitation, follow the instructions outlined below (i.e. items 1

through 8).

Incomplete submissions may not be considered. Offers shall:

1. Include a separate Technical Volume (pages numbered) in PDF format that

excludes prices and pricing information;

2. Include a separate Price Volume (in Ms Excel format) that includes pricing

for each Contract Line Item Number (CLIN) in US Dollars ($).

3. Provide the Offeror name, address, Data Universal Numbering System

(DUNS) number, Contractor and Cage Entity (CAGE) code, business size and type

of

small business, Tax Identification Number (TIN), and telephone and e-mail

address of an

Offeror point of contact. Include teaming arrangement details (if applicable).

4. Complete all Fill-In Clauses: Provide all representations, certifications

and

fill-ins required by the solicitation for inclusion in any resulting contract.

Vendors must

be registered in the System for Award Management (SAM) to be eligible for

award; Offers

received without the completed copy of the provision at FAR 52.212-3 ALT I or

completed

SAM representation may be considered non-compliant.

5. Terms and Conditions: Offerors must include a statement that it either (a)

agrees to the terms and conditions of this solicitation (which consists of the

entire RFQ,

including all documents, exhibits, and other attachments that are incorporated

therein by

reference and made a part thereof) and any solicitation amendments; or (b)

takes

exceptions to any terms or conditions of the solicitation, and clearly

identifies those

exceptions. Exceptions to any of the terms and conditions of this RFQ may be

considered

by the Government to be unacceptable.

6. Specify quote validity period of no less than 180 days.

7. Stay within the page limitations indicated below for each Volume; and

8. All text shall be formatted on an 8 by 11 inch page in 12 point Times New

Roman font.



The Technical Volume shall address Factor I as follows:

Factor I. Required Personnel Experience

Offerors shall include resumes (not to exceed 2 pages per resume) for each of

the

individuals proposed in the following labor categories:

Sr. Machinist

Journeyman Machinist

Sr. Sheet Metal Mechanic



The Price Volume shall address Factors II as follows:

Factor II. Price

Offerors shall provide an hourly Unit Price and an Extended Price for each

Contract Line

Item Number (CLIN) and a total Firm-Fixed-Price for all line items provided in

Attachment 3, Price Volume. Offerors must ensure all blanks are completed and

mathematical calculations are accurate for all CLIN(s) 0001-4005.





Evaluation Factors for Award:

The Government will award a contract resulting from this solicitation to the

responsible

offeror whose offer conforming to the solicitation will be most advantageous to

the

Government, price and other factors considered. The Government anticipates

awarding a

FFP-LOE contract.



Factor I. Required Personnel Experience

Offerors will be considered "Acceptable" if the submitted resumes demonstrate:

6 years of experience relevant to the SOW for the proposed Sr. Machinist;

4 years of experience relevant to the SOW for the proposed Journeyman

Machinist; and

6 years of experience relevant to the SOW for the proposed Sr. Sheet Metal

Mechanic.



Note: Any offeror rated as "Unacceptable" under Factor I may be determined to

be

ineligible for contract award.



Factor II. Price

The offer will be evaluated based on the total firm-fixed-price. The Government

will

evaluate the total price to determine if it is fair and reasonable.



Basis For Award:

This procurement will use the Lowest Price Technically Acceptable (LPTA) source

selection

methodology.





Questions

Questions regarding this solicitation are to be submitted to SSC Pacific code

22710 via e

mail to David Roden (david.roden@navy.mil) or the ECommerce Central Question

Feature. Please use reference No. N6600117R0144. All questions regarding

this

solicitation must be received before 22 May 2017 at 11:00 AM, Pacific Time.



Proposal Submission

This solicitation closes on 31 May 2017 at 11:00 AM, Pacific Time. Offers must

be

uploaded on the SPAWAR e-Commerce website at https://e-

commerce.sscno.nmci.navy.mil, under SSC Pacific/Simplified

Acquisitions/N66001-17-R-

0144. E-mail offers will not be accepted. DO NOT email offers. Submissions

received

after the solicitation close date and time will not be accepted by the

Government.



For e-Commerce technical issues, please contact the SPAWAR Paperless

Initiatives Help

Desk at 858-537-0644 or paperless.spawar@navy.mil and e-mail the points of

contact

below before the close date and time of the solicitation.



The points of contact for this solicitation are David Roden at

david.roden@navy.mil and

Jacob Ward at jacob.ward@navy.mil. Please include RFQ# N66001-17-R-00144 on

all

inquiries. Questions may be addressed afterward at the discretion of the

Government.

No telephone questions will be entertained.



All responding vendors must have a completed registration in the System for

Award

Management (SAM) website prior to award of contract. Information can be found

at

https://www.sam.gov/. Complete SAM registration means a registered DUNS and

CAGE

Code.



Combined Synopsis/Solicitation Attachments are as follows:

Attachment 1: Performance Work Statement (PWS)

Attachment 2: Contract Data Requirements List (CDRL)

Attachment 3: Price Volume





This solicitation document incorporates standard commercial provisions and

clauses for

requirements in effect through Federal Acquisition Circular (FAC) 2005-95 and

Defense

Federal Acquisition Regulation Supplement (DFARS) Publication Notice 20161222.

Additional contract clauses may apply in the Terms and Conditions of the award

and

contractually binding at the time of award. It is the responsibility of the

offeror to be

familiar with the applicable clauses and provisions. In accordance with

52.252-1,

Solicitation Provisions Incorporated by Reference, and 52.252-2, Clauses

Incorporated by

Reference, all provisions and clauses can be accessed in full text at

www.farsite.hill.af.mil

or https://acquistion.gov/far/.



The following FAR and DFARS provisions, incorporated by reference, apply to

this

solicitation:

52.204-16, Commercial and Government Entity Code Reporting;

52.209-7, Information Regarding Responsibility Matters;

52.212-1, Instructions to Offerors -- Commercial Items (Tailored information

provided

above);

52.212-2, Evaluation -- Commercial Items (Tailored information provided above);

52.212-3 and Alt I, Offeror Representations and CertificationsCommercial Items;

52.217-5, Evaluation of Options;

252.203-7005, Representation Relating to Compensation of Former DoD Officials;

252.204-7008, Compliance with Safeguarding Covered Defense Information Controls;

252.204-7011, Alternative Line Item Structure;

252.215-7007, Notice of Intent to Resolicit;

252.215-7008, Only One Offer;

252.222-7007, Representation Regarding Combating Trafficking in Persons;

252.225-7031, Secondary Arab Boycott of Israel;

252.225-7050, Disclosure of Ownership or Control by the Government of a Country

that

is a State Sponsor of Terrorism

252.203-7994 (DEVIATION 2017-O0001), Prohibition on Contracting with Entities

that

Require Certain Internal Confidentiality AgreementsRepresentation (DEVIATION

2017-

O0001)





FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement

Statutes or

Executive Orders -- Commercial Items, applies to this solicitation and includes:

52.203-6 and Alt I, Restrictions on Subcontractor Sales to the Government;

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards;

52.209-6, Protecting the Government's Interest When Subcontracting with

Contractors

Debarred, Suspended, or Proposed for Debarment. (Dec 2010);

52.209-9, Updates of Publicly Available Information Regarding Responsibility

Matters;

52.219-6, Notice of Total Small Business Set-Aside;

52.219-8, Utilization of Small Business Concerns;

52.219-13, Notice of Set-Aside of Orders;

52.219-14, Limitations on Subcontracting;

52.219-28, Post-Award Small Business Program Representation;

52.222-3, Convict Labor (E.O. 11755);

52.222-21, Prohibition of Segregated Facilities (Feb 1999);

52.222-26, Equal Opportunity (E.O. 11246);

52.222-35, Equal Opportunity for Veterans;

52.222-36, Equal Opportunity for Workers with Disabilities;

52.222-37, Employment Reports on Veterans;

52.222-40, Notification of Employee Rights Under the National Labor Relations

Act;

52.222-50, Combating Trafficking in Persons;

52.222-53, Exemption from Application of the Service Contract Labor Standards

to

Contracts for Certain ServicesRequirements;

52.222-54, Employment Eligibility Verification

52.222-60, Paycheck Transparency (Executive Order 13673)

52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving;

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations,

and

statutes administered by the Office of Foreign Assets Control of the Department

of the

Treasury);

52.232-33, Payment by Electronic Funds TransferSystem for Award Management.





The following additional FAR and DFARS clauses, incorporated by reference,

apply to this

solicitation:

52.203-3, Gratuities;

52.204-18, Commercial and Government Entity Code Maintenance;

52.204-21, Basic Safeguarding of Covered Contractor Information Systems;

52.212-4, Contract Terms and Conditions -- Commercial Items;

52.217-9, Option to Extend Services;

52.232-40, Providing Accelerated Payments to Small Business Subcontractors;

252.203-7000, Requirements Relating to Compensation of Former DoD Officials;

252.203-7995 (DEVIATION 2017-O0001), Prohibition on Contracting with Entities

that

Require Certain Internal Confidentiality Agreements (DEVIATION 2017-O0001)

252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor

Reported

Cyber Incident Information;

252.204-7012, Safeguarding of Unclassified Controlled Technical Information;

252.204-7015, Disclosure of Information to Litigation Support Contractors;

252.225-7012, Preference for Certain Domestic Commodities;

252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic

Enterprises,

and Native Hawaiian Small Business Concerns;

252.227-7015, Technical DataCommercial Items;

252.227-7037, Validation of Restrictive Markings on Technical Data;

252.232-7003, Electronic Submission of Payment Requests and Receiving Reports;

252.232-7006, Wide Area Work Flow Payment Instructions;

252.232-7010, Levies on Contract Payments;

252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel;

252.243-7002, Requests for Equitable Adjustment;

252.244-7000, Subcontracts for Commercial Items;

252.246-7003, Notification of Potential Safety Issues;

252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military;

5252.201-9201, Designation of Contracting Officer's Representative;

5252.204-9202, Contractor Badge;

5252.209-9206, Employment of Navy Personnel Restricted;

5252.216-9210, Type of Contract;

5252.237-9602, Contractor Identification; and

5252.243-9600, Authorized Changes only by the Contracting Officer.