Sling, small arms

Added: Mar 14, 2018 12:38 pm

 

 

Federal Business Opportunities Synopsis (FedBizOpps)

Information Form

The subject requirement is for the acquisition of NSN 1010-01-563-1636.  An Indefinite Quantity Long-Term solicitation will be for a three-year base period with and two one-year option periods which will be extended in one year increments, at the discretion of the Government. The total duration not exceed five years. NAIC 332994 applicable with Small Business Size Standard 1,000.  Solicitation will be Women Owned Small Business Set-Aside with full and open competition after exclusion of sources. The solicitation will be available on or about March 30, 2018 at https://www.dibbs.bsm.dla.mil/rfp/.

Hard copies are not available.  Increments and delivery schedule will be noted in the RFP.  FOB Origin is required. Inspection/Acceptance requirements will be at origin.  All responsible sources may submit an offer/quote, which shall be considered.  It is the responsibility of the offeror to obtain the additional data that is necessary to manufacture the item and provide this evidence to the Government.   Drawings/specifications will be available through the DIBBS link in the synopsis on the solicitation issue date.  While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors as described in the solicitation.

 Based upon market research, the Government is using the policies contained in Part 15, Contracting by Negotiation in its solicitation for the described supply or service.  Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement within 15 days of this notice. 

 

 

 

CLIN	NSN	Item Name	UM	ADQ
0001	1010-01-563-1636	Sling, Small Arms	EA	1,894

 

 

*** LTC PID Packaging Consolidated Text ***

 

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

 

NSN:015631636

     SLING,SMALL ARMS

     REFERENCE NUMBER:RD001

      REFERENCE NUMBER:RA001

      REFERENCE NUMBER:RQ001

      REFERENCE NUMBER:RQ002

      REFERENCE NUMBER:RQ009

      REFERENCE NUMBER:RQ011

      REFERENCE NUMBER:RQ013

      REFERENCE NUMBER:RP001

      REFERENCE NUMBER:RT001

      _______________EXCEPTION DATA____________________

      IF DRAWING NOTE GIVES OPTION FOR ZINC OR

     MANGANESE COATING THEN MANGANESE IS REQUIRED

      ______________END OF EXCEPTIONS_________________

 

     THE ITEM BEING PROCURED IS A CRITICAL GUN PART

     ITEM WITH UNIQUE REQUIREMENTS.

      PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

     REQUIRED BY MILITARY SPECIFICATION (S)

     APPLICABLE TO THIS CONTRACT WILL BE APPROVED

     BY THE CONTRACT POST AWARD CONTRACTING OFFICER

     (PCO).

     PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

     QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

     THE IDENTIFICATION OF THE ACTUAL

     MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

     SUBMITTED TO THE CONTRACTING OFFICER FOR

     INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

     TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

     FORMAL CONTRACT MODIFICATION.

 

     THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

     MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED

     IN THE TECHNICAL DATA PACKAGE.  CLAUSE I09A01

     (FAR CLAUSE 52.209-1) QUALIFICATION REQUIREMENTS

     IS APPLICABLE.  THE AWARDEE SHALL PROVIDE QPL/QML

     COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE

     APPLICABLE QPL(S)/QML(S).  THE IDENTIFICATION OF

     ALL APPLICABLE QPL/QML SOURCES MUST BE SUBMITTED

     TO THE CONTRACTING OFFICER FOR EVALUATION PRIOR

     TO CONTRACT AWARD.

 
     PRODUCT VERIFICATION TESTING (PVT) CLAUSE DLAD

     52.246-9004 MAY BE INVOKED FOR THE REFERENCED

     CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

     INSPECTED, PACKAGED AND MARKED AS REQUIRED IN

     THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

     DURING TESTING.

 

     PRODUCT VERIFICATION TESTING, IF INVOKED,

     WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

     EACH SHIPMENT.  THE CONTRACTOR MUST PROVIDE

     PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

     IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

     FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

     SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

     TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

     IN FOR TESTING.

 

     CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

 

     REFERENCE NUMBER:CS187

     REFERENCE NUMBER:ZL006

     REFERENCE NUMBER:CS147

     REFERENCE NUMBER:CS001

     REFERENCE NUMBER:ZDL54

     CRITICAL APPLICATION ITEM

    IAW BASIC DRAWING NR 19200 13019495

     REVISION NR A   DTD 05/08/2014

     PART PIECE NUMBER:

      IAW REFERENCE DRAWING NR 19200 12579607

     REVISION NR C   DTD 08/04/2009

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 13019495

     REVISION NR     DTD 11/06/2014

     PART PIECE NUMBER:

      IAW REFERENCE DRAWING NR 19200 13019495

     REVISION NR     DTD 04/09/2014

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 13051119

     REVISION NR     DTD 04/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13051120

     REVISION NR     DTD 05/08/2014

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 13051121

     REVISION NR     DTD 05/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13051122

     REVISION NR     DTD 05/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13051123

     REVISION NR     DTD 05/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13054230

     REVISION NR     DTD 05/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13054231

     REVISION NR     DTD 05/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13054232

     REVISION NR     DTD 05/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13054233

     REVISION NR     DTD 05/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13019495

     REVISION NR A   DTD 05/08/2014

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 12993884

     REVISION NR J   DTD 01/07/2016

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13051123

     REVISION NR A   DTD 02/18/2016

     PART PIECE NUMBER:

 

     IAW REFERENCE DRAWING NR 19200 13019495

     REVISION NR     DTD 03/08/2016

     PART PIECE NUMBER:

 

     PREP FOR DELIVERY

 

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

 

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

     QUP:001  PRES MTHD:ZZ  CLNG/DRY:Z  PRESV MAT:ZZ

     WRAP MAT:ZZ  CUSH/DUNN MAT:ZZ  CUSH/DUNN THKNESS:Z

     UNIT CONT:ZZ  OPI:A

     INTRMDTE CONT:ZZ  INTRMDTE CONT QTY:ZZZ

     PACK CODE:U

     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

     SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

 

     PACKAGING SHALL BE IN ACCORDANCE WITH SPECIAL

     PACKAGING INSTRUCTION 13019495.

 *********************************************************************************************

                                                   GLOSSARY

 *********************************************************************************************

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

     REFERENCE NUMBER RD001

     RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

     (CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

 

     REFERENCE NUMBER RA001

 

     RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

     AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

     SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

     REFERENCE NUMBER RQ001

     RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

     NON-MANUFACTURERS)

 

     REFERENCE NUMBER RQ002

 

     RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

     REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

 

     REFERENCE NUMBER RQ009

     RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

 

     REFERENCE NUMBER RQ011

 

     RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

 

     REFERENCE NUMBER RQ013

 

     RQ013: QUALIFIED SUPPLIERS LIST OF MANUFACTURERS (QSLM) FOR GUN PARTS.

      THIS IS A QUALIFIED ITEM.  QUALIFICATION REQUIREMENTS IN PROCUREMENT

     NOTE M02 "QUALIFIED SUPPLIERS LIST OF MANUFACTURERS (QSLM) FOR GUN PARTS

     FEDERAL STOCK CLASS (FSC) 1005, 1010, 1015, 1025, 1055, AND 1095" APPLY.

 

     REFERENCE NUMBER RP001

     RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

     REFERENCE NUMBER RT001

     RT001: MEASURING AND TEST EQUIPMENT

     REFERENCE NUMBER CS187

 

     CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

     USED NOR INCORPORATED IN ANY ITEMS TO BE

     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

     SPECIFICATION REQUIREMENTS.

 

     REFERENCE NUMBER ZL006

 

     This item contains a phosphate coating requirement

     IAW MIL-STD-171 and MIL-DTL-16232.  In lieu of the

     required submittal of a preproduction phosphate

     procedure the following is now required:  The

     contractor responsible for the actual coating

     procedure must be certified by the Performance

     Review Institute (PRI) to the Nadcap standard for

     the Phosphate chemical processes.  Verification of

     this certification may be required and must be

     supplied upon request of the Contracting Officer.

     REFERENCE NUMBER CS147

 

     "THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

     MUST CONFORM TO SOURCE CONTROL DRAWING. BY

     SUBMITTING AN OFFER, THE OFFEROR AGREES TO

     PROVIDE SOURCE CONTROLLED COMPONENTS FROM

     SOURCES APPROVED ON THE APPLICABLE SOURCE

     CONTROL DRAWING."

 

     REFERENCE NUMBER CS001

     THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

     EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

     ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

     JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

     STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

     AGREEMENTS.

     TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

     TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

     ADDRESS:

     https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx

     OR BY WRITING TO:

     DLA LOGISTICS INFORMATION SERVICE

     FEDERAL CENTER

     74 WASHINGTON AVE., NORTH

     BATTLE CREEK, MI 49037-3084

 

     TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

     CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

     DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

     THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

     EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

     GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

 

     NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

     REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

     OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

     EXPORT CONTROLLED TECHNICAL DATA.

 

     NOTE:  JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

     THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

     UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

     PERMITTED BY DODD 5230.25.

 

     REFERENCE NUMBER ZDL54

     A HECKLER AND KOCH M320 LICENSE AGREEMENT 29 RESTRICTED TECHNICAL DATA

     PACKAGE EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION

     CERTIFICATION CONDITIONS APPLY. VENDORS MUST COMPLETE AND RETURN THE

     FORMS LOCATED IN THE "29 HECKLER AND KOCH M320" LICENSE AGREEMENT FOLDER AVAILABLE AT

     https://pcf1x.bsm.dla.mil/cFolders