Silicone Heating Blanket

Added: Jun 18, 2012 1:34 pm THE AWARD WAS MADE TO SAM BARNEY.

The Naval Air Warfare Center Aircraft Division, Lakehurst, NJ is looking to procure the following: 94 each Flexible Silicone Heater Blankets, P/N SRL 1224-4 with an Option to procure an additional 94 each; and 94 each Flexible Silicone Heater Blankets, P/N SRL 1236-4 with an Option to procure an additional 94 each. The ProTherm Industries silicone rubber heater blankets have the salient characteristics required for use on the retrofit kit for the Mobile Nitrogen Gaseous Generator (MNGG). The silicone rubber heater blankets have been tested for reliability and safety over the last two (2) years without incident. Additionally, their design fits into the space currently available for the MNGG. This is a silicone mat with heater elements & wrapped around a membrane (cylinder) tube less than 1/8" thick. Inspection/Acceptance: Destination. Required delivery is thirty-five (35) days after receipt of award. Packaging/Preservation shall be Best Commercial Practice that assures no damage to subject details in shipment. FOB: Destination. This requirement is 100% Set-Aside for Small Business. The Government will accept Brand Name or Equal if the items are equivalent in physical, funcitonal, and performance characteristics and Clause 52.211-6 is being incorporated into this solicitation. An equal item to the brand name must have the following salient characteristics of P/N SRL1224-4; Size: 12 inch x 24 inch; Watt Density: 2.5 W/in2; Operating Voltage: 460 VAC; Grounding Provision: Must have a direct 3rd wire grounding provision; and Lead Length: 52 inch +/- 1 inch. P/N SRL1236-4: Size: 12 inch x 36 inch; Watt Density: 2.5 W/in2; Operating Voltage: 460 VAC; Grounding Provision: Must have a direct 3rd wire grounding provision; and Lead Length: 52 inch +/- 1 inch. These are components for a support equipment change kit for the MNGG. This is a combined synopsis/solicitation; this announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. All vendors must be registered in the Central Contract Registration (CCR) Database. The internet website is http://www.ccr.dlsc.dla.mil/ccringq or www.ccr.gov. It is mandatory to register with the CCR as your Duns Number(Data Universal Numbering System) and your CAGE (Commercial and Government Entity) code will be required to conduct business with the Department of Defense. In addition, all invoices will be electronically submitted in the Wide Area Work Flow(WAWF); information available in Clause 252,232-7003. Additional information required: Cage Code, Duns Number, Tax ID Number, Payment Terms, Delivery schedule, GSA contract number if applicable, Business size, and Email address. All responses will be made to Debbie Dewyea at fax 732-323-7192 or email: deborah.dewyea@navy.mil. All responsible sources may submit a quotation which, if received in a timely manner, shall be considered by the agency..

Added: May 03, 2012 1:51 pm The Naval Air Warfare Center Aircraft Division, Lakehurst, NJ is looking to procure the following: 94 each Flexible Silicone Heater Blankets, P/N SRL 1224-4 with an Option to procure an additional 94 each; and 94 each Flexible Silicone Heater Blankets, P/N SRL 1236-4 with an Option to procure an additional 94 each. The ProTherm Industries silicone rubber heater blankets have the salient characteristics required for use on the retrofit kit for the Mobile Nitrogen Gaseous Generator (MNGG). The silicone rubber heater blankets have been tested for reliability and safety over the last two (2) years without incident. Additionally, their design fits into the space currently available for the MNGG. This is a silicone mat with heater elements & wrapped around a membrane (cylinder) tube less than 1/8" thick. Inspection/Acceptance: Destination. Required delivery is thirty-five (35) days after receipt of award. Packaging/Preservation shall be Best Commercial Practice that assures no damage to subject details in shipment. FOB: Destination. This requirement is 100% Set-Aside for Small Business. The Government will accept Brand Name or Equal if the items are equivalent in physical, funcitonal, and performance characteristics and Clause 52.211-6 is being incorporated into this solicitation. An equal item to the brand name must have the following salient characteristics of P/N SRL1224-4; Size: 12 inch x 24 inch; Watt Density: 2.5 W/in2; Operating Voltage: 460 VAC; Grounding Provision: Must have a direct 3rd wire grounding provision; and Lead Length: 52 inch +/- 1 inch. P/N SRL1236-4: Size: 12 inch x 36 inch; Watt Density: 2.5 W/in2; Operating Voltage: 460 VAC; Grounding Provision: Must have a direct 3rd wire grounding provision; and Lead Length: 52 inch +/- 1 inch. These are components for a support equipment change kit for the MNGG. This is a combined synopsis/solicitation; this announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. All vendors must be registered in the Central Contract Registration (CCR) Database. The internet website is http://www.ccr.dlsc.dla.mil/ccringq or www.ccr.gov. It is mandatory to register with the CCR as your Duns Number(Data Universal Numbering System) and your CAGE (Commercial and Government Entity) code will be required to conduct business with the Department of Defense. In addition, all invoices will be electronically submitted in the Wide Area Work Flow(WAWF); information available in Clause 252,232-7003. Additional information required: Cage Code, Duns Number, Tax ID Number, Payment Terms, Delivery schedule, GSA contract number if applicable, Business size, and Email address. All responses will be made to Debbie Dewyea at fax 732-323-7192 or email: deborah.dewyea@navy.mil. All responsible sources may submit a quotation which, if received in a timely manner, shall be considered by the agency.