Shaft, Assembly

Closed Solicitation Posted

A later notice was posted: the Limited / Sole Source Justification from .

Solicitation number
SPE4A520Q0578
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Place of performance
Richmond, Virginia 23297, United States

Notice details come from SAM.gov. Updated .

About this opportunity

This solicitation from the Defense Logistics Agency Aviation seeks proposals to supply 55820 shaft assemblies. The agency will evaluate proposals utilizing price and past performance as approximately equal factors per the Past Performance Information Retrieval System. Proposals are due by 2:00 PM Eastern Standard Time on February 14, 2020.

No set-aside is designated for this requirement. The place of performance is Richmond, Virginia. The solicitation is for 55820 shaft assemblies to be supplied by United Technologies as the sole approved source per a Class Justification and Approval. Interested parties may submit capabilities statements by the deadline to be considered as potential alternate sources should United Technologies not represent best value. The point of contact is Desiree McCormick of the Defense Logistics Agency Aviation.

Notice text

A solicitation, request for quote (RFQ), will be issued via the DLA Internet Bid Board System (DIBBS). The item is sole source to United Technologies. The item is covered by a Class Justification and Approval for Other Than Full and Open Competition.

FSC

NIIN

Part Number

Cage

Quantity

Requested Delivery

COTS

Surge

CSI

Nomen

2835

012087789

4503191

55820

308

641

Yes

No

No

Shaft Assembly

Item Application: Helicopter, Chinook, CH-47

Options: None

Inspection & Acceptance: Destination

FOB: Origin

Approved Source: United Technologies (55820)

Point of Contact: Desiree McCormick, at 804-279-5794 Email: Desiree.McCormick@dla.mil

The proposed contract action is for supplies for which the Government intends to solicit and negotiate with only one or a limited number of sources under the authority of FAR 6.302.1. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within fifteen days after date of publication of this synopsis/solicitation will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

One or more of the items under this acquisition may be subject to Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in English language and in U.S. Dollars. All interested supplier may submit an offer.

Specifications, plans or drawings related to the procurement described are not available and cannot be furnished by the Government. The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation. In accordance with 10 U. S. C. 2304 (c) (1), other than full and open competition applies.

Conditions for evaluation and acceptance of offers for part numbered items cited in the acquisition identification description (AID). This agency has no data available for evaluating the acceptability of alternate products offered. In addition, clause 52.217-9002 has been replaced by procurement notices M06 and L04 which can be found at http://www.dla.mil/Portals/104/Documents/J7Acquisition/DLAD Procurement Notes-Effective 12-15-17.pdf? ver=2017-12-15-091527-907

Surplus dealers and small business dealers and distributors are invited to respond to this synopsis. The response should include a completed surplus certificate, DLAD 52.211-9000, which has been replaced by Procurement Note C04, or adequate traceability documentation to show product is acceptable. DLA will consider all such responses and may alter the acquisition strategy if purchase of existing surplus or newly-manufactured inventory through a dealer is in the best interests of the government. This acquisition is not being conducted on an all-or­ none basis; evaluation of offers will be line-by-line.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. Proposals are being requested and this announcement along with a written solicitation constitutes the solicitation.

  • The solicitation number is SPE4A5-20-Q-0578  issued as a request for quote (RFQ).
  • The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-75, dated June 24, 2014.
  • This acquisition is unrestricted; no set-aside applies.
  • Solicitation line item: see above table.
  • Requirements for the items to be acquired: The only acceptable manufacturing source for this item is United Tehcnologies (55820).
  • Dates and places of delivery will vary according to lead time and stock position at DLA warehouses.
  • The provision at 52.212-1, Instructions to Offerors-Commercial, applies to this acquisition.
  • The provision at 52.212-2, Evaluation-Commercial Items, does not apply. A best-value award determination will be made with price and past performance utilizing the Past Performance Information Retrieval System (PPIRS) receiving approximately equal weighting and other evaluation factors as described in the solicitation.
  • An offeror must include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items, with the offer
  • The clause at 52.212-4, Contract Terms and Conditions-Commercial Items, applies to this acquisition.
  • The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, applies to this acquisition.
  • The following additional clauses have been determined by the contracting officer to be necessary for this acquisition. In the event that United Technologies (55820) does not appear to be best value for any particular part upon evaluation of offers, such part(s) removed from this solicitation and may be re­ solicited separately.
  • Defense Priorities and Allocations System (DPAS) rating DO-A1 apply to items that are not commercial­ off-the-shelf (COTS). No DPAS rating applies to COTS items.
  • The final contract award decision may be based upon a combination of price, past performance and other evaluation factors as described in the solicitation utilizing the Past Performance Information Retrieval System (PPIRS). All responsible sources may submit an offer that will be considered. You must be registered in the System for Award Management (SAM). SAM registration is at http://www.sam.gov
  • The date, time and place offers are due by email to Desiree.Mccormick@dla.mil by 2:00 PM Easter Standard Time, on February 14, 2020.
  • The name and telephone number of the individual to contact for information regarding the solicitation is: Desiree McCormick, 804-279-5794.

Notice history

Notice Type Posted
Shaft, Assembly Latest Limited / Sole Source Justification
This notice Latest solicitation Solicitation
Shaft assembly Original Pre-Solicitation

Similar open opportunities

Opportunity Agency Set-aside Responses due
Gear and shaft asse NAICS 334511 Aviation Total Small Business
Shaft, shouldered NAICS 333613 Aviation No set-aside
Shaft assembly, limi NAICS 336413 Aviation Total Small Business
Shaft, shouldered NAICS 333613 Aviation No set-aside
Shaft assembly, flexibl NAICS 336413 Aviation Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity