Response Vehicle Modifications Kings Bay GA

The Federal Contract Opportunity involves modifications to an Explosive Ordinance Disposal (EOD) Mobile Unit SIX detachment Kings Bay emergency response vehicle. The modifications will expand equipment storage capacity, enhance communications capabilities, and enable EOD personnel to remotely operate the robot from inside the vehicle. The contractor will provide all necessary parts, equipment, cables, connectors, and mounting hardware, and the work will be inspected by the EOD Point of Contact (POC) to ensure proper installation and operability of installed electronic equipment.

List of products and services to be provided by the contractor:

1. Two custom aluminum storage shelves in the rear interior corner of the response vehicle.
2. One custom aluminum storage shelf in the interior storage closet.
3. One “David Clark headset” battery charging unit (A99-14CRG) adjacent to an existing charging unit in the response vehicle.
4. One industrial-rated electrical power strip on the rear interior wall of the vehicle’s workspace.
5. Installation of two government-furnished Motorola APX-6500 radios in the rear workspace of the vehicle on wall-mounted trays.
6. Installation of one government-furnished Motorola APX-6500 radio in the center console of the vehicle’s cab.
7. Three wideband (380-470 MHZ) radio antennas on the vehicle roof connected to the Motorola APX-6500 radios.
8. Three Motorola 13 watt external speakers connected to the Motorola APX-6500 radios.
9. One government-furnished “robot control” antenna on the retractable mast located on the top of the vehicle.
10. Video and data coaxial cable to connect the “robot control” antenna to the “robot control” module.
11. One Picatinny rail mount on the driver’s side cable management channel enclosure on the vehicle roof.
12. One National Electrical Manufacturers Association (NEMA) compliant battery enclosure on the vehicle roof.
13. Sealing of all holes made to the vehicle's exterior to prevent water intrusion.