Repair Building 7602, Fort Irwin, CA

Repair Building 7602, Fort Irwin, CA

The existing building (7602) is a one-story non-sprinklered building which currently handles ammunition sorting for the Army at Fort Irwin, CA. It is a combination of two connected structures; a reinforced concrete structure used as offices and support areas and a prefabricated metal building used as an ammunition and explosives magazine for sorting. There are four reinforced concrete magazines within the metal building; the remainder of the metal building consists of a work area and storage bay. The work will consist of replacing the roof, replacing the anti-spark coating on the floor, overhead sectional doors will be replaced, Lighting (interior and exterior) will be replaced with energy efficient lighting. The HVAC and evaporative coolers need to be replaced, interior repairs to walls and concrete flooring, waterless urinals, service grounding system, eyewash stations, compressor system, Fire Alarm / Fire Sprinklers, provide capability for BACNET system as well as other minor repairs.

The acquisition will be conducted under a competitively negotiated source selection process. Both a technical proposal and a price proposal will be required. The acquisition strategy is Best Value "Lowest Price Technically Acceptable." Award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. Non-cost factors (evaluation factors) may consist of the following: Construction Experience; Past Performance on projects similar in nature; Key Personnel (project superintendent, Quality Control Manager, Safety Manager). The aforementioned evaluation factors may not be all inclusive.

Competition is restricted to HUBZone small business concerns only. Status as a HUBZone small business concern is determined by the Small business Administration (SBA) in accordance with 13 CFR Part 126. To be eligible for a HUBZone contract, a HUBZone small business concern must be a HUBZone small business concern BOTH at the time of its initial offer and at the time of contract award.

All offerors are advised that this project may be delayed, cancelled or revised at any time during the solicitation, selection, evaluation, negotiation and/or final award process.

The solicitation will be available on or about April 28th, 2016. Plans and specifications will not be provided in hard paper copy. The solicitation and all amendments for this Request for Proposals will be posted on www.fbo.gov

It is the responsibility of the offeror to check www.fbo.gov frequently for any amendments or changes to the solicitation. The Government is not responsible for any loss of internet connectivity or for an offerors inability to access the documents posted at the referenced website. No CDs or hard copies will be made available.

If you would like to list your firm so that others can see you are an interested vendor, you must click the Add Me to Interested Vendors button in the listing for this solicitation on www.fbo.gov

Repair Building 7602, Fort Irwin, CA

The existing building (7602) is a one-story non-sprinklered building which currently handles ammunition sorting for the Army at Fort Irwin, CA. It is a combination of two connected structures; a reinforced concrete structure used as offices and support areas and a prefabricated metal building used as an ammunition and explosives magazine for sorting. There are four reinforced concrete magazines within the metal building; the remainder of the metal building consists of a work area and storage bay. The work will consist of replacing the roof, replacing the anti-spark coating on the floor, overhead sectional doors will be replaced, Lighting (interior and exterior) will be replaced with energy efficient lighting. The HVAC and evaporative coolers need to be replaced, interior repairs to walls and concrete flooring, waterless urinals, service grounding system, eyewash stations, compressor system, Fire Alarm / Fire Sprinklers, provide capability for BACNET system as well as other minor repairs.

The acquisition will be conducted under a competitively negotiated source selection process. Both a technical proposal and a price proposal will be required. The acquisition strategy is Best Value "Lowest Price Technically Acceptable." Award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. Non-cost factors (evaluation factors) may consist of the following: Construction Experience; Past Performance on projects similar in nature; Key Personnel (project superintendent, Quality Control Manager, Safety Manager). The aforementioned evaluation factors may not be all inclusive.

Competition is restricted to HUBZone small business concerns only. Status as a HUBZone small business concern is determined by the Small business Administration (SBA) in accordance with 13 CFR Part 126. To be eligible for a HUBZone contract, a HUBZone small business concern must be a HUBZone small business concern BOTH at the time of its initial offer and at the time of contract award.

All offerors are advised that this project may be delayed, cancelled or revised at any time during the solicitation, selection, evaluation, negotiation and/or final award process.

The solicitation will be available on or about April 28th, 2016. Plans and specifications will not be provided in hard paper copy. The solicitation and all amendments for this Request for Proposals will be posted on www.fbo.gov

It is the responsibility of the offeror to check www.fbo.gov frequently for any amendments or changes to the solicitation. The Government is not responsible for any loss of internet connectivity or for an offerors inability to access the documents posted at the referenced website. No CDs or hard copies will be made available.

If you would like to list your firm so that others can see you are an interested vendor, you must click the Add Me to Interested Vendors button in the listing for this solicitation on www.fbo.gov