Range Ops Support Building, Range General Purpose Maintenance Building, and SOF CNS Joint Ops Planning, Melrose Air Force Range, Cannon Air Force Base, Curry County, New Mexico

Range Ops Support Building, Range General Purpose Maintenance Building, and SOF CNS Joint Ops Planning, Melrose Air Force Range, Cannon Air Force Base, Curry County, New Mexico

The proposed procurement is a Small Business Set-Aside Best Value Lowest Price Technically Acceptable (LPTA) Request For Proposal (RFP), and thus open to small businesses only. NAICS is 236220/SIC 1541, with a size standard of $36,500,000.00. The magnitude of construction for this project will be between $5,000,000.00 and $10,000,000.00. Bonding will be required for this acquisition. Offerors attention is directed to Section 00100 in the Solicitation for information regarding the tour of the site. Plans will be issued on or about 31 October 2016, with proposals due on or about 30 November 2016. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.
THE PROJECT consists of the following:
SOF Joint Operations Range Planning Facility: Construction of an approximate 7,000 SF pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. Functional areas include a multi-use open bay for use as: team rooms, classrooms, joint operations center area and/or a large briefing area. Project includes site work, utility work, concrete, mechanical, internal mechanical room, 3-phase power, electrical, automatic heat detection and alarm systems, door systems, lightning protection system, communications, unimproved parking, landscaping and all other necessary supporting infrastructure. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. Antiterrorism/force protection measures will be included in accordance with Unified Facilities Criteria (UFC) 4-01001, DOD Minimum Antiterrorism Standards for Buildings dated 9 February 2012.
Range General Purpose Maintenance Facility: Construction of a maintenance facility comprised of a pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. This approximately 5,000 SF facility will include: an administration area with two main offices; 2 open bays for vehicle maintenance (up to road grader or very large tractor, JD 9600 8 wheel) size; storage of construction materials, chemicals, parts, and range target drones; insulated roll-up doors with electric operators and concrete access aprons. The floor plan will include restroom facilities and a kitchen area. One bay will include the installation of a lube pit with stairs, and the other bay will include a welding booth with exhaust hood, HAZMAT control area, and fuel/gas storage racks. The maintenance bay will include required ventilation and eyewash stations. The project includes utilities and installation, lightning protection, installation tying in of all communications (secure and non-secure) with antenna pad, fire detection, HVAC, pavements including parking, site improvements, landscaping and all other necessary supporting infrastructure. A septic system and associated piping, and potable water storage tanks and a booster pump will be shared with the Range Operations Support facility. Project will include all portable water piping, valves, and appurtenances. Force protection measures will be implemented as necessary. This project will comply with DOD antiterrorism/force protection requirements.

Range Operations Support Facility: Construction of an approximate 5,500 SF pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. Functional areas include open administration offices, foyer, briefing room, communication room, break room, men's and women's restrooms. Building will be equipped with air/heat for all offices. Project includes utilities and installation, lightning protection , installation and tying in of all communications (secure and non-secure) with antenna pad, fire suppression, HVAC, backup generator (bid option) with pad, pavements including parking, site improvements, landscaping and all associated facility support. A septic system and associated piping, and potable water storage tanks and a booster pump will be shared with the Range General Purpose Maintenance facility. Project will include all portable water piping, valves, and appurtenances. This project will comply with DOD antiterrorism/force protection.

THE PROJECT will be advertised as a Request for Proposal. Competitive proposals will be evaluated based on the evaluation criteria set forth in the solicitation package. Evaluation by the Government will result in selection of a firm that represents the best value to the Government. The proposed procurement will result in a firm-fixed price contract. Questions of a technical nature should be addressed to Ms. Eileen Shannon at (505) 343-6264 or e-mail at: Eileen.l.shannon@usace.army.mil. OFFERORS MUST BE REGISTERED with System for Award Management (SAM), in order to receive a Government Contract award. To register, the SAM Internet address is: http://www.sam.gov. Additionally, a paper form for registration may be obtained from the DoD Electronic Commerce Information Center at 1-800-334-3414.
This solicitation will be issued via Internet only. Notification of amendments shall be made via Internet only, as well. It is therefore the contractors' responsibility to check the following address daily for any posted changes to this solicitation. For security reasons, all technical and engineering data related to this solicitation will be distributed using the Federal Business Opportunity (FBO) system. FBO is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested offerors must register with FBO or they will not be able to download information from the site. Registration instructions can be found on the FedBizOpps website at www.fbo.gov by clicking on the Register Now hyperlink. Contractors registered with Federal Business Opportunity (FBO) may view and/or download this solicitation and all amendments from the Internet AFTER SOLICITATION ISSUANCE. Offerors are encouraged to post notices of prospective subcontracting opportunities on the FedBizOps website at www.fbo.gov. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.

Range Ops Support Building, Range General Purpose Maintenance Building, and SOF CNS Joint Ops Planning, Melrose Air Force Range, Cannon Air Force Base, Curry County, New Mexico

The proposed procurement is a Small Business Set-Aside Best Value Lowest Price Technically Acceptable (LPTA) Request For Proposal (RFP), and thus open to small businesses only. NAICS is 236220/SIC 1541, with a size standard of $36,500,000.00. The magnitude of construction for this project will be between $5,000,000.00 and $10,000,000.00. Bonding will be required for this acquisition. Offerors attention is directed to Section 00100 in the Solicitation for information regarding the tour of the site. Plans will be issued on or about 11 October 2016, with proposals due on or about 11 November 2016. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.
THE PROJECT consists of the following:
SOF Joint Operations Range Planning Facility: Construction of an approximate 7,000 SF pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. Functional areas include a multi-use open bay for use as: team rooms, classrooms, joint operations center area and/or a large briefing area. Project includes site work, utility work, concrete, mechanical, internal mechanical room, 3-phase power, electrical, automatic heat detection and alarm systems, door systems, lightning protection system, communications, unimproved parking, landscaping and all other necessary supporting infrastructure. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. Antiterrorism/force protection measures will be included in accordance with Unified Facilities Criteria (UFC) 4-01001, DOD Minimum Antiterrorism Standards for Buildings dated 9 February 2012.
Range General Purpose Maintenance Facility: Construction of a maintenance facility comprised of a pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. This approximately 5,000 SF facility will include: an administration area with two main offices; 2 open bays for vehicle maintenance (up to road grader or very large tractor, JD 9600 8 wheel) size; storage of construction materials, chemicals, parts, and range target drones; insulated roll-up doors with electric operators and concrete access aprons. The floor plan will include restroom facilities and a kitchen area. One bay will include the installation of a lube pit with stairs, and the other bay will include a welding booth with exhaust hood, HAZMAT control area, and fuel/gas storage racks. The maintenance bay will include required ventilation and eyewash stations. The project includes utilities and installation, lightning protection, installation tying in of all communications (secure and non-secure) with antenna pad, fire detection, HVAC, pavements including parking, site improvements, landscaping and all other necessary supporting infrastructure. A septic system and associated piping, and potable water storage tanks and a booster pump will be shared with the Range Operations Support facility. Project will include all portable water piping, valves, and appurtenances. Force protection measures will be implemented as necessary. This project will comply with DOD antiterrorism/force protection requirements.

Range Operations Support Facility: Construction of an approximate 5,500 SF pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. Functional areas include open administration offices, foyer, briefing room, communication room, break room, men's and women's restrooms. Building will be equipped with air/heat for all offices. Project includes utilities and installation, lightning protection , installation and tying in of all communications (secure and non-secure) with antenna pad, fire suppression, HVAC, backup generator (bid option) with pad, pavements including parking, site improvements, landscaping and all associated facility support. A septic system and associated piping, and potable water storage tanks and a booster pump will be shared with the Range General Purpose Maintenance facility. Project will include all portable water piping, valves, and appurtenances. This project will comply with DOD antiterrorism/force protection.

THE PROJECT will be advertised as a Request for Proposal. Competitive proposals will be evaluated based on the evaluation criteria set forth in the solicitation package. Evaluation by the Government will result in selection of a firm that represents the best value to the Government. The proposed procurement will result in a firm-fixed price contract. Questions of a technical nature should be addressed to Ms. Eileen Shannon at (505) 343-6264 or e-mail at: Eileen.l.shannon@usace.army.mil. OFFERORS MUST BE REGISTERED with System for Award Management (SAM), in order to receive a Government Contract award. To register, the SAM Internet address is: http://www.sam.gov. Additionally, a paper form for registration may be obtained from the DoD Electronic Commerce Information Center at 1-800-334-3414.
This solicitation will be issued via Internet only. Notification of amendments shall be made via Internet only, as well. It is therefore the contractors' responsibility to check the following address daily for any posted changes to this solicitation. For security reasons, all technical and engineering data related to this solicitation will be distributed using the Federal Business Opportunity (FBO) system. FBO is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested offerors must register with FBO or they will not be able to download information from the site. Registration instructions can be found on the FedBizOpps website at www.fbo.gov by clicking on the Register Now hyperlink. Contractors registered with Federal Business Opportunity (FBO) may view and/or download this solicitation and all amendments from the Internet AFTER SOLICITATION ISSUANCE. Offerors are encouraged to post notices of prospective subcontracting opportunities on the FedBizOps website at www.fbo.gov. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.

Range Ops Support Building, Range General Purpose Maintenance Building, and SOF CNS Joint Ops Planning, Melrose Air Force Range, Cannon Air Force Base, Curry County, New Mexico

The proposed procurement is a Small Business Set-Aside Best Value Lowest Price Technically Acceptable (LPTA) Request For Proposal (RFP), and thus open to small businesses only. NAICS is 236220/SIC 1541, with a size standard of $36,500,000.00. The magnitude of construction for this project will be between $5,000,000.00 and $10,000,000.00. Bonding will be required for this acquisition. Offerors attention is directed to Section 00100 in the Solicitation for information regarding the tour of the site. Plans will be issued on or about 3 October 2016, with proposals due on or about 3 November 2016. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.
THE PROJECT consists of the following:
SOF Joint Operations Range Planning Facility: Construction of an approximate 7,000 SF pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. Functional areas include a multi-use open bay for use as: team rooms, classrooms, joint operations center area and/or a large briefing area. Project includes site work, utility work, concrete, mechanical, internal mechanical room, 3-phase power, electrical, automatic heat detection and alarm systems, door systems, lightning protection system, communications, unimproved parking, landscaping and all other necessary supporting infrastructure. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. Antiterrorism/force protection measures will be included in accordance with Unified Facilities Criteria (UFC) 4-01001, DOD Minimum Antiterrorism Standards for Buildings dated 9 February 2012.
Range General Purpose Maintenance Facility: Construction of a maintenance facility comprised of a pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. This approximately 5,000 SF facility will include: an administration area with two main offices; 2 open bays for vehicle maintenance (up to road grader or very large tractor, JD 9600 8 wheel) size; storage of construction materials, chemicals, parts, and range target drones; insulated roll-up doors with electric operators and concrete access aprons. The floor plan will include restroom facilities and a kitchen area. One bay will include the installation of a lube pit with stairs, and the other bay will include a welding booth with exhaust hood, HAZMAT control area, and fuel/gas storage racks. The maintenance bay will include required ventilation and eyewash stations. The project includes utilities and installation, lightning protection, installation tying in of all communications (secure and non-secure) with antenna pad, fire detection, HVAC, pavements including parking, site improvements, landscaping and all other necessary supporting infrastructure. A septic system and associated piping, and potable water storage tanks and a booster pump will be shared with the Range Operations Support facility. Project will include all portable water piping, valves, and appurtenances. Force protection measures will be implemented as necessary. This project will comply with DOD antiterrorism/force protection requirements.

Range Operations Support Facility: Construction of an approximate 5,500 SF pre-engineered metal building with reinforced concrete foundation and floor slab, insulation, and a sloping metal roof. Functional areas include open administration offices, foyer, briefing room, communication room, break room, men's and women's restrooms. Building will be equipped with air/heat for all offices. Project includes utilities and installation, lightning protection , installation and tying in of all communications (secure and non-secure) with antenna pad, fire suppression, HVAC, backup generator (bid option) with pad, pavements including parking, site improvements, landscaping and all associated facility support. A septic system and associated piping, and potable water storage tanks and a booster pump will be shared with the Range General Purpose Maintenance facility. Project will include all portable water piping, valves, and appurtenances. This project will comply with DOD antiterrorism/force protection.

THE PROJECT will be advertised as a Request for Proposal. Competitive proposals will be evaluated based on the evaluation criteria set forth in the solicitation package. Evaluation by the Government will result in selection of a firm that represents the best value to the Government. The proposed procurement will result in a firm-fixed price contract. Questions of a technical nature should be addressed to Ms. Eileen Shannon at (505) 343-6264 or e-mail at: Eileen.l.shannon@usace.army.mil. OFFERORS MUST BE REGISTERED with System for Award Management (SAM), in order to receive a Government Contract award. To register, the SAM Internet address is: http://www.sam.gov. Additionally, a paper form for registration may be obtained from the DoD Electronic Commerce Information Center at 1-800-334-3414.
This solicitation will be issued via Internet only. Notification of amendments shall be made via Internet only, as well. It is therefore the contractors' responsibility to check the following address daily for any posted changes to this solicitation. For security reasons, all technical and engineering data related to this solicitation will be distributed using the Federal Business Opportunity (FBO) system. FBO is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested offerors must register with FBO or they will not be able to download information from the site. Registration instructions can be found on the FedBizOpps website at www.fbo.gov by clicking on the Register Now hyperlink. Contractors registered with Federal Business Opportunity (FBO) may view and/or download this solicitation and all amendments from the Internet AFTER SOLICITATION ISSUANCE. Offerors are encouraged to post notices of prospective subcontracting opportunities on the FedBizOps website at www.fbo.gov. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.

Range Ops Support Building, Range General Purpose Maintenance Building, and SOF CNS Joint Ops Planning, Melrose Air Force Range, Cannon Air Force Base, Curry County, New Mexico
The proposed procurement is a Small Business Set-Aside Best Value Lowest Price Technically Acceptable (LPTA) Request For Proposal (RFP), and thus open to small businesses only. NAICS is 236220/SIC 1541, with a size standard of $36,500,000.00. The magnitude of construction for this project will be between $5,000,000.00 and $10,000,000.00. Bonding will be required for this acquisition. Offerors attention is directed to Section 00100 in the Solicitation for information regarding the tour of the site. Plans will be issued on or about 6 September 2016, with proposals due on or about 6 October 2016. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.

THE PROJECT consists of the following:

SOF Joint Operations Range Planning Facility: Construction of a 7,373 SF pre-engineered metal building with reinforced concrete foundation and floor slab, insulation and sloping metal roof. Functional areas include multi-use open bay for use as, team rooms, classrooms, joint operations center area and large briefing area. Includes site work, utility work, concrete, mechanical, internal mechanical room, 3-phase power, electrical, automatic heat detection system & alarm system, door systems, lightning protection system, geotechnical soil sampling, communications, unimproved parking, landscaping and all other necessary supporting infrastructure. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. Antiterrorism/force protection measures will be included in accordance with Unified Facilities Criteria (UFC) 4-010-01, DOD Minimum Antiterrorism Standards for Buildings dated 9 February 2012. Geotechnical survey is required.

Range General Purpose Maintenance Facility: Provide a maintenance facility to ensure appropriate maintenance of range vehicles. This approximately 5,000 SF facility will include: an administration area with two main offices, a shop area for woodworking, target construction, and welding, 2 open bays for vehicle maintenance (up to road grader or very large tractor, JD 9600 8 wheel) size and storage of construction materials, chemicals, parts, and range target drones, insulated roll-up doors with electric operators and concrete access aprons. The floor plan will include restroom facilities for 10 personnel, a locker room, and a kitchen area. The bay will include the installation of a lube pit with stairs, and the bay will also include a welding booth with exhaust hood, HAZMAT control area, and fuel/gas storage racks. The maintenance bay will include required floor drains, ventilation and eyewash stations. Project includes utilities and installation and tying in of all communications (secure and non-secure) with antenna pad, fire suppression, HVAC, septic system and associated piping, potable water storage tank and booster pump, portable water piping, valves, and appurtenances, pavements including parking, site improvements, landscaping and all associated facility support. Force protection measures will be implemented as necessary. This project will comply with DoD antiterrorism/force protection requirements.

Range Operations Support Facility: Provide a 5,650 SF multi-purpose steel frame structure with reinforced concrete foundation and floor slab with masonry walls. Functional areas include open administration offices, foyer, briefing room, communication room, break room, men's and women's restrooms. Space will also be provided for natural resources management and personnel. Building will be equipped with central air/heat for all offices. Project includes utilities and installation and tying in of all communications (secure and non-secure) with antenna pad, fire suppression, HVAC, backup generator with pad and tank, septic system and associated piping, potable water storage tank and booster pump, portable water piping, valves and appurtenances, pavements including parking, site improvements, landscaping and all associated facility support. This project also includes the demolition of facility 3121. This project will comply with DoD antiterrorism/force protection requirements.

THE PROJECT will be advertised as a Request for Proposal. Competitive proposals will be evaluated based on the evaluation criteria set forth in the solicitation package. Evaluation by the Government will result in selection of a firm that represents the best value to the Government. The proposed procurement will result in a firm-fixed price contract. Questions of a technical nature should be addressed to Ms. Eileen Shannon at (505) 343-6264 or e-mail at: Eileen.l.shannon@usace.army.mil. OFFERORS MUST BE REGISTERED with System for Award Management (SAM), in order to receive a Government Contract award. To register, the SAM Internet address is: http://www.sam.gov. Additionally, a paper form for registration may be obtained from the DoD Electronic Commerce Information Center at 1-800-334-3414.

This solicitation will be issued via Internet only. Notification of amendments shall be made via Internet only, as well. It is therefore the contractors' responsibility to check the following address daily for any posted changes to this solicitation. For security reasons, all technical and engineering data related to this solicitation will be distributed using the Federal Business Opportunity (FBO) system. FBO is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested offerors must register with FBO or they will not be able to download information from the site. Registration instructions can be found on the FedBizOpps website at www.fbo.gov by clicking on the Register Now hyperlink. Contractors registered with Federal Business Opportunity (FBO) may view and/or download this solicitation and all amendments from the Internet AFTER SOLICITATION ISSUANCE. Offerors are encouraged to post notices of prospective subcontracting opportunities on the FedBizOps website at www.fbo.gov. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.

Range Ops Support Building, Range General Purpose Maintenance Building, and SOF CNS Joint Ops Planning, Melrose Air Force Range, Cannon Air Force Base, Curry County, New Mexico
The proposed procurement is a Small Business Set-Aside Best Value Tradeoff Request For Proposal (RFP), and thus open to small businesses only. NAICS is 236220/SIC 1541, with a size standard of $36,500,000.00. The magnitude of construction for this project will be between $5,000,000.00 and $10,000,000.00. Bonding will be required for this acquisition. Offerors attention is directed to Section 00100 in the Solicitation for information regarding the tour of the site. Plans will be issued on or about 6 September 2016, with proposals due on or about 6 October 2016. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.

THE PROJECT consists of the following:

SOF Joint Operations Range Planning Facility: Construction of a 7,373 SF pre-engineered metal building with reinforced concrete foundation and floor slab, insulation and sloping metal roof. Functional areas include multi-use open bay for use as, team rooms, classrooms, joint operations center area and large briefing area. Includes site work, utility work, concrete, mechanical, internal mechanical room, 3-phase power, electrical, automatic heat detection system & alarm system, door systems, lightning protection system, geotechnical soil sampling, communications, unimproved parking, landscaping and all other necessary supporting infrastructure. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. Antiterrorism/force protection measures will be included in accordance with Unified Facilities Criteria (UFC) 4-010-01, DOD Minimum Antiterrorism Standards for Buildings dated 9 February 2012. Geotechnical survey is required.

Range General Purpose Maintenance Facility: Provide a maintenance facility to ensure appropriate maintenance of range vehicles. This approximately 5,000 SF facility will include: an administration area with two main offices, a shop area for woodworking, target construction, and welding, 2 open bays for vehicle maintenance (up to road grader or very large tractor, JD 9600 8 wheel) size and storage of construction materials, chemicals, parts, and range target drones, insulated roll-up doors with electric operators and concrete access aprons. The floor plan will include restroom facilities for 10 personnel, a locker room, and a kitchen area. The bay will include the installation of a lube pit with stairs, and the bay will also include a welding booth with exhaust hood, HAZMAT control area, and fuel/gas storage racks. The maintenance bay will include required floor drains, ventilation and eyewash stations. Project includes utilities and installation and tying in of all communications (secure and non-secure) with antenna pad, fire suppression, HVAC, septic system and associated piping, potable water storage tank and booster pump, portable water piping, valves, and appurtenances, pavements including parking, site improvements, landscaping and all associated facility support. Force protection measures will be implemented as necessary. This project will comply with DoD antiterrorism/force protection requirements.

Range Operations Support Facility: Provide a 5,650 SF multi-purpose steel frame structure with reinforced concrete foundation and floor slab with masonry walls. Functional areas include open administration offices, foyer, briefing room, communication room, break room, men's and women's restrooms. Space will also be provided for natural resources management and personnel. Building will be equipped with central air/heat for all offices. Project includes utilities and installation and tying in of all communications (secure and non-secure) with antenna pad, fire suppression, HVAC, backup generator with pad and tank, septic system and associated piping, potable water storage tank and booster pump, portable water piping, valves and appurtenances, pavements including parking, site improvements, landscaping and all associated facility support. This project also includes the demolition of facility 3121. This project will comply with DoD antiterrorism/force protection requirements.

THE PROJECT will be advertised as a Request for Proposal. Competitive proposals will be evaluated based on the evaluation criteria set forth in the solicitation package. Evaluation by the Government will result in selection of a firm that represents the best value to the Government. The proposed procurement will result in a firm-fixed price contract. Questions of a technical nature should be addressed to Ms. Eileen Shannon at (505) 343-6264 or e-mail at: Eileen.l.shannon@usace.army.mil. OFFERORS MUST BE REGISTERED with System for Award Management (SAM), in order to receive a Government Contract award. To register, the SAM Internet address is: http://www.sam.gov. Additionally, a paper form for registration may be obtained from the DoD Electronic Commerce Information Center at 1-800-334-3414.

This solicitation will be issued via Internet only. Notification of amendments shall be made via Internet only, as well. It is therefore the contractors' responsibility to check the following address daily for any posted changes to this solicitation. For security reasons, all technical and engineering data related to this solicitation will be distributed using the Federal Business Opportunity (FBO) system. FBO is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested offerors must register with FBO or they will not be able to download information from the site. Registration instructions can be found on the FedBizOpps website at www.fbo.gov by clicking on the Register Now hyperlink. Contractors registered with Federal Business Opportunity (FBO) may view and/or download this solicitation and all amendments from the Internet AFTER SOLICITATION ISSUANCE. Offerors are encouraged to post notices of prospective subcontracting opportunities on the FedBizOps website at www.fbo.gov. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process, and is subject to the availability of funds.