R. S. Kerr Stop-Logs

Amendment 0002
The purpose of this Amendment is to extend the offer due date to Noon CST on 10 September 2018 and to remove the references to ISO located at SECTION L under 3.1.2. Sub-Factor 2 (TAB 1B) - Quality Control, and to remove the references to ISO located at SECTION M under 2.4.1.2. Sub-Factor 2 - Quality Control..

Added: Sep 05, 2018 2:10 pm Amendment 0002

The purpose of this Amendment is to extend the offer due date to Noon CST on 10 September 2018 and to remove the references to ISO located at SECTION L under 3.1.2. Sub-Factor 2 (TAB 1B) - Quality Control, and to remove the references to ISO located at SECTION M under 2.4.1.2. Sub-Factor 2 - Quality Control.

Amendment 0001
The purpose of this amendment is to add the delivery schedule to the pricing schedule. The due date for receipt of proposals remains unchanged. NOTE: all offerors must sign and return this and all amendments with their proposal.

.

Added: Aug 23, 2018 11:44 am

Amendment 0001
The purpose of this amendment is to add the delivery schedule to the pricing schedule. The due date for receipt of proposals remains unchanged. NOTE: all offerors must sign and return this and all amendments with their proposal.

Pre-solicitation Notice

Stop-Log Procurement

Navigation Project Office, Sallisaw, Oklahoma

W912BV18R0030

U.S. Army Corps of Engineers, Southwestern Division (SWD), Tulsa District (SWT) intends to issue a solicitation, W912BV18R0030 to procure eighteen (18) stop-logs (a hydraulic steel structure which could also be called a portable bulkhead or portable water retention gate) and at least one (1) lifting beam as a supply contract.

The solicitation will be a small business set-aside supply procurement. The North American Industrial Classification System (NAICS) Code is 332312 (Fabricated Structural Metal Manufacturing) and the applicable Small Business Size Standard, as established by the U.S. Small Business Administration, is 500 Employees. The fabricating plant and fabricator shall be certified under the AISC (American Institute of Steel Construction) Quality Certification Program, and shall be designated as an AISC Certified Plant, Category IBR (Intermediate Steel Bridge), or Category ABR (Advanced Steel Bridge) or Category HYD (Hydraulic Steel Structure). In addition to meeting one or more of the AISC Quality Certification Programs, the fabricator shall hold a Fracture Critical Endorsement (FC). All qualifications shall be current at time of offer and shall remain current throughout the duration of the contract. All welding and inspection of welds shall be done in accordance with AWS D1.5. Welders, tackers, and operators shall be qualified in accordance with AWS D1.5.

The resulting supply contract will be issued on a Firm Fixed Price basis to the lowest priced offeror who submits a technical proposal that is otherwise technically acceptable ("Acceptable") when reviewed against all of the Factors outlined in the RFP. The anticipated award date is on or about 30 September 2018.

The solicitation will be issued via Internet only on Feb Biz Opps Website at http://www.fbo.gov. It is the contractors' responsibility to monitor the above-listed internet address for any posted changes. Any and all amendments posted shall be signed and submitted with the offer.

Solicitation issue date is anticipated to be on or about 8 August2018. Quotes are anticipated to be due on or about 7 September 2018. Contractors must be registered and current with System for Award Management (SAM) in order to receive a Government contract award. To register, the SAM Internet address is: http://www.sam.gov.

The Previous Contract Information: This is a new requirement, no previous contract information is available.

Any questions and inquiries related to this solicitation shall be submitted through Bidder's Inquiry only.

The Solicitation Number is: W912BV18R0030

The Bidder Inquiry Key is: NEI9PZ-DKBZ6Q

Sustainability clauses are currently not anticipated for this requirement.

"One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements."

The tentative general summary of the work to be performed is to fabricate at least eighteen (18) stop-logs and at least one (1) lifting beam. Perform a hang test and stacking test for each stoplog and a hang test and proof load test for each lifting beam fabricated. The Contractor shall provide all plant, materials, equipment, labor, instruments, tools, subcontractors (per FAR 52.219-14(c)(2) "Supplies (other than procurement from a nonmanufacturer of such supplies). The concern shall perform work for at least 50 percent of the cost of manufacturing the supplies, not including the cost of materials."), supervision, management, transportation, and travel necessary to complete all work in accordance with this summary of work, the attached drawings, the specifications, and all other contract documents and requirements. The Government will provide no materials, equipment, transportation, or labor.

The work required is summarized as follows:

a. Fabrication and painting of stoplogs and lifting beam(s);

b. Hang testing and adjustment by counterweighting for plumb in the longitudinal and transverse directions of each stoplog and lifting beam fabricated;

c. Proof load testing and marking per ASME B30.20 of each lifting beam fabricated; and

d. Delivery of stoplogs and lifting beam(s)

Tentatively Contractor Submittal Requirements include: The contractor shall submit the documents listed below to the Contracting Officer's Representative (COR) and the Contracting Officer prior to starting work. All submittals, other than copies of contracts, shall be typed and the original and one copy shall be furnished the Contracting Officer (unless the documentation is provided digitally). Unless specifically noted in the requirement all submittals shall be provided free of proprietary markings and shall become property of the Government or shall have Governmental Rights assigned. If the Contracting Officer determines any of the submittals do not comply with specifications, the contractor shall resubmit these documents within five (5) business days.

- Names of project manager and their alternate (submit prior to initiation of work and prior to changing designated employees).

- Quality Control Plan (submit prior to initiation of work).

- Work plan/Production schedule (submit prior to initiation of work, must be submitted within 30 days of contract award).

- Contractor's, manufacturer's, or fabricator's drawings
- Descriptive literature including (but not limited to) catalog cuts, diagrams, operating charts or curves

- Test reports

- O & M manuals (including parts list)

- Certifications

- Warranties

TULSA DISTRICT CORPS OF ENGINEERS
DOUGLAS BUFFINGTON, CECT-SWT-E
2488 East 81st Street
TULSA, OK 74137
918-669-7078
Douglas.D.Buffington@USACE.Army.mil
FAX: (918) 669-7436/7495

.

Added: May 29, 2018 4:25 pm Modified: Aug 08, 2018 9:44 amTrack Changes

Pre-solicitation Notice

Stop-Log Procurement

Navigation Project Office, Sallisaw, Oklahoma

W912BV18R0030

U.S. Army Corps of Engineers, Southwestern Division (SWD), Tulsa District (SWT) intends to issue a solicitation, W912BV18R0030 to procure eighteen (18) stop-logs (a hydraulic steel structure which could also be called a portable bulkhead or portable water retention gate) and at least one (1) lifting beam as a supply contract.

The solicitation will be a small business set-aside supply procurement. The North American Industrial Classification System (NAICS) Code is 332312 (Fabricated Structural Metal Manufacturing) and the applicable Small Business Size Standard, as established by the U.S. Small Business Administration, is 500 Employees. The fabricating plant and fabricator shall be certified under the AISC (American Institute of Steel Construction) Quality Certification Program, and shall be designated as an AISC Certified Plant, Category IBR (Intermediate Steel Bridge), or Category ABR (Advanced Steel Bridge) or Category HYD (Hydraulic Steel Structure). In addition to meeting one or more of the AISC Quality Certification Programs, the fabricator shall hold a Fracture Critical Endorsement (FC). All qualifications shall be current at time of offer and shall remain current throughout the duration of the contract. All welding and inspection of welds shall be done in accordance with AWS D1.5. Welders, tackers, and operators shall be qualified in accordance with AWS D1.5.

The resulting supply contract will be issued on a Firm Fixed Price basis to the lowest priced offeror who submits a technical proposal that is otherwise technically acceptable ("Acceptable") when reviewed against all of the Factors outlined in the RFP. The anticipated award date is on or about 30 September 2018.

The solicitation will be issued via Internet only on Feb Biz Opps Website at http://www.fbo.gov. It is the contractors' responsibility to monitor the above-listed internet address for any posted changes. Any and all amendments posted shall be signed and submitted with the offer.

Solicitation issue date is anticipated to be on or about 8 August2018. Quotes are anticipated to be due on or about 7 September 2018. Contractors must be registered and current with System for Award Management (SAM) in order to receive a Government contract award. To register, the SAM Internet address is: http://www.sam.gov.

The Previous Contract Information: This is a new requirement, no previous contract information is available.

Any questions and inquiries related to this solicitation shall be submitted through Bidder's Inquiry only.

The Solicitation Number is: W912BV18R0030

The Bidder Inquiry Key is: NEI9PZ-DKBZ6Q

Sustainability clauses are currently not anticipated for this requirement.

"One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements."

The tentative general summary of the work to be performed is to fabricate at least eighteen (18) stop-logs and at least one (1) lifting beam. Perform a hang test and stacking test for each stoplog and a hang test and proof load test for each lifting beam fabricated. The Contractor shall provide all plant, materials, equipment, labor, instruments, tools, subcontractors (per FAR 52.219-14(c)(2) "Supplies (other than procurement from a nonmanufacturer of such supplies). The concern shall perform work for at least 50 percent of the cost of manufacturing the supplies, not including the cost of materials."), supervision, management, transportation, and travel necessary to complete all work in accordance with this summary of work, the attached drawings, the specifications, and all other contract documents and requirements. The Government will provide no materials, equipment, transportation, or labor.

The work required is summarized as follows:

     a. Fabrication and painting of stoplogs and lifting beam(s);

     b. Hang testing and adjustment by counterweighting for plumb in the longitudinal and transverse directions of each stoplog and lifting beam fabricated;

     c. Proof load testing and marking per ASME B30.20 of each lifting beam fabricated; and

     d. Delivery of stoplogs and lifting beam(s)

Tentatively Contractor Submittal Requirements include: The contractor shall submit the documents listed below to the Contracting Officer's Representative (COR) and the Contracting Officer prior to starting work. All submittals, other than copies of contracts, shall be typed and the original and one copy shall be furnished the Contracting Officer (unless the documentation is provided digitally). Unless specifically noted in the requirement all submittals shall be provided free of proprietary markings and shall become property of the Government or shall have Governmental Rights assigned. If the Contracting Officer determines any of the submittals do not comply with specifications, the contractor shall resubmit these documents within five (5) business days.

     - Names of project manager and their alternate (submit prior to initiation of work and prior to changing designated employees).

     - Quality Control Plan (submit prior to initiation of work).

     - Work plan/Production schedule (submit prior to initiation of work, must be submitted within 30 days of contract award).

     - Contractor's, manufacturer's, or fabricator's drawings

     - Descriptive literature including (but not limited to) catalog cuts, diagrams, operating charts or curves

     - Test reports

     - O&M manuals (including parts list)

     - Certifications

     - Warranties

TULSA DISTRICT CORPS OF ENGINEERS
DOUGLAS BUFFINGTON, CECT-SWT-E
2488 East 81st Street
TULSA, OK 74137
918-669-7078
Douglas.D.Buffington@USACE.Army.mil
FAX: (918) 669-7436/7495

Pre-solicitation Notice

Stop-Log Procurement

Navigation Project Office, Sallisaw, Oklahoma

W912BV18R0030

U.S. Army Corps of Engineers, Southwestern Division (SWD), Tulsa District (SWT) intends to issue a solicitation, W912BV18R0030 to procure eighteen (18) stop-logs (a hydraulic steel structure which could also be called a portable bulkhead or portable water retention gate) and at least one (1) lifting beam as a supply contract.

The solicitation will be a small business set-aside supply procurement. The North American Industrial Classification System (NAICS) Code is 332312 (Fabricated Structural Metal Manufacturing) and the applicable Small Business Size Standard, as established by the U.S. Small Business Administration, is 500 Employees. The fabricating plant and fabricator shall be certified under the AISC (American Institute of Steel Construction) Quality Certification Program, and shall be designated as an AISC Certified Plant, Category IBR (Intermediate Steel Bridge), or Category ABR (Advanced Steel Bridge) or Category HYD (Hydraulic Steel Structure). In addition to meeting one or more of the AISC Quality Certification Programs, the fabricator shall hold a Fracture Critical Endorsement (FC). All qualifications shall be current at time of offer and shall remain current throughout the duration of the contract. All welding and inspection of welds shall be done in accordance with AWS D1.5. Welders, tackers, and operators shall be qualified in accordance with AWS D1.5.

The resulting supply contract will be issued on a Firm Fixed Price basis to the lowest priced offeror who submits a technical proposal that is otherwise technically acceptable ("Acceptable") when reviewed against all of the Factors outlined in the RFP. The anticipated award date is on or about 30 September 2018.

The solicitation will be issued via Internet only on Feb Biz Opps Website at http://www.fbo.gov. It is the contractors' responsibility to monitor the above-listed internet address for any posted changes. Any and all amendments posted shall be signed and submitted with the offer.

Solicitation issue date is anticipated to be on or about 1 July 2018. Quotes are anticipated to be due on or about 1 August 2018. Contractors must be registered and current with System for Award Management (SAM) in order to receive a Government contract award. To register, the SAM Internet address is: http://www.sam.gov.

The Previous Contract Information: This is a new requirement, no previous contract information is available.

Any questions and inquiries related to this solicitation shall be submitted through Bidder's Inquiry only.

The Solicitation Number is: W912BV18R0030

The Bidder Inquiry Key is: NEI9PZ-DKBZ6Q

Sustainability clauses are currently not anticipated for this requirement.

"One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements."

The tentative general summary of the work to be performed is to fabricate at least eighteen (18) stop-logs and at least one (1) lifting beam. Perform a hang test and stacking test for each stoplog and a hang test and proof load test for each lifting beam fabricated. The Contractor shall provide all plant, materials, equipment, labor, instruments, tools, subcontractors (per FAR 52.219-14(c)(2) "Supplies (other than procurement from a nonmanufacturer of such supplies). The concern shall perform work for at least 50 percent of the cost of manufacturing the supplies, not including the cost of materials."), supervision, management, transportation, and travel necessary to complete all work in accordance with this summary of work, the attached drawings, the specifications, and all other contract documents and requirements. The Government will provide no materials, equipment, transportation, or labor.

The work required is summarized as follows:

a. Fabrication and painting of stoplogs and lifting beam(s);

b. Hang testing and adjustment by counterweighting for plumb in the longitudinal and transverse directions of each stoplog and lifting beam fabricated;

c. Proof load testing and marking per ASME B30.20 of each lifting beam fabricated; and

d. Delivery of stoplogs and lifting beam(s)

Tentatively Contractor Submittal Requirements include: The contractor shall submit the documents listed below to the Contracting Officer's Representative (COR) and the Contracting Officer prior to starting work. All submittals, other than copies of contracts, shall be typed and the original and one copy shall be furnished the Contracting Officer (unless the documentation is provided digitally). Unless specifically noted in the requirement all submittals shall be provided free of proprietary markings and shall become property of the Government or shall have Governmental Rights assigned. If the Contracting Officer determines any of the submittals do not comply with specifications, the contractor shall resubmit these documents within five (5) business days.

- Names of project manager and their alternate (submit prior to initiation of work and prior to changing designated employees).

- Quality Control Plan (submit prior to initiation of work).

- Work plan/Production schedule (submit prior to initiation of work, must be submitted within 30 days of contract award).

- Contractor's, manufacturer's, or fabricator's drawings
- Descriptive literature including (but not limited to) catalog cuts, diagrams, operating charts or curves

- Test reports

- O & M manuals (including parts list)

- Certifications

- Warranties

TULSA DISTRICT CORPS OF ENGINEERS
DOUGLAS BUFFINGTON, CECT-SWT-E
2488 East 81st Street
TULSA, OK 74137
918-669-7078
Douglas.D.Buffington@USACE.Army.mil
FAX: (918) 669-7436/7495

.

Added: May 29, 2018 4:25 pm

Pre-solicitation Notice

Stop-Log Procurement

Navigation Project Office, Sallisaw, Oklahoma

W912BV18R0030

U.S. Army Corps of Engineers, Southwestern Division (SWD), Tulsa District (SWT) intends to issue a solicitation, W912BV18R0030 to procure eighteen (18) stop-logs (a hydraulic steel structure which could also be called a portable bulkhead or portable water retention gate) and at least one (1) lifting beam as a supply contract.

The solicitation will be a small business set-aside supply procurement. The North American Industrial Classification System (NAICS) Code is 332312 (Fabricated Structural Metal Manufacturing) and the applicable Small Business Size Standard, as established by the U.S. Small Business Administration, is 500 Employees. The fabricating plant and fabricator shall be certified under the AISC (American Institute of Steel Construction) Quality Certification Program, and shall be designated as an AISC Certified Plant, Category IBR (Intermediate Steel Bridge), or Category ABR (Advanced Steel Bridge) or Category HYD (Hydraulic Steel Structure). In addition to meeting one or more of the AISC Quality Certification Programs, the fabricator shall hold a Fracture Critical Endorsement (FC). All qualifications shall be current at time of offer and shall remain current throughout the duration of the contract. All welding and inspection of welds shall be done in accordance with AWS D1.5. Welders, tackers, and operators shall be qualified in accordance with AWS D1.5.

The resulting supply contract will be issued on a Firm Fixed Price basis to the lowest priced offeror who submits a technical proposal that is otherwise technically acceptable ("Acceptable") when reviewed against all of the Factors outlined in the RFP. The anticipated award date is on or about 30 September 2018.

The solicitation will be issued via Internet only on Feb Biz Opps Website at http://www.fbo.gov. It is the contractors' responsibility to monitor the above-listed internet address for any posted changes. Any and all amendments posted shall be signed and submitted with the offer.

Solicitation issue date is anticipated to be on or about 1 July 2018. Quotes are anticipated to be due on or about 1 August 2018. Contractors must be registered and current with System for Award Management (SAM) in order to receive a Government contract award. To register, the SAM Internet address is: http://www.sam.gov.

The Previous Contract Information: This is a new requirement, no previous contract information is available.

Any questions and inquiries related to this solicitation shall be submitted through Bidder's Inquiry only.

The Solicitation Number is: W912BV18R0030

The Bidder Inquiry Key is: NEI9PZ-DKBZ6Q

Sustainability clauses are currently not anticipated for this requirement.

"One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements."

The tentative general summary of the work to be performed is to fabricate at least eighteen (18) stop-logs and at least one (1) lifting beam. Perform a hang test and stacking test for each stoplog and a hang test and proof load test for each lifting beam fabricated. The Contractor shall provide all plant, materials, equipment, labor, instruments, tools, subcontractors (per FAR 52.219-14(c)(2) "Supplies (other than procurement from a nonmanufacturer of such supplies). The concern shall perform work for at least 50 percent of the cost of manufacturing the supplies, not including the cost of materials."), supervision, management, transportation, and travel necessary to complete all work in accordance with this summary of work, the attached drawings, the specifications, and all other contract documents and requirements. The Government will provide no materials, equipment, transportation, or labor.

The work required is summarized as follows:

     a. Fabrication and painting of stoplogs and lifting beam(s);

     b. Hang testing and adjustment by counterweighting for plumb in the longitudinal and transverse directions of each stoplog and lifting beam fabricated;

     c. Proof load testing and marking per ASME B30.20 of each lifting beam fabricated; and

     d. Delivery of stoplogs and lifting beam(s)

Tentatively Contractor Submittal Requirements include: The contractor shall submit the documents listed below to the Contracting Officer's Representative (COR) and the Contracting Officer prior to starting work. All submittals, other than copies of contracts, shall be typed and the original and one copy shall be furnished the Contracting Officer (unless the documentation is provided digitally). Unless specifically noted in the requirement all submittals shall be provided free of proprietary markings and shall become property of the Government or shall have Governmental Rights assigned. If the Contracting Officer determines any of the submittals do not comply with specifications, the contractor shall resubmit these documents within five (5) business days.

     - Names of project manager and their alternate (submit prior to initiation of work and prior to changing designated employees).

     - Quality Control Plan (submit prior to initiation of work).

     - Work plan/Production schedule (submit prior to initiation of work, must be submitted within 30 days of contract award).

     - Contractor's, manufacturer's, or fabricator's drawings

     - Descriptive literature including (but not limited to) catalog cuts, diagrams, operating charts or curves

     - Test reports

     - O&M manuals (including parts list)

     - Certifications

     - Warranties

TULSA DISTRICT CORPS OF ENGINEERS
DOUGLAS BUFFINGTON, CECT-SWT-E
2488 East 81st Street
TULSA, OK 74137
918-669-7078
Douglas.D.Buffington@USACE.Army.mil
FAX: (918) 669-7436/7495