Provide a crane and operator at Fort Meade Army Base, MD.
Closed Solicitation Posted
- Solicitation number
- W25G1V24Q0102
- Agency
-
Department of the Army
Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- Place of performance
- Fort George G Meade, Maryland 20755, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army is seeking to procure the services of a crane and operator to support the de-installation and removal of an AN/FSC-78 Satellite Antenna located at Fort Meade Army Base in Maryland. The contractor will be required to provide a 300-ton crane for approximately 10 working days, a 110-ton crane for 15 working days, and a 60-ton crane or equivalent for 4 non-consecutive days to offload and load 20-foot shipping containers. The evaluation criteria will consider price, delivery, and past performance, and offers must be submitted by 4:30 pm on August 1, 2024.
This solicitation is not set-aside for any specific program. The agency has not identified any potential incumbents or current contractors. The value of the contract has not been specified, but the largest lift required is 53,000 pounds at a radius of approximately 58 feet. All work must be performed at the SATCOM facility located at 8901 Love Road, Fort Meade, MD 20755.
Notice text
See attached RFQ W51AA124Q0102 - Signed form MUST be returned with pricing, signature & date. A breakdown of pricing shall be sent also to michele.j.morgan.civ@army.mil
The contractor shall provide a crane and operator described herein this Performance Work Statement (PWS). In addition, the contractor shall also provide logistical support for that crane during the entire duration of this project. Tobyhanna Army Depot (TYAD) has been task with the de-installation and removal of an AN/FSC-78 Satellite Antenna located on Fort Meade Army Base, MD.
The contractor will provide the recommended crane which is the Demag AC250, the Liebherr LTM1250-6.1 or equivalent capacity with 2 hoist gears. The largest pick is the 60ft diameter parabolic reflector weighing 53,000 lbs., 85 feet in the air and a radius of approximately 58ft. The heaviest pick is 56,000 lbs. ring girder 60ft in the air. Two hoist gears and 18 foot jib will be needed to flip the Ring Girder. This crane will be needed for 10 working days. Follow-on work will require a 110T crane with a minimum of 100ft boom to further disassemble large components, concrete base sections and to load concrete panels onto flatbed trucks. This crane will be needed for 15 working days. The 300T crane will be required at the project site when needed by the TYAD Lead approximately on day 7 (09 Sep 2024) through approximately day 16 (20 Sept 2024). The biggest object that this crane will have to lift is of weight 53,000 pounds, reference Technical Exhibit 1, Antenna Parabolic. The 75T crane will be required at the project site when needed by the TYAD Lead on approximately 30 Sept 2024 through approximately 18 Oct 2024. A 60T crane or equivalent will be needed to Offload/Load 20 foot shipping containers. The crane will be needed for offload on or about 3 Sept 2024 and again on or about the week ending 25 Oct 2024. A minimum 48 hour notice will be given to the crane contractor once delivery and pick up dates are provided from transportation
All work will be performed at and all deliveries will be made to:
SATCOM
ATTN: WTN Removal
8901 Love Road
Fort Meade, MD 20755
Files
| File | Type | Posted |
|---|---|---|
| W51AA124Q0102.pdf | ||
| WageRate.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Repair/Replace Overhead Cranes on Fort Drum | MICC Fort Drum | Total Small Business | |
| Vandenberg Crane Replacement | Air Force Sustainment Center | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity