Power Supply

****ATTENTION****FORMAL COMMUNICATION RELATED TO THIS ACQUISITION MUST BE DIRECTED TO Fletcher Seldon, Contracting Specialist, via emailfletcher.a.seldon.civ@mail.mil.No telephone requests will be accepted.

NOUN: Power Supply; PRON: D19H0290D1, NSN: 6130-01-4445562, PN: 13508167, Quantity: 15, applicable to the PATRIOT SYSTEM (D6).  F.O.B. Destination with delivery to SR Headquarters US Army Aviation and Missiles, AMCOM Fleet MGT Center AFMC, Holbrook Road BLDG 738, Fort Bliss, TX 79916-5801

This item will be acquired for the second or subsequent time directly from the actual manufacturer as indicated. This part must be acquired from a manufacturing source(s) that is specified on the Source Control Drawing (or Selected Item Drawing or Altered Item Drawing). Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part nor use of a second source part in the intended application. The technical factors supporting this recommendation for other than full and open competitive acquisition are based on a review and analysis of the available technical data associated with this part per the requirements of DFARS PGI 217.7506, Spare Parts Breakout Program.

The technical data for this part has undergone full screening per the DFARS PGI 217.7506, Spare Parts Breakout Program. The assigned AMC/AMSC is 3B. This item will be acquired for the second or subsequent time directly from the actual manufacturer as indicated. This part must be acquired from a manufacturing source(s) that is specified on the Source Control Drawing (or Selected Item Drawing or Altered Item Drawing). Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part nor use of a second source part in the intended application. Source control drawing - restrict to source

The Government has rights to the technical data, the data package is complete, and there are no technical data, engineering, tooling or manufacturing restrictions. No Technical Data Packages will be mailed out, all offerors shall be registered in BetaSam and Joint Certification Program (JCP) certified to obtain the Technical Data Package for this requirement.  All responsible sources may submit an offer, which shall be considered by the Agency.

“WARNING- THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RETRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, et. seq.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C., APP. 2401-2402 et. seq. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.