Paint Creek Gearbox Rebuild
Closed Solicitation Posted
- Solicitation number
- W9123724Q0122
- Agency
-
ENDIST Huntington
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Department of the Army Corps of Engineers Engineering District Huntington is seeking a contractor to pick up, clean, inspect, rehabilitate, test, and deliver one (1) right angle gearbox for the Paint Creek Dam. The gearbox, a Litton Right Angle Gearbox with Serial Number 3H-73650, must be rebuilt in accordance with the manufacturer's recommendations and all applicable standards, including AGMA 6001-E08 and AGMA 6013-A06. The contractor will be responsible for transportation of the gearbox to and from their facility. The work must be completed by September 3, 2024.
This solicitation is set aside for small businesses. The NAICS code is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, and the PSC code is J028-P, Maint/Repair/Rebuild Of Equipment- Engines, Turbines, And Components. No information is provided about potential incumbents or the contract's budget range.
Notice text
These specifications cover all work required to pick up, clean, inspect, rehabilitate, test, anddeliver one (1) right angle gearbox to Paint Creek Dam. The gearbox is a Litton Right Angle Gearboxwith Serial Number 3H-73650. Specifications for the gearbox are as follows: Gear Ratio is 14.5:1, RPMinput is 1155, Output Torque is 4482, HP Rating is 6.37, and the Frame is U-40. Refer to drawingnumber O16b-UPC3-52.3 and the gearbox name plate for more information. The gearbox shall be rebuiltin accordance with the manufacturer?s recommendations to for the items listed below. All work shallconform to all applicable standards including AGMA 6001-E08 and AGMA 6013-A06. The originalmanufacturer?s specifications shall be followed and documented for the required settings of bearinglaterals, gear backlash, gear tooth mesh and profiles, housing fits, housing continuity, critical dimensions,torque values, and proper operational parameters. The Contractor shall also be responsible fortransportation of the gearbox to and from their facility.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Procurement of Various Gearboxes | Coast Guard | No set-aside | |
| Gearbox | Aviation | No set-aside | |
| Gear Rack, per Drawing # 8767202, Revision Y, for 155MM M284 Cannon, for the Watervliet Arsenal | ACC Warren | Total Small Business | |
| Propl gear reduce | Naval Supply Systems Command | No set-aside | |
| Remanufacture of KC-135 Gearbox Assembly, NSN 1680007986073FL | Air Force Sustainment Center | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity